| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240213005248.1027842-1-nmorrisson@phytec.com>
Date: Mon, 12 Feb 2024 16:52:48 -0800
From: Nathan Morrisson <nmorrisson@...tec.com>
To: nm@...com,
vigneshr@...com,
kristo@...nel.org,
robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org
Cc: devicetree@...r.kernel.org,
upstream@...ts.phytec.de,
linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
w.egorov@...tec.de
Subject: [PATCH v3] arm64: dts: ti: am62-phyboard-lyra: Add overlay to enable a GPIO fan
The phyBOARD-Lyra has a GPIO fan header. This overlay enables the fan
header and sets the fan to turn on at 65C.
Signed-off-by: Nathan Morrisson <nmorrisson@...tec.com>
Reviewed-by: Wadim Egorov <w.egorov@...tec.de>
---
v3:
- Remove fan status okay
v2:
- Change overlay name from k3-am62-... to k3-am62x-...
- Add compile time test
arch/arm64/boot/dts/ti/Makefile | 3 ++
.../ti/k3-am62x-phyboard-lyra-gpio-fan.dtso | 50 +++++++++++++++++++
2 files changed, 53 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 52c1dc910308..bfeb496d5039 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-mallow.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62x-phyboard-lyra-gpio-fan.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
# Boards with AM62Ax SoC
@@ -87,6 +88,8 @@ k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \
k3-am625-beagleplay-csi2-ov5640.dtbo
k3-am625-beagleplay-csi2-tevi-ov5640-dtbs := k3-am625-beagleplay.dtb \
k3-am625-beagleplay-csi2-tevi-ov5640.dtbo
+k3-am625-phyboard-lyra-gpio-fan-dtbs := k3-am625-phyboard-lyra-rdk.dtb \
+ k3-am62x-phyboard-lyra-gpio-fan.dtbo
k3-am625-sk-csi2-imx219-dtbs := k3-am625-sk.dtb \
k3-am62x-sk-csi2-imx219.dtbo
k3-am625-sk-csi2-ov5640-dtbs := k3-am625-sk.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
new file mode 100644
index 000000000000..f0b2fd4165a7
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2024 PHYTEC America LLC
+ * Author: Garrett Giordano <ggiordano@...tec.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+ fan: gpio-fan {
+ compatible = "gpio-fan";
+ gpio-fan,speed-map = <0 0 8600 1>;
+ gpios = <&main_gpio0 40 GPIO_ACTIVE_LOW>;
+ #cooling-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_fan_pins_default>;
+ };
+};
+
+&main_pmx0 {
+ gpio_fan_pins_default: gpio-fan-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0a4, PIN_OUTPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */
+ >;
+ };
+};
+
+&thermal_zones {
+ main0_thermal: main0-thermal {
+ trips {
+ main0_thermal_trip0: main0-thermal-trip {
+ temperature = <65000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&main0_thermal_trip0>;
+ cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+};
--
2.25.1
Powered by blists - more mailing lists