[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0d8d8b85-1208-4021-b1f8-1c1c593ddbfe@phytec.de>
Date: Tue, 13 Feb 2024 10:05:46 +0100
From: Wadim Egorov <w.egorov@...tec.de>
To: Francesco Dolcini <francesco@...cini.it>
CC: Judith Mendez <jm@...com>, Rob Herring <robh+dt@...nel.org>, Krzysztof
Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley
<conor+dt@...nel.org>, Nishanth Menon <nm@...com>, Vignesh Raghavendra
<vigneshr@...com>, Tero Kristo <kristo@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Francesco Dolcini
<francesco.dolcini@...adex.com>
Subject: Re: [PATCH v2 8/9] arm64: dts: ti: k3-am6*: Fix bus-width property in
MMC nodes
Am 13.02.24 um 09:19 schrieb Francesco Dolcini:
> On Tue, Feb 13, 2024 at 06:07:28AM +0100, Wadim Egorov wrote:
>> Hi Judith,
>>
>> Am 13.02.24 um 01:24 schrieb Judith Mendez:
>>> Move bus-width property to *main.dtsi, above the OTAP/ITAP
>>> delay values. While there is no error with where it is
>>> currently at, it is easier to read the MMC node if the
>>> bus-width property is located above the OTAP/ITAP delay
>>> values consistently across MMC nodes.
>>>
>>> Add missing bus-width for MMC2 in k3-am62-main.
>>>
>>> Signed-off-by: Judith Mendez <jm@...com>
>>> ---
>>> arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 5 +++--
>>> arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 1 -
>>> arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 2 +-
>>> arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 2 ++
>>> arch/arm64/boot/dts/ti/k3-am642-evm.dts | 2 --
>>> arch/arm64/boot/dts/ti/k3-am642-sk.dts | 1 -
>> I think you missed to update all non TI boards.
> Not sure which boards are you referring to.
>
> I would not change the verdin-am62 boards, the bus-width there is
> consistent with the schematics, it's just correct and in the right place
> IMO.
Ah, yes. Agree.
>
> Francesco
>
Powered by blists - more mailing lists