[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240213005422.3121-3-quic_wcheng@quicinc.com>
Date: Mon, 12 Feb 2024 16:53:34 -0800
From: Wesley Cheng <quic_wcheng@...cinc.com>
To: <srinivas.kandagatla@...aro.org>, <mathias.nyman@...el.com>,
<perex@...ex.cz>, <conor+dt@...nel.org>, <corbet@....net>,
<lgirdwood@...il.com>, <andersson@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <gregkh@...uxfoundation.org>,
<Thinh.Nguyen@...opsys.com>, <broonie@...nel.org>,
<bgoswami@...cinc.com>, <tiwai@...e.com>, <robh+dt@...nel.org>,
<konrad.dybcio@...aro.org>
CC: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-sound@...r.kernel.org>, <linux-usb@...r.kernel.org>,
<linux-arm-msm@...r.kernel.org>, <linux-doc@...r.kernel.org>,
<alsa-devel@...a-project.org>,
Mathias Nyman <mathias.nyman@...ux.intel.com>,
Wesley Cheng <quic_wcheng@...cinc.com>
Subject: [PATCH v15 02/50] xhci: Add helper to set an interrupters interrupt moderation interval
From: Mathias Nyman <mathias.nyman@...ux.intel.com>
Add a helper to set the interrupt moderation interval for an interrupter.
Each interrupter can have its own moderation value.
Hardware has a 16bit register for the moderation value, each step is 250ns.
Helper function imod_interval argument is in nanoseconds.
Values from 0 to 16383750 (250 x 0xffff) are accepted.
0 means no interrupt throttling.
Signed-off-by: Mathias Nyman <mathias.nyman@...ux.intel.com>
Signed-off-by: Wesley Cheng <quic_wcheng@...cinc.com>
---
drivers/usb/host/xhci.c | 25 ++++++++++++++++++-------
1 file changed, 18 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 0886829d53e5..b405b8236134 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -346,6 +346,23 @@ static int xhci_disable_interrupter(struct xhci_interrupter *ir)
return 0;
}
+/* interrupt moderation interval imod_interval in nanoseconds */
+static int xhci_set_interrupter_moderation(struct xhci_interrupter *ir,
+ u32 imod_interval)
+{
+ u32 imod;
+
+ if (!ir || !ir->ir_set || imod_interval > U16_MAX * 250)
+ return -EINVAL;
+
+ imod = readl(&ir->ir_set->irq_control);
+ imod &= ~ER_IRQ_INTERVAL_MASK;
+ imod |= (imod_interval / 250) & ER_IRQ_INTERVAL_MASK;
+ writel(imod, &ir->ir_set->irq_control);
+
+ return 0;
+}
+
static void compliance_mode_recovery(struct timer_list *t)
{
struct xhci_hcd *xhci;
@@ -528,7 +545,6 @@ static int xhci_run_finished(struct xhci_hcd *xhci)
*/
int xhci_run(struct usb_hcd *hcd)
{
- u32 temp;
u64 temp_64;
int ret;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
@@ -551,12 +567,7 @@ int xhci_run(struct usb_hcd *hcd)
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"ERST deq = 64'h%0lx", (long unsigned int) temp_64);
- xhci_dbg_trace(xhci, trace_xhci_dbg_init,
- "// Set the interrupt modulation register");
- temp = readl(&ir->ir_set->irq_control);
- temp &= ~ER_IRQ_INTERVAL_MASK;
- temp |= (xhci->imod_interval / 250) & ER_IRQ_INTERVAL_MASK;
- writel(temp, &ir->ir_set->irq_control);
+ xhci_set_interrupter_moderation(ir, xhci->imod_interval);
if (xhci->quirks & XHCI_NEC_HOST) {
struct xhci_command *command;
Powered by blists - more mailing lists