lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Mon, 12 Feb 2024 19:09:04 +0100
From: Robert Marko <robimarko@...il.com>
To: Andrew Lunn <andrew@...n.ch>
Cc: andersson@...nel.org, konrad.dybcio@...aro.org, hkallweit1@...il.com, 
	linux@...linux.org.uk, davem@...emloft.net, edumazet@...gle.com, 
	kuba@...nel.org, pabeni@...hat.com, ansuelsmth@...il.com, 
	linux-arm-msm@...r.kernel.org, netdev@...r.kernel.org, 
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next] net: phy: qca807x: move interface mode check to .config_init_once

On Mon, 12 Feb 2024 at 15:51, Andrew Lunn <andrew@...n.ch> wrote:
>
> On Mon, Feb 12, 2024 at 12:49:34PM +0100, Robert Marko wrote:
> > Currently, we are checking whether the PHY package mode matches the
> > individual PHY interface modes at PHY package probe time, but at that time
> > we only know the PHY package mode and not the individual PHY interface
> > modes as of_get_phy_mode() that populates it will only get called once the
> > netdev to which PHY-s are attached to is being probed and thus this check
> > will always fail and return -EINVAL.
> >
> > So, lets move this check to .config_init_once as at that point individual
> > PHY interface modes should be populated.
>
> Just for my own understanding, not directly about this patch...
>
> priv->package_mode is about PSGMII vs QSGMII for one of the SERDES
> interfaces? We expect the individual PHYs sharing that interface to
> also indicate PSGMII or QSGMII?

Yes, that is the idea, all of the individual PHY-s in the package
should be indicating
the same PHY interface mode.

>
> But what about the other SERDES, which can be connected to an SFP
> cage. You would normally set that to SGMII, or 1000BaseX. When an SFP
> module is inserted, the correct interface mode is then determined from
> the contests of the EEPROM and the PCS needs to be reconfigured. So
> i'm just wondering how this check works in this situation?

I just went to retest SFP support and it works as intended, as soon as the SFP
is inserted, PHY will get reconfigured to "combo" mode so that fifth PHY can
support both fiber (100Base-FX or 1000Base-X) or regular copper connections.

So, the check will not interfere with SFP support.

Regards,
Robert
>
>     Andrew

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ