[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <70caf0d0-28f5-48b9-b10e-5541488dd982@linaro.org>
Date: Mon, 12 Feb 2024 11:50:14 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Neil Armstrong <neil.armstrong@...aro.org>,
Rob Clark <robdclark@...il.com>, Abhinav Kumar <quic_abhinavk@...cinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>, Sean Paul <sean@...rly.run>,
Marijn Suijten <marijn.suijten@...ainline.org>,
David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Will Deacon <will@...nel.org>,
Robin Murphy <robin.murphy@....com>, Joerg Roedel <joro@...tes.org>,
Bjorn Andersson <andersson@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
iommu@...ts.linux.dev
Subject: Re: [PATCH 4/5] arm64: dts: qcom: sm8650: add GPU nodes
On 12.02.2024 11:37, Neil Armstrong wrote:
> Add GPU nodes for the SM8650 platform.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/sm8650.dtsi | 169 +++++++++++++++++++++++++++++++++++
> 1 file changed, 169 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
> index c455ca4e6475..f6f9e603fb2f 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
> @@ -2582,6 +2582,131 @@ tcsr: clock-controller@...0000 {
> #reset-cells = <1>;
> };
>
> + gpu: gpu@...0000 {
> + compatible = "qcom,adreno-43051401", "qcom,adreno";
> + reg = <0x0 0x03d00000 0x0 0x40000>,
> + <0x0 0x03d9e000 0x0 0x1000>,
> + <0x0 0x03d61000 0x0 0x800>;
> + reg-names = "kgsl_3d0_reg_memory",
> + "cx_mem",
> + "cx_dbgc";
> +
> + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
> +
> + iommus = <&adreno_smmu 0 0x0>,
> + <&adreno_smmu 1 0x0>;
> +
> + operating-points-v2 = <&gpu_opp_table>;
> +
> + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "gfx-mem";
ICC should be unnecessary
Konrad
Powered by blists - more mailing lists