| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZctGs2d9ccnmYysL@lpieralisi>
Date: Tue, 13 Feb 2024 11:38:43 +0100
From: Lorenzo Pieralisi <lpieralisi@...nel.org>
To: Frank Li <Frank.Li@....com>
Cc: manivannan.sadhasivam@...aro.org, bhelgaas@...gle.com,
conor+dt@...nel.org, devicetree@...r.kernel.org, festevam@...il.com,
helgaas@...nel.org, hongxing.zhu@....com, imx@...ts.linux.dev,
kernel@...gutronix.de, krzysztof.kozlowski+dt@...aro.org,
krzysztof.kozlowski@...aro.org, kw@...ux.com,
l.stach@...gutronix.de, linux-arm-kernel@...ts.infradead.org,
linux-imx@....com, linux-kernel@...r.kernel.org,
linux-pci@...r.kernel.org, robh@...nel.org, s.hauer@...gutronix.de,
shawnguo@...nel.org, hch@....de, robin.murphy@....com
Subject: Re: [PATCH v9 16/16] PCI: imx6: Add iMX95 Endpoint (EP) support
[+Christoph, Robin - just checking with you if the DMA mask handling is
what you expect from drivers, don't want to merge code that breaks your
expectations]
On Fri, Jan 19, 2024 at 12:11:22PM -0500, Frank Li wrote:
> Add iMX95 EP support and add 64bit address support. Internal bus bridge for
> PCI support 64bit dma address in iMX95. Hence, call
> dma_set_mask_and_coherent() to set 64 bit DMA mask.
>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> Signed-off-by: Frank Li <Frank.Li@....com>
> ---
>
> Notes:
> Change from v8 to v9
> - update fixme comments
> - update BAR1 comments
> - Add mani's review tag
> Change from v7 to v8
> - Update commit message
> - Using Fixme
> - Update clks_cnts by ARRAY_SIZE
>
> Change from v4 to v7
> - none
> Change from v3 to v4
> - change align to 4k for imx95
> Change from v1 to v3
> - new patches at v3
>
> drivers/pci/controller/dwc/pci-imx6.c | 47 +++++++++++++++++++++++++++
> 1 file changed, 47 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index bbaa45c08323b..7889318f6555a 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -75,6 +75,7 @@ enum imx6_pcie_variants {
> IMX8MQ_EP,
> IMX8MM_EP,
> IMX8MP_EP,
> + IMX95_EP,
> };
>
> #define IMX6_PCIE_FLAG_IMX6_PHY BIT(0)
> @@ -84,6 +85,7 @@ enum imx6_pcie_variants {
> #define IMX6_PCIE_FLAG_HAS_APP_RESET BIT(4)
> #define IMX6_PCIE_FLAG_HAS_PHY_RESET BIT(5)
> #define IMX6_PCIE_FLAG_HAS_SERDES BIT(6)
> +#define IMX6_PCIE_FLAG_SUPPORT_64BIT BIT(7)
>
> #define imx6_check_flag(pci, val) (pci->drvdata->flags & val)
>
> @@ -616,6 +618,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
> break;
> case IMX7D:
> case IMX95:
> + case IMX95_EP:
> break;
> case IMX8MM:
> case IMX8MM_EP:
> @@ -1050,6 +1053,23 @@ static const struct pci_epc_features imx8m_pcie_epc_features = {
> .align = SZ_64K,
> };
>
> +/*
> + * BAR# | Default BAR enable | Default BAR Type | Default BAR Size | BAR Sizing Scheme
> + * ================================================================================================
> + * BAR0 | Enable | 64-bit | 1 MB | Programmable Size
> + * BAR1 | Disable | 32-bit | 64 KB | Fixed Size
> + * BAR1 should be disabled if BAR0 is 64bit.
> + * BAR2 | Enable | 32-bit | 1 MB | Programmable Size
> + * BAR3 | Enable | 32-bit | 64 KB | Programmable Size
> + * BAR4 | Enable | 32-bit | 1M | Programmable Size
> + * BAR5 | Enable | 32-bit | 64 KB | Programmable Size
> + */
> +static const struct pci_epc_features imx95_pcie_epc_features = {
> + .msi_capable = true,
> + .bar_fixed_size[1] = SZ_64K,
> + .align = SZ_4K,
> +};
> +
> static const struct pci_epc_features*
> imx6_pcie_ep_get_features(struct dw_pcie_ep *ep)
> {
> @@ -1092,6 +1112,15 @@ static int imx6_add_pcie_ep(struct imx6_pcie *imx6_pcie,
>
> pci->dbi_base2 = pci->dbi_base + pcie_dbi2_offset;
>
> + /*
> + * FIXME: Ideally, dbi2 base address should come from DT. But since only IMX95 is defining
> + * "dbi2" in DT, "dbi_base2" is set to NULL here for that platform alone so that the DWC
> + * core code can fetch that from DT. But once all platform DTs were fixed, this and the
> + * above "dbi_base2" setting should be removed.
> + */
> + if (imx6_pcie->drvdata->variant == IMX95_EP)
> + pci->dbi_base2 = NULL;
> +
> ret = dw_pcie_ep_init(ep);
> if (ret) {
> dev_err(dev, "failed to initialize endpoint\n");
> @@ -1345,6 +1374,9 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> "unable to find iomuxc registers\n");
> }
>
> + if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_SUPPORT_64BIT))
> + dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
> +
> /* Grab PCIe PHY Tx Settings */
> if (of_property_read_u32(node, "fsl,tx-deemph-gen1",
> &imx6_pcie->tx_deemph_gen1))
> @@ -1563,6 +1595,20 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> .epc_features = &imx8m_pcie_epc_features,
> },
> + [IMX95_EP] = {
> + .variant = IMX95_EP,
> + .flags = IMX6_PCIE_FLAG_HAS_SERDES |
> + IMX6_PCIE_FLAG_SUPPORT_64BIT,
> + .clk_names = imx8mq_clks,
> + .clks_cnt = ARRAY_SIZE(imx8mq_clks),
> + .ltssm_off = IMX95_PE0_GEN_CTRL_3,
> + .ltssm_mask = IMX95_PCIE_LTSSM_EN,
> + .mode_off[0] = IMX95_PE0_GEN_CTRL_1,
> + .mode_mask[0] = IMX95_PCIE_DEVICE_TYPE,
> + .init_phy = imx95_pcie_init_phy,
> + .epc_features = &imx95_pcie_epc_features,
> + .mode = DW_PCIE_EP_TYPE,
> + },
> };
>
> static const struct of_device_id imx6_pcie_of_match[] = {
> @@ -1577,6 +1623,7 @@ static const struct of_device_id imx6_pcie_of_match[] = {
> { .compatible = "fsl,imx8mq-pcie-ep", .data = &drvdata[IMX8MQ_EP], },
> { .compatible = "fsl,imx8mm-pcie-ep", .data = &drvdata[IMX8MM_EP], },
> { .compatible = "fsl,imx8mp-pcie-ep", .data = &drvdata[IMX8MP_EP], },
> + { .compatible = "fsl,imx95-pcie-ep", .data = &drvdata[IMX95_EP], },
> {},
> };
>
> --
> 2.34.1
>
Powered by blists - more mailing lists