lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Mon, 12 Feb 2024 11:47:38 +0000
From: Jonathan Cameron <Jonathan.Cameron@...wei.com>
To: Ondřej Jirman <megi@....cz>
CC: Jonathan Cameron <jic23@...nel.org>, Lars-Peter Clausen <lars@...afoo.de>,
	Rob Herring <robh+dt@...nel.org>, Krzysztof Kozlowski
	<krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>,
	Andrey Skvortsov <andrej.skvortzov@...il.com>, Icenowy Zheng
	<icenowy@...c.io>, <linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/4] dt-bindings: iio: magnetometer: Add DT binding for
 Voltafield AF8133J

On Sun, 11 Feb 2024 21:51:58 +0100
Ondřej Jirman <megi@....cz> wrote:

> From: Icenowy Zheng <icenowy@...c.io>

Title doesn't need to mention binding (it's implicit from the dt-bindings bit
dt-bindings: iio: magnetometer: Add Voltafield AF8133J

> 
> Voltafield AF8133J is a simple magnetometer sensor produced by Voltafield
> Technology Corp, with dual power supplies (one for core and one for I/O)
> and active-low reset pin.
> 
> The sensor has configurable range 1.2 - 2.2 mT and a software controlled
> standby mode.
> 
> Add a device tree binding for it.
> 
> Signed-off-by: Icenowy Zheng <icenowy@...c.io>
> Signed-off-by: Ondřej Jirman <megi@....cz>

Hi Ondřej

A few quick comments.


> ---
>  .../iio/magnetometer/voltafield,af8133j.yaml  | 58 +++++++++++++++++++
>  1 file changed, 58 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml b/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml
> new file mode 100644
> index 000000000000..ab56c0f798ad
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/magnetometer/voltafield,af8133j.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Voltafield AF8133J magnetometer sensor
> +
> +maintainers:
> +  - Ondřej Jirman <megi@....cz>
> +
> +properties:
> +  compatible:
> +    - voltafield,af8133j
Test your bindings (as described in the bot message).
    const: voltafield,af8133j

> +
> +  reg:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    description: |
No need for the | as the formatting doesn't need to be preserved.

> +      an pin needed for AF8133J to set the reset state. This should be usually

A pin

> +      active low.
> +
> +  avdd-supply:
> +    description: |
> +      an optional regulator that needs to be on to provide AVDD power (Working

An optional (if it were optional, A regulator if not)

> +      power, usually 3.3V) to the sensor.
Seems unlikely the power supply is optional (though specifying it in DT might be -
however see below).

> +
> +  dvdd-supply:
> +    description: |
> +      an optional regulator that needs to be on to provide DVDD power (Digital
> +      IO power, 1.8V~AVDD) to the sensor.
> +
> +  mount-matrix:
> +    description: an optional 3x3 mounting rotation matrix.
> +
> +required:
> +  - compatible
> +  - reg

Any power supply that is required for operation should be listed here (even though
we can rely on the stub supplies if it isn't in the DT).
I used to think this wasn't necessary, so lots of bindings upstream don't yet
have it.

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        magnetometer@1c {
> +            compatible = "voltafield,af8133j";
> +            reg = <0x1c>;
> +            avdd-supply = <&reg_dldo1>;
> +            dvdd-supply = <&reg_dldo1>;
> +            reset-gpios = <&pio 1 1 GPIO_ACTIVE_LOW>;
> +        };
> +    };


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ