| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240211123000.3359365-22-max.kellermann@ionos.com>
Date: Sun, 11 Feb 2024 13:29:46 +0100
From: Max Kellermann <max.kellermann@...os.com>
To: linux-kernel@...r.kernel.org
Cc: Max Kellermann <max.kellermann@...os.com>
Subject: [PATCH v3 21/35] percpu-refcount.h: move declarations to percpu-refcount_types.h
By providing declarations in a lean header, we can reduce header
dependencies.
Signed-off-by: Max Kellermann <max.kellermann@...os.com>
---
drivers/target/target_core_pr.c | 1 +
drivers/target/target_core_xcopy.c | 1 +
include/linux/blkdev.h | 2 +-
include/linux/bpf-cgroup-defs.h | 2 +-
include/linux/bpf.h | 2 +-
include/linux/cgroup-defs.h | 2 +-
include/linux/cgroup.h | 1 +
include/linux/percpu-refcount.h | 64 +-----------------------
include/linux/percpu-refcount_types.h | 71 +++++++++++++++++++++++++++
include/linux/slab.h | 1 -
include/target/target_core_base.h | 2 +-
11 files changed, 80 insertions(+), 69 deletions(-)
create mode 100644 include/linux/percpu-refcount_types.h
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index 6ed604a164f8..0ee29c16a161 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -20,6 +20,7 @@
#include <linux/fcntl.h>
#include <linux/fs.h>
#include <linux/kref.h>
+#include <linux/percpu-refcount.h>
#include <scsi/scsi_proto.h>
#include <asm/unaligned.h>
diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c
index df06ec0f75fe..37d306570f8a 100644
--- a/drivers/target/target_core_xcopy.c
+++ b/drivers/target/target_core_xcopy.c
@@ -18,6 +18,7 @@
#include <linux/rculist.h>
#include <linux/completion.h>
#include <linux/configfs.h>
+#include <linux/percpu-refcount.h>
#include <linux/ratelimit.h>
#include <linux/workqueue.h>
#include <scsi/scsi_proto.h>
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 6747965c3580..5cd0edada09d 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -18,7 +18,7 @@
#include <linux/gfp_types.h>
#include <linux/kdev_t.h>
#include <linux/rcupdate.h>
-#include <linux/percpu-refcount.h>
+#include <linux/percpu-refcount_types.h>
#include <linux/blkzoned.h>
#include <linux/sched.h>
#include <linux/uio.h> // for iov_iter_is_aligned()
diff --git a/include/linux/bpf-cgroup-defs.h b/include/linux/bpf-cgroup-defs.h
index f3b400858129..70b79fd81fee 100644
--- a/include/linux/bpf-cgroup-defs.h
+++ b/include/linux/bpf-cgroup-defs.h
@@ -5,7 +5,7 @@
#ifdef CONFIG_CGROUP_BPF
#include <linux/list.h>
-#include <linux/percpu-refcount.h>
+#include <linux/percpu-refcount_types.h>
#include <linux/workqueue_types.h>
struct bpf_prog_array;
diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index c5c435d04460..e28c74dd67ab 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -21,7 +21,7 @@
#include <linux/capability.h>
#include <linux/sched/mm.h>
#include <linux/slab.h>
-#include <linux/percpu-refcount.h>
+#include <linux/percpu-refcount_types.h>
#include <linux/stddef.h>
#include <linux/bpfptr.h>
#include <linux/btf.h>
diff --git a/include/linux/cgroup-defs.h b/include/linux/cgroup-defs.h
index 99e24f3034df..878deefba0e1 100644
--- a/include/linux/cgroup-defs.h
+++ b/include/linux/cgroup-defs.h
@@ -15,7 +15,7 @@
#include <linux/mutex_types.h>
#include <linux/rcupdate.h>
#include <linux/refcount_types.h>
-#include <linux/percpu-refcount.h>
+#include <linux/percpu-refcount_types.h>
#include <linux/percpu-rwsem.h>
#include <linux/u64_stats_sync.h>
#include <linux/workqueue.h>
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 24dcff53bd05..19a5e801f77d 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -21,6 +21,7 @@
#include <linux/ns_common.h>
#include <linux/nsproxy.h>
#include <linux/user_namespace.h>
+#include <linux/percpu-refcount.h>
#include <linux/refcount.h>
#include <linux/kernel_stat.h>
diff --git a/include/linux/percpu-refcount.h b/include/linux/percpu-refcount.h
index dd2f19ea08bd..ded13def0acd 100644
--- a/include/linux/percpu-refcount.h
+++ b/include/linux/percpu-refcount.h
@@ -50,74 +50,12 @@
#ifndef _LINUX_PERCPU_REFCOUNT_H
#define _LINUX_PERCPU_REFCOUNT_H
-#include <linux/atomic.h>
+#include <linux/percpu-refcount_types.h>
#include <linux/percpu.h>
#include <linux/rcupdate.h>
#include <linux/types.h>
#include <linux/gfp_types.h>
-struct percpu_ref;
-typedef void (percpu_ref_func_t)(struct percpu_ref *);
-
-/* flags set in the lower bits of percpu_ref->percpu_count_ptr */
-enum {
- __PERCPU_REF_ATOMIC = 1LU << 0, /* operating in atomic mode */
- __PERCPU_REF_DEAD = 1LU << 1, /* (being) killed */
- __PERCPU_REF_ATOMIC_DEAD = __PERCPU_REF_ATOMIC | __PERCPU_REF_DEAD,
-
- __PERCPU_REF_FLAG_BITS = 2,
-};
-
-/* @flags for percpu_ref_init() */
-enum {
- /*
- * Start w/ ref == 1 in atomic mode. Can be switched to percpu
- * operation using percpu_ref_switch_to_percpu(). If initialized
- * with this flag, the ref will stay in atomic mode until
- * percpu_ref_switch_to_percpu() is invoked on it.
- * Implies ALLOW_REINIT.
- */
- PERCPU_REF_INIT_ATOMIC = 1 << 0,
-
- /*
- * Start dead w/ ref == 0 in atomic mode. Must be revived with
- * percpu_ref_reinit() before used. Implies INIT_ATOMIC and
- * ALLOW_REINIT.
- */
- PERCPU_REF_INIT_DEAD = 1 << 1,
-
- /*
- * Allow switching from atomic mode to percpu mode.
- */
- PERCPU_REF_ALLOW_REINIT = 1 << 2,
-};
-
-struct percpu_ref_data {
- atomic_long_t count;
- percpu_ref_func_t *release;
- percpu_ref_func_t *confirm_switch;
- bool force_atomic:1;
- bool allow_reinit:1;
- struct rcu_head rcu;
- struct percpu_ref *ref;
-};
-
-struct percpu_ref {
- /*
- * The low bit of the pointer indicates whether the ref is in percpu
- * mode; if set, then get/put will manipulate the atomic_t.
- */
- unsigned long percpu_count_ptr;
-
- /*
- * 'percpu_ref' is often embedded into user structure, and only
- * 'percpu_count_ptr' is required in fast path, move other fields
- * into 'percpu_ref_data', so we can reduce memory footprint in
- * fast path.
- */
- struct percpu_ref_data *data;
-};
-
int __must_check percpu_ref_init(struct percpu_ref *ref,
percpu_ref_func_t *release, unsigned int flags,
gfp_t gfp);
diff --git a/include/linux/percpu-refcount_types.h b/include/linux/percpu-refcount_types.h
new file mode 100644
index 000000000000..9f4f93e8faaf
--- /dev/null
+++ b/include/linux/percpu-refcount_types.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _LINUX_PERCPU_REFCOUNT_TYPES_H
+#define _LINUX_PERCPU_REFCOUNT_TYPES_H
+
+#include <linux/atomic.h>
+#include <linux/types.h>
+
+struct percpu_ref;
+typedef void (percpu_ref_func_t)(struct percpu_ref *);
+
+/* flags set in the lower bits of percpu_ref->percpu_count_ptr */
+enum {
+ __PERCPU_REF_ATOMIC = 1LU << 0, /* operating in atomic mode */
+ __PERCPU_REF_DEAD = 1LU << 1, /* (being) killed */
+ __PERCPU_REF_ATOMIC_DEAD = __PERCPU_REF_ATOMIC | __PERCPU_REF_DEAD,
+
+ __PERCPU_REF_FLAG_BITS = 2,
+};
+
+/* @flags for percpu_ref_init() */
+enum {
+ /*
+ * Start w/ ref == 1 in atomic mode. Can be switched to percpu
+ * operation using percpu_ref_switch_to_percpu(). If initialized
+ * with this flag, the ref will stay in atomic mode until
+ * percpu_ref_switch_to_percpu() is invoked on it.
+ * Implies ALLOW_REINIT.
+ */
+ PERCPU_REF_INIT_ATOMIC = 1 << 0,
+
+ /*
+ * Start dead w/ ref == 0 in atomic mode. Must be revived with
+ * percpu_ref_reinit() before used. Implies INIT_ATOMIC and
+ * ALLOW_REINIT.
+ */
+ PERCPU_REF_INIT_DEAD = 1 << 1,
+
+ /*
+ * Allow switching from atomic mode to percpu mode.
+ */
+ PERCPU_REF_ALLOW_REINIT = 1 << 2,
+};
+
+struct percpu_ref_data {
+ atomic_long_t count;
+ percpu_ref_func_t *release;
+ percpu_ref_func_t *confirm_switch;
+ bool force_atomic:1;
+ bool allow_reinit:1;
+ struct rcu_head rcu;
+ struct percpu_ref *ref;
+};
+
+struct percpu_ref {
+ /*
+ * The low bit of the pointer indicates whether the ref is in percpu
+ * mode; if set, then get/put will manipulate the atomic_t.
+ */
+ unsigned long percpu_count_ptr;
+
+ /*
+ * 'percpu_ref' is often embedded into user structure, and only
+ * 'percpu_count_ptr' is required in fast path, move other fields
+ * into 'percpu_ref_data', so we can reduce memory footprint in
+ * fast path.
+ */
+ struct percpu_ref_data *data;
+};
+
+#endif
diff --git a/include/linux/slab.h b/include/linux/slab.h
index a7ee429c0535..df92bb41affb 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -17,7 +17,6 @@
#include <linux/log2.h>
#include <linux/overflow.h>
#include <linux/types.h>
-#include <linux/percpu-refcount.h>
#include <linux/cleanup.h>
#include <linux/hash.h>
#include <linux/mmzone.h>
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 5b9156adceca..1598a4062398 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -5,7 +5,7 @@
#include <linux/configfs.h> /* struct config_group */
#include <linux/dma-direction.h> /* enum dma_data_direction */
#include <linux/sbitmap.h>
-#include <linux/percpu-refcount.h>
+#include <linux/percpu-refcount_types.h>
#include <linux/semaphore.h> /* struct semaphore */
#include <linux/completion_types.h>
--
2.39.2
Powered by blists - more mailing lists