lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240213082724.1789096-3-quic_kriskura@quicinc.com>
Date: Tue, 13 Feb 2024 13:57:24 +0530
From: Krishna Kurapati <quic_kriskura@...cinc.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring
	<robh+dt@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio
	<konrad.dybcio@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>
CC: <devicetree@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <quic_ppratap@...cinc.com>,
        <quic_jackp@...cinc.com>, Krishna Kurapati <quic_kriskura@...cinc.com>
Subject: [PATCH v2 2/2] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports

Multiport USB controller (host-only) of SA8295 ADP has 4 Type-A ports
exposed for connecting peripherals. The VBUS to these peripherals is
provided by TPS2559QWDRCTQ1 regulators connected to these ports. Each
regulator has an enable pin controlled by PMM8540. Since these regulators
are GPIO controlled regulators, model them as fixed regulators and keep
them Always-On at boot since we are wakeup capable and we don't need to
turn them off on suspend. Also since we don't enter device mode, these
regulators can be kept on.

Signed-off-by: Krishna Kurapati <quic_kriskura@...cinc.com>
---
 arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 83 ++++++++++++++++++++++++
 1 file changed, 83 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index fd253942e5e5..49418843c214 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -9,6 +9,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 #include "sa8540p.dtsi"
 #include "sa8540p-pmics.dtsi"
@@ -108,6 +109,46 @@ edp3_connector_in: endpoint {
 			};
 		};
 	};
+
+	regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB2_VBUS";
+		gpio = <&pmm8540c_gpios 9 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb2_en>;
+		pinctrl-names = "default";
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB3_VBUS";
+		gpio = <&pmm8540e_gpios 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb3_en>;
+		pinctrl-names = "default";
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-usb4-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB4_VBUS";
+		gpio = <&pmm8540g_gpios 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb4_en>;
+		pinctrl-names = "default";
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-usb5-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB5_VBUS";
+		gpio = <&pmm8540g_gpios 9 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb5_en>;
+		pinctrl-names = "default";
+		enable-active-high;
+		regulator-always-on;
+	};
 };
 
 &apps_rsc {
@@ -584,6 +625,10 @@ &usb_1_qmpphy {
 	status = "okay";
 };
 
+&usb_2 {
+	status = "okay";
+};
+
 &usb_2_hsphy0 {
 	vdda-pll-supply = <&vreg_l5a>;
 	vdda18-supply = <&vreg_l7g>;
@@ -636,6 +681,44 @@ &xo_board_clk {
 
 /* PINCTRL */
 
+&pmm8540c_gpios {
+	usb2_en: usb2-en-state {
+		pins = "gpio9";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+		output-enable;
+		power-source = <0>;
+	};
+};
+
+&pmm8540e_gpios {
+	usb3_en: usb3-en-state {
+		pins = "gpio5";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+		output-enable;
+		power-source = <0>;
+	};
+};
+
+&pmm8540g_gpios {
+	usb4_en: usb4-en-state {
+		pins = "gpio5";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+		output-enable;
+		power-source = <0>;
+	};
+
+	usb5_en: usb5-en-state {
+		pins = "gpio9";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+		output-enable;
+		power-source = <0>;
+	};
+};
+
 &tlmm {
 	pcie2a_default: pcie2a-default-state {
 		clkreq-n-pins {
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ