| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240210070934.2549994-23-swboyd@chromium.org>
Date: Fri, 9 Feb 2024 23:09:33 -0800
From: Stephen Boyd <swboyd@...omium.org>
To: chrome-platform@...ts.linux.dev
Cc: linux-kernel@...r.kernel.org,
patches@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-arm-msm@...r.kernel.org,
Douglas Anderson <dianders@...omium.org>,
Pin-yen Lin <treapking@...omium.org>,
cros-qcom-dts-watchers@...omium.org,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Subject: [PATCH 22/22] arm64: dts: qcom: sc7180-trogdor: Wire up USB and DP to usb-c-connectors
Fully describe the USB type-c and DP topology on sc7180 Trogdor devices.
Most Trogdor devices have two USB type-c ports (i.e. usb-c-connector
nodes), but quackingstick only has one. Also, clamshell devices such as
Lazor have a USB webcam connected to the USB hub, while detachable
devices such as Wormdingler don't have a webcam, or a USB type-a
connector. Instead they have the pogo pins for the detachable keyboard.
Fully describing the topology like this will let us expose information
about what devices are connected to which physical USB connector (type-A
or type-C) and which port is connected to an external display for DP.
Cc: <cros-qcom-dts-watchers@...omium.org>
Cc: Andy Gross <agross@...nel.org>
Cc: Bjorn Andersson <andersson@...nel.org>
Cc: Konrad Dybcio <konrad.dybcio@...aro.org>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: Conor Dooley <conor+dt@...nel.org>
Cc: <linux-arm-msm@...r.kernel.org>
Cc: <devicetree@...r.kernel.org>
Cc: Pin-yen Lin <treapking@...omium.org>
Signed-off-by: Stephen Boyd <swboyd@...omium.org>
---
.../dts/qcom/sc7180-trogdor-clamshell.dtsi | 21 +++
.../boot/dts/qcom/sc7180-trogdor-coachz.dtsi | 47 +++++
.../dts/qcom/sc7180-trogdor-detachable.dtsi | 13 ++
.../dts/qcom/sc7180-trogdor-homestar.dtsi | 47 +++++
.../dts/qcom/sc7180-trogdor-kingoftown.dts | 55 ++++++
.../boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 55 ++++++
.../boot/dts/qcom/sc7180-trogdor-pazquel.dtsi | 55 ++++++
.../boot/dts/qcom/sc7180-trogdor-pompom.dtsi | 44 +++++
.../qcom/sc7180-trogdor-quackingstick.dtsi | 31 ++++
.../dts/qcom/sc7180-trogdor-wormdingler.dtsi | 47 +++++
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 175 ++++++++++++++++++
11 files changed, 590 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-clamshell.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-clamshell.dtsi
index bcf3df463f80..96137202fc64 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-clamshell.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-clamshell.dtsi
@@ -7,3 +7,24 @@
/* This file must be included after sc7180-trogdor.dtsi */
#include <arm/cros-ec-keyboard.dtsi>
+
+/ {
+ usb-a-connector {
+ compatible = "usb-a-connector";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_a0_hs: endpoint@0 {
+ reg = <0>;
+ /* Remote endpoint filled in by board */
+ };
+
+ usb_a0_ss: endpoint@1 {
+ reg = <1>;
+ /* Remote endpoint filled in by board */
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
index 6e6a4643c4dd..4cf5b1e20b27 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -135,6 +135,17 @@ skin-temp-thermistor@1 {
};
};
+&pogo_pins {
+ keyboard@4 {
+ compatible = "usb18d1,504c";
+ reg = <4>;
+ };
+};
+
+&pogo_pins_in {
+ remote-endpoint = <&usb_hub_dfp4_hs>;
+};
+
&pp1800_uf_cam {
status = "okay";
};
@@ -176,6 +187,42 @@ &sound_multimedia0_codec {
sound-dai = <&adau7002>;
};
+&usb_c0_hs {
+ remote-endpoint = <&usb_hub_dfp1_hs>;
+};
+
+&usb_c0_ss_rxtx {
+ remote-endpoint = <&usb_hub_dfp1_ss>;
+};
+
+&usb_c1_hs {
+ remote-endpoint = <&usb_hub_dfp2_hs>;
+};
+
+&usb_c1_ss_rxtx {
+ remote-endpoint = <&usb_hub_dfp2_ss>;
+};
+
+&usb_hub_dfp1_hs {
+ remote-endpoint = <&usb_c0_hs>;
+};
+
+&usb_hub_dfp1_ss {
+ remote-endpoint = <&usb_c0_ss_rxtx>;
+};
+
+&usb_hub_dfp2_hs {
+ remote-endpoint = <&usb_c1_hs>;
+};
+
+&usb_hub_dfp2_ss {
+ remote-endpoint = <&usb_c1_ss_rxtx>;
+};
+
+&usb_hub_dfp4_hs {
+ remote-endpoint = <&pogo_pins_in>;
+};
+
/* PINCTRL - modifications to sc7180-trogdor.dtsi */
&en_pp3300_dx_edp {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-detachable.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-detachable.dtsi
index ab0f30288871..b24a0213a477 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-detachable.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-detachable.dtsi
@@ -5,6 +5,19 @@
* Copyright 2024 Google LLC.
*/
+/ {
+ pogo_pins: pogo-pin-connector {
+ compatible = "google,pogo-pin-connector";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* Detachable keyboard populated for each board */
+ port {
+ pogo_pins_in: endpoint {
+ };
+ };
+ };
+};
+
&cros_ec {
keyboard-controller {
compatible = "google,cros-ec-keyb-switches";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
index a86a6c5c3f67..9e32c984ab32 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -162,6 +162,17 @@ skin-temp-thermistor@1 {
};
};
+&pogo_pins {
+ keyboard@3 {
+ compatible = "usb18d1,5052";
+ reg = <3>;
+ };
+};
+
+&pogo_pins_in {
+ remote-endpoint = <&usb_hub_dfp3_hs>;
+};
+
&pp1800_uf_cam {
status = "okay";
};
@@ -190,6 +201,42 @@ &sound_multimedia1_codec {
sound-dai = <&max98360a>, <&max98360a_1>, <&max98360a_2>, <&max98360a_3> ;
};
+&usb_c0_hs {
+ remote-endpoint = <&usb_hub_dfp2_hs>;
+};
+
+&usb_c0_ss_rxtx {
+ remote-endpoint = <&usb_hub_dfp2_ss>;
+};
+
+&usb_c1_hs {
+ remote-endpoint = <&usb_hub_dfp4_hs>;
+};
+
+&usb_c1_ss_rxtx {
+ remote-endpoint = <&usb_hub_dfp4_ss>;
+};
+
+&usb_hub_dfp2_hs {
+ remote-endpoint = <&usb_c0_hs>;
+};
+
+&usb_hub_dfp2_ss {
+ remote-endpoint = <&usb_c0_ss_rxtx>;
+};
+
+&usb_hub_dfp3_hs {
+ remote-endpoint = <&pogo_pins_in>;
+};
+
+&usb_hub_dfp4_hs {
+ remote-endpoint = <&usb_c1_hs>;
+};
+
+&usb_hub_dfp4_ss {
+ remote-endpoint = <&usb_c1_ss_rxtx>;
+};
+
&wifi {
qcom,ath10k-calibration-variant = "GO_HOMESTAR";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
index 655bea928e52..476c0a2f30da 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
@@ -78,6 +78,61 @@ &pp3300_dx_edp {
gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
};
+&usb_a0_hs {
+ remote-endpoint = <&usb_hub_dfp3_hs>;
+};
+
+&usb_a0_ss {
+ remote-endpoint = <&usb_hub_dfp3_ss>;
+};
+
+&usb_c0_hs {
+ remote-endpoint = <&usb_hub_dfp1_hs>;
+};
+
+&usb_c0_ss_rxtx {
+ remote-endpoint = <&usb_hub_dfp1_ss>;
+};
+
+&usb_c1_hs {
+ remote-endpoint = <&usb_hub_dfp2_hs>;
+};
+
+&usb_c1_ss_rxtx {
+ remote-endpoint = <&usb_hub_dfp2_ss>;
+};
+
+&usb_hub_2_x {
+ camera@4 {
+ compatible = "usb4f2,b75a";
+ reg = <4>;
+ };
+};
+
+&usb_hub_dfp1_hs {
+ remote-endpoint = <&usb_c0_hs>;
+};
+
+&usb_hub_dfp1_ss {
+ remote-endpoint = <&usb_c0_ss_rxtx>;
+};
+
+&usb_hub_dfp2_hs {
+ remote-endpoint = <&usb_c1_hs>;
+};
+
+&usb_hub_dfp2_ss {
+ remote-endpoint = <&usb_c1_ss_rxtx>;
+};
+
+&usb_hub_dfp3_hs {
+ remote-endpoint = <&usb_a0_hs>;
+};
+
+&usb_hub_dfp3_ss {
+ remote-endpoint = <&usb_a0_ss>;
+};
+
&wifi {
qcom,ath10k-calibration-variant = "GO_KINGOFTOWN";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
index c3fd6760de7a..2603607ebd80 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -68,6 +68,61 @@ &trackpad {
interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
};
+&usb_hub_2_x {
+ camera@1 {
+ compatible = "usb408,a092";
+ reg = <1>;
+ };
+};
+
+&usb_a0_hs {
+ remote-endpoint = <&usb_hub_dfp3_hs>;
+};
+
+&usb_a0_ss {
+ remote-endpoint = <&usb_hub_dfp3_ss>;
+};
+
+&usb_c0_hs {
+ remote-endpoint = <&usb_hub_dfp2_hs>;
+};
+
+&usb_c0_ss_rxtx {
+ remote-endpoint = <&usb_hub_dfp2_ss>;
+};
+
+&usb_c1_hs {
+ remote-endpoint = <&usb_hub_dfp4_hs>;
+};
+
+&usb_c1_ss_rxtx {
+ remote-endpoint = <&usb_hub_dfp4_ss>;
+};
+
+&usb_hub_dfp2_hs {
+ remote-endpoint = <&usb_c0_hs>;
+};
+
+&usb_hub_dfp2_ss {
+ remote-endpoint = <&usb_c0_ss_rxtx>;
+};
+
+&usb_hub_dfp3_hs {
+ remote-endpoint = <&usb_a0_hs>;
+};
+
+&usb_hub_dfp3_ss {
+ remote-endpoint = <&usb_a0_ss>;
+};
+
+&usb_hub_dfp4_hs {
+ remote-endpoint = <&usb_c1_hs>;
+};
+
+&usb_hub_dfp4_ss {
+ remote-endpoint = <&usb_c1_ss_rxtx>;
+};
+
&wifi {
qcom,ath10k-calibration-variant = "GO_LAZOR";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
index 60ccd3abddfc..dee06c64b59a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
@@ -83,6 +83,61 @@ &pp3300_dx_edp {
gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
};
+&usb_a0_hs {
+ remote-endpoint = <&usb_hub_dfp3_hs>;
+};
+
+&usb_a0_ss {
+ remote-endpoint = <&usb_hub_dfp3_ss>;
+};
+
+&usb_c0_hs {
+ remote-endpoint = <&usb_hub_dfp1_hs>;
+};
+
+&usb_c0_ss_rxtx {
+ remote-endpoint = <&usb_hub_dfp1_ss>;
+};
+
+&usb_c1_hs {
+ remote-endpoint = <&usb_hub_dfp2_hs>;
+};
+
+&usb_c1_ss_rxtx {
+ remote-endpoint = <&usb_hub_dfp2_ss>;
+};
+
+&usb_hub_2_x {
+ camera@4 {
+ compatible = "usb5c8,b03";
+ reg = <4>;
+ };
+};
+
+&usb_hub_dfp1_hs {
+ remote-endpoint = <&usb_c0_hs>;
+};
+
+&usb_hub_dfp1_ss {
+ remote-endpoint = <&usb_c0_ss_rxtx>;
+};
+
+&usb_hub_dfp2_hs {
+ remote-endpoint = <&usb_c1_hs>;
+};
+
+&usb_hub_dfp2_ss {
+ remote-endpoint = <&usb_c1_ss_rxtx>;
+};
+
+&usb_hub_dfp3_hs {
+ remote-endpoint = <&usb_a0_hs>;
+};
+
+&usb_hub_dfp3_ss {
+ remote-endpoint = <&usb_a0_ss>;
+};
+
/* PINCTRL - modifications to sc7180-trogdor.dtsi */
&en_pp3300_dx_edp {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
index 43b2583f0f26..88ffa2331cd2 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
@@ -180,10 +180,54 @@ &sound {
dmic-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
};
+&usb_a0_hs {
+ remote-endpoint = <&usb_hub_dfp4_hs>;
+};
+
+&usb_a0_ss {
+ remote-endpoint = <&usb_hub_dfp4_ss>;
+};
+
+&usb_c0_hs {
+ remote-endpoint = <&usb_hub_dfp3_hs>;
+};
+
+&usb_c0_ss_rxtx {
+ remote-endpoint = <&usb_hub_dfp3_ss>;
+};
+
&usb_c1 {
status = "disabled";
};
+&usb_hub_2_x {
+ camera@1 {
+ compatible = "usb4f2,b718";
+ reg = <1>;
+ };
+
+ camera@2 {
+ compatible = "usb13d3,56e9";
+ reg = <2>;
+ };
+};
+
+&usb_hub_dfp3_hs {
+ remote-endpoint = <&usb_c0_hs>;
+};
+
+&usb_hub_dfp3_ss {
+ remote-endpoint = <&usb_c0_ss_rxtx>;
+};
+
+&usb_hub_dfp4_hs {
+ remote-endpoint = <&usb_a0_hs>;
+};
+
+&usb_hub_dfp4_ss {
+ remote-endpoint = <&usb_a0_ss>;
+};
+
&wifi {
qcom,ath10k-calibration-variant = "GO_POMPOM";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
index 00229b1515e6..d0d9871b74cb 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
@@ -104,6 +104,17 @@ &sdhc_2 {
status = "okay";
};
+&pogo_pins {
+ keyboard@1 {
+ compatible = "usb18d1,505b";
+ reg = <1>;
+ };
+};
+
+&pogo_pins_in {
+ remote-endpoint = <&usb_hub_dfp1_hs>;
+};
+
&pp1800_uf_cam {
status = "okay";
};
@@ -128,11 +139,31 @@ pp3300_disp_on: &pp3300_dx_edp {
gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
};
+&usb_c0_hs {
+ remote-endpoint = <&usb_hub_dfp2_hs>;
+};
+
+&usb_c0_ss_rxtx {
+ remote-endpoint = <&usb_hub_dfp2_ss>;
+};
+
/* This board only has 1 USB Type-C port. */
&usb_c1 {
status = "disabled";
};
+&usb_hub_dfp2_hs {
+ remote-endpoint = <&usb_c0_hs>;
+};
+
+&usb_hub_dfp2_ss {
+ remote-endpoint = <&usb_c0_ss_rxtx>;
+};
+
+&usb_hub_dfp1_hs {
+ remote-endpoint = <&pogo_pins_in>;
+};
+
/* PINCTRL - modifications to sc7180-trogdor.dtsi */
/*
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
index 1d9fc61b6550..409d332fbc13 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
@@ -180,6 +180,17 @@ skin-temp-thermistor@1 {
};
};
+&pogo_pins {
+ keyboard@3 {
+ compatible = "usb18d1,5057";
+ reg = <3>;
+ };
+};
+
+&pogo_pins_in {
+ remote-endpoint = <&usb_hub_dfp3_hs>;
+};
+
&pp1800_uf_cam {
status = "okay";
};
@@ -196,6 +207,42 @@ &pp2800_wf_cam {
status = "okay";
};
+&usb_c0_hs {
+ remote-endpoint = <&usb_hub_dfp2_hs>;
+};
+
+&usb_c0_ss_rxtx {
+ remote-endpoint = <&usb_hub_dfp2_ss>;
+};
+
+&usb_c1_hs {
+ remote-endpoint = <&usb_hub_dfp4_hs>;
+};
+
+&usb_c1_ss_rxtx {
+ remote-endpoint = <&usb_hub_dfp3_ss>;
+};
+
+&usb_hub_dfp2_hs {
+ remote-endpoint = <&usb_c0_hs>;
+};
+
+&usb_hub_dfp2_ss {
+ remote-endpoint = <&usb_c0_ss_rxtx>;
+};
+
+&usb_hub_dfp4_hs {
+ remote-endpoint = <&usb_c1_hs>;
+};
+
+&usb_hub_dfp3_ss {
+ remote-endpoint = <&usb_c1_ss_rxtx>;
+};
+
+&usb_hub_dfp3_hs {
+ remote-endpoint = <&pogo_pins_in>;
+};
+
&wifi {
qcom,ath10k-calibration-variant = "GO_WORMDINGLER";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 46aaeba28604..ee08a4ecade9 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -650,6 +650,12 @@ cros_ec: ec@0 {
pinctrl-0 = <&ap_ec_int_l>;
spi-max-frequency = <3000000>;
+ cros_ec_gpio: gpio {
+ compatible = "google,cros-ec-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
cros_ec_pwm: pwm {
compatible = "google,cros-ec-pwm";
#pwm-cells = <1>;
@@ -662,6 +668,65 @@ i2c_tunnel: i2c-tunnel {
#size-cells = <0>;
};
+ typec-switch {
+ compatible = "google,cros-ec-typec-switch";
+ no-hpd;
+ mode-switch;
+ mux-gpios = <&cros_ec_gpio 42 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dp_ml0_ml1: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&mdss_dp_out>;
+ data-lanes = <0 1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_c0_ss_rxtx: endpoint@0 {
+ reg = <0>;
+ /* Endpoint filled in by board */
+ };
+
+ usb_c1_ss_rxtx: endpoint@1 {
+ reg = <1>;
+ /* Endpoint filled in by board */
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cros_typec_c0_ss: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usb_c0_ss>;
+ data-lanes = <0 1 2 3>;
+ };
+
+ cros_typec_c1_ss: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&usb_c1_ss>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+
+ };
+
typec {
compatible = "google,cros-ec-typec";
#address-cells = <1>;
@@ -674,6 +739,25 @@ usb_c0: connector@0 {
power-role = "dual";
data-role = "host";
try-power-role = "source";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usb_c0_hs: endpoint {
+ /* Endpoint filled in by board */
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ usb_c0_ss: endpoint {
+ remote-endpoint = <&cros_typec_c0_ss>;
+ };
+ };
+ };
};
usb_c1: connector@1 {
@@ -683,6 +767,25 @@ usb_c1: connector@1 {
power-role = "dual";
data-role = "host";
try-power-role = "source";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usb_c1_hs: endpoint {
+ /* Endpoint filled in by board */
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ usb_c1_ss: endpoint {
+ remote-endpoint = <&cros_typec_c1_ss>;
+ };
+ };
+ };
};
};
};
@@ -794,6 +897,7 @@ &mdss_dp {
&mdss_dp_out {
data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>;
+ remote-endpoint = <&dp_ml0_ml1>;
};
&mdss_dsi0 {
@@ -965,6 +1069,41 @@ usb_hub_2_x: hub@1 {
reg = <1>;
vdd-supply = <&pp3300_hub>;
peer-hub = <&usb_hub_3_x>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_hub_2_x_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ usb_hub_dfp1_hs: endpoint {
+ /* Remote endpoint filled in by board */
+ };
+ };
+ port@2 {
+ reg = <2>;
+ usb_hub_dfp2_hs: endpoint {
+ /* Remote endpoint filled in by board */
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ usb_hub_dfp3_hs: endpoint {
+ /* Remote endpoint filled in by board */
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ usb_hub_dfp4_hs: endpoint {
+ /* Remote endpoint filled in by board */
+ };
+ };
+ };
};
/* 3.x hub on port 2 */
@@ -973,6 +1112,42 @@ usb_hub_3_x: hub@2 {
reg = <2>;
vdd-supply = <&pp3300_hub>;
peer-hub = <&usb_hub_2_x>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_hub_3_x_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ usb_hub_dfp1_ss: endpoint {
+ /* Remote endpoint filled in by board */
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ usb_hub_dfp2_ss: endpoint {
+ /* Remote endpoint filled in by board */
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ usb_hub_dfp3_ss: endpoint {
+ /* Remote endpoint filled in by board */
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ usb_hub_dfp4_ss: endpoint {
+ /* Remote endpoint filled in by board */
+ };
+ };
+ };
};
};
--
https://chromeos.dev
Powered by blists - more mailing lists