[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240213163609.44930-4-sebastian.reichel@collabora.com>
Date: Tue, 13 Feb 2024 17:32:37 +0100
From: Sebastian Reichel <sebastian.reichel@...labora.com>
To: Heiko Stuebner <heiko@...ech.de>,
Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
linux-rockchip@...ts.infradead.org,
linux-phy@...ts.infradead.org
Cc: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Frank Wang <frank.wang@...k-chips.com>,
Kever Yang <kever.yang@...k-chips.com>,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Sebastian Reichel <sebastian.reichel@...labora.com>,
kernel@...labora.com
Subject: [PATCH v2 03/12] dt-bindings: phy: add rockchip usbdp combo phy document
Add device tree binding document for Rockchip USBDP Combo PHY
with Samsung IP block.
Co-developed-by: Frank Wang <frank.wang@...k-chips.com>
Signed-off-by: Frank Wang <frank.wang@...k-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@...labora.com>
---
.../bindings/phy/phy-rockchip-usbdp.yaml | 169 ++++++++++++++++++
1 file changed, 169 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
new file mode 100644
index 000000000000..4ac1825144d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-rockchip-usbdp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip USBDP Combo PHY with Samsung IP block
+
+maintainers:
+ - Frank Wang <frank.wang@...k-chips.com>
+ - Zhang Yubing <yubing.zhang@...k-chips.com>
+
+properties:
+ compatible:
+ enum:
+ - rockchip,rk3588-usbdp-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 4
+
+ clock-names:
+ items:
+ - const: refclk
+ - const: immortal
+ - const: pclk
+ - const: utmi
+
+ resets:
+ maxItems: 5
+
+ reset-names:
+ items:
+ - const: init
+ - const: cmn
+ - const: lane
+ - const: pcs_apb
+ - const: pma_apb
+
+ rockchip,dp-lane-mux:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 4
+ description:
+ An array of physical Type-C lanes indexes. Position of an entry
+ determines the DisplayPort (DP) lane index, while the value of an entry
+ indicates physical Type-C lane. The supported DP lanes number are 2 or 4.
+ e.g. for 2 lanes DP lanes map, we could have "rockchip,dp-lane-mux = <2,
+ 3>;", assuming DP lane0 on Type-C phy lane2, DP lane1 on Type-C phy
+ lane3. For 4 lanes DP lanes map, we could have "rockchip,dp-lane-mux =
+ <0, 1, 2, 3>;", assuming DP lane0 on Type-C phy lane0, DP lane1 on Type-C
+ phy lane1, DP lane2 on Type-C phy lane2, DP lane3 on Type-C phy lane3. If
+ DP lane map by DisplayPort Alt mode, this property is not need.
+
+ rockchip,u2phy-grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon managing the 'usb2 phy general register files'.
+
+ rockchip,usb-grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon managing the 'usb general register files'.
+
+ rockchip,usbdpphy-grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon managing the 'usbdp phy general register files'.
+
+ rockchip,vo-grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon managing the 'video output general register files'.
+ When select the DP lane mapping will request its phandle.
+
+ sbu1-dc-gpios:
+ description:
+ GPIO connected to the SBU1 line of the USB-C connector via a big resistor
+ (~100K) to apply a DC offset for signalling the connector orientation.
+ maxItems: 1
+
+ sbu2-dc-gpios:
+ description:
+ GPIO connected to the SBU2 line of the USB-C connector via a big resistor
+ (~100K) to apply a DC offset for signalling the connector orientation.
+ maxItems: 1
+
+ orientation-switch:
+ description: Flag the port as possible handler of orientation switching
+ type: boolean
+
+ mode-switch:
+ description: Flag the port as possible handler of altmode switching
+ type: boolean
+
+ dp-port:
+ type: object
+ additionalProperties: false
+
+ properties:
+ "#phy-cells":
+ const: 0
+
+ required:
+ - "#phy-cells"
+
+ usb3-port:
+ type: object
+ additionalProperties: false
+
+ properties:
+ "#phy-cells":
+ const: 0
+
+ required:
+ - "#phy-cells"
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ A port node to link the PHY to a TypeC controller for the purpose of
+ handling orientation switching.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - dp-port
+ - usb3-port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+ #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+
+ usbdp_phy0: phy@...80000 {
+ compatible = "rockchip,rk3588-usbdp-phy";
+ reg = <0xfed80000 0x10000>;
+ clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
+ <&cru CLK_USBDP_PHY0_IMMORTAL>,
+ <&cru PCLK_USBDPPHY0>,
+ <&u2phy0>;
+ clock-names = "refclk", "immortal", "pclk", "utmi";
+ resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>,
+ <&cru SRST_USBDP_COMBO_PHY0_CMN>,
+ <&cru SRST_USBDP_COMBO_PHY0_LANE>,
+ <&cru SRST_USBDP_COMBO_PHY0_PCS>,
+ <&cru SRST_P_USBDPPHY0>;
+ reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
+ rockchip,u2phy-grf = <&usb2phy0_grf>;
+ rockchip,usb-grf = <&usb_grf>;
+ rockchip,usbdpphy-grf = <&usbdpphy0_grf>;
+ rockchip,vo-grf = <&vo0_grf>;
+
+ usbdp_phy0_dp: dp-port {
+ #phy-cells = <0>;
+ };
+
+ usbdp_phy0_u3: usb3-port {
+ #phy-cells = <0>;
+ };
+ };
--
2.43.0
Powered by blists - more mailing lists