[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ab894372-8212-4a29-8167-b872105db81c@ti.com>
Date: Mon, 12 Feb 2024 16:05:08 +0530
From: Bhavya Kapoor <b-kapoor@...com>
To: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 0/4] arm64: dts: ti: Modify pinmux for wkup_uart0 and
mcu_uart0
This should have been a v2, please ignore this . I will resend.
Thanks
On 12/02/24 3:29 pm, Bhavya Kapoor wrote:
> WKUP_PADCONFIG registers for wkup_uart0 and mcu_uart0 lies under
> wkup_pmx2 for J7200. Thus, modify pinmux for both of them. Also,
> remove the redundant clock-frequency property from mcu_uart0 node.
>
> Only Tx and Rx Signal lines for wkup_uart0 are brought out on
> J721S2 Common Proc Board and J784S4 EVM, but CTS and RTS signal lines
> are not brought out. Thus, remove pinmux for CTS and RTS signal lines
> for wkup_uart0 in J721S2 and J784S4.
>
> Bhavya Kapoor (4):
> arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for
> wkup_uart0 and mcu_uart0
> arm64: dts: ti: k3-j7200-common-proc-board: Remove clock-frequency
> from mcu_uart0
> arm64: dts: ti: k3-j721s2-common-proc-board: Remove Pinmux for CTS and
> RTS in wkup_uart0
> arm64: dts: ti: k3-j784s4-evm: Remove Pinmux for CTS and RTS in
> wkup_uart0
>
> .../boot/dts/ti/k3-j7200-common-proc-board.dts | 18 +++++++++---------
> .../dts/ti/k3-j721s2-common-proc-board.dts | 2 --
> arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 2 --
> 3 files changed, 9 insertions(+), 13 deletions(-)
>
Powered by blists - more mailing lists