| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240213110137.122737-2-i@rong.moe>
Date: Tue, 13 Feb 2024 18:58:36 +0800
From: Rong Zhang <i@...g.moe>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Rong Zhang <i@...g.moe>,
linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Icenowy Zheng <uwu@...nowy.me>
Subject: [PATCH v3 1/4] ARM: dts: qcom: msm8974: Split out common part of samsung-klte
Samsung Galaxy S5 has many variants. Variants that support LTE use klte*
as their codename. Currently, the only supported one is the one without
any suffix, namely, klte. It is known that other klte* variants have
only minor differences compared to klte and can mostly work with the
klte DTB.
Split the common part into a common DTSI so that it can be imported in
the DTS of klte and other klte* variants.
Signed-off-by: Rong Zhang <i@...g.moe>
---
... qcom-msm8974pro-samsung-klte-common.dtsi} | 7 +-
.../dts/qcom/qcom-msm8974pro-samsung-klte.dts | 833 +-----------------
2 files changed, 17 insertions(+), 823 deletions(-)
copy arch/arm/boot/dts/qcom/{qcom-msm8974pro-samsung-klte.dts => qcom-msm8974pro-samsung-klte-common.dtsi} (98%)
rewrite arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts (99%)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi
similarity index 98%
copy from arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
copy to arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi
index b93539e2b87e..11e35b34ebd6 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi
@@ -6,8 +6,6 @@
#include <dt-bindings/leds/common.h>
/ {
- model = "Samsung Galaxy S5";
- compatible = "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";
chassis-type = "handset";
aliases {
@@ -77,12 +75,10 @@ touchkey@20 {
};
};
- i2c-gpio-led {
+ i2c_led_gpio: i2c-gpio-led {
compatible = "i2c-gpio";
#address-cells = <1>;
#size-cells = <0>;
- scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
pinctrl-names = "default";
pinctrl-0 = <&i2c_led_gpioex_pins>;
@@ -770,7 +766,6 @@ i2c_touchkey_pins: i2c-touchkey-state {
};
i2c_led_gpioex_pins: i2c-led-gpioex-state {
- pins = "gpio120", "gpio121";
function = "gpio";
bias-pull-down;
};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
dissimilarity index 99%
index b93539e2b87e..954665f3a9dd 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
@@ -1,817 +1,16 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974pro.dtsi"
-#include "pma8084.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "Samsung Galaxy S5";
- compatible = "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";
- chassis-type = "handset";
-
- aliases {
- serial0 = &blsp1_uart1;
- mmc0 = &sdhc_1; /* SDC1 eMMC slot */
- mmc1 = &sdhc_3; /* SDC2 SD card slot */
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_pin_a>;
-
- key-volume-down {
- label = "volume_down";
- gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEDOWN>;
- debounce-interval = <15>;
- };
-
- key-home {
- label = "home_key";
- gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_HOMEPAGE>;
- wakeup-source;
- debounce-interval = <15>;
- };
-
- key-volume-up {
- label = "volume_up";
- gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEUP>;
- debounce-interval = <15>;
- };
- };
-
- i2c-gpio-touchkey {
- compatible = "i2c-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_touchkey_pins>;
-
- touchkey@20 {
- compatible = "cypress,tm2-touchkey";
- reg = <0x20>;
-
- interrupt-parent = <&pma8084_gpios>;
- interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&touchkey_pin>;
-
- vcc-supply = <&max77826_ldo15>;
- vdd-supply = <&pma8084_l19>;
-
- linux,keycodes = <KEY_APPSELECT KEY_BACK>;
- };
- };
-
- i2c-gpio-led {
- compatible = "i2c-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_led_gpioex_pins>;
-
- i2c-gpio,delay-us = <2>;
-
- gpio_expander: gpio@20 {
- compatible = "nxp,pcal6416";
- reg = <0x20>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- vcc-supply = <&pma8084_s4>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&gpioex_pin>;
-
- reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
- };
-
- led-controller@30 {
- compatible = "panasonic,an30259a";
- reg = <0x30>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@1 {
- reg = <1>;
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_RED>;
- };
-
- led@2 {
- reg = <2>;
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led@3 {
- reg = <3>;
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_BLUE>;
- };
- };
- };
-
- vreg_wlan: wlan-regulator {
- compatible = "regulator-fixed";
-
- regulator-name = "wl-reg";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vreg_panel: panel-regulator {
- compatible = "regulator-fixed";
-
- pinctrl-names = "default";
- pinctrl-0 = <&panel_en_pin>;
-
- regulator-name = "panel-vddr-reg";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
-
- gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vreg_vph_pwr: vreg-vph-pwr {
- compatible = "regulator-fixed";
- regulator-name = "vph-pwr";
-
- regulator-min-microvolt = <3600000>;
- regulator-max-microvolt = <3600000>;
-
- regulator-always-on;
- };
-};
-
-&blsp1_i2c2 {
- status = "okay";
-
- touchscreen@20 {
- compatible = "syna,rmi4-i2c";
- reg = <0x20>;
-
- interrupt-parent = <&pma8084_gpios>;
- interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
- vdd-supply = <&max77826_ldo13>;
- vio-supply = <&pma8084_lvs2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&touch_pin>;
-
- syna,startup-delay-ms = <100>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- rmi4-f01@1 {
- reg = <0x1>;
- syna,nosleep-mode = <1>;
- };
-
- rmi4-f12@12 {
- reg = <0x12>;
- syna,sensor-type = <1>;
- };
- };
-};
-
-&blsp1_i2c6 {
- status = "okay";
-
- pmic@60 {
- reg = <0x60>;
- compatible = "maxim,max77826";
-
- regulators {
- max77826_ldo1: LDO1 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- max77826_ldo2: LDO2 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- max77826_ldo3: LDO3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- max77826_ldo4: LDO4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_ldo5: LDO5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_ldo6: LDO6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo7: LDO7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_ldo8: LDO8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo9: LDO9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_ldo10: LDO10 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- max77826_ldo11: LDO11 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2950000>;
- };
-
- max77826_ldo12: LDO12 {
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo13: LDO13 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo14: LDO14 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo15: LDO15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_buck: BUCK {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- max77826_buckboost: BUCKBOOST {
- regulator-min-microvolt = <3400000>;
- regulator-max-microvolt = <3400000>;
- };
- };
- };
-};
-
-&blsp1_uart2 {
- status = "okay";
-};
-
-&blsp2_i2c6 {
- status = "okay";
-
- fuelgauge@36 {
- compatible = "maxim,max17048";
- reg = <0x36>;
-
- maxim,double-soc;
- maxim,rcomp = /bits/ 8 <0x56>;
-
- interrupt-parent = <&pma8084_gpios>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&fuelgauge_pin>;
- };
-};
-
-&blsp2_uart2 {
- status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart2_pins_active>;
- pinctrl-1 = <&blsp2_uart2_pins_sleep>;
-
- bluetooth {
- compatible = "brcm,bcm43540-bt";
- max-speed = <3000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_pins>;
- device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
- interrupt-parent = <&tlmm>;
- interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wakeup";
- };
-};
-
-&gpu {
- status = "okay";
-};
-
-&mdss {
- status = "okay";
-};
-
-&mdss_dsi0 {
- status = "okay";
-
- vdda-supply = <&pma8084_l2>;
- vdd-supply = <&pma8084_l22>;
- vddio-supply = <&pma8084_l12>;
-
- panel: panel@0 {
- reg = <0>;
- compatible = "samsung,s6e3fa2";
-
- pinctrl-names = "default";
- pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
-
- iovdd-supply = <&pma8084_lvs4>;
- vddr-supply = <&vreg_panel>;
-
- reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&mdss_dsi0_out>;
- };
- };
- };
-};
-
-&mdss_dsi0_out {
- remote-endpoint = <&panel_in>;
- data-lanes = <0 1 2 3>;
-};
-
-&mdss_dsi0_phy {
- status = "okay";
-
- vddio-supply = <&pma8084_l12>;
-};
-
-&pma8084_gpios {
- gpio_keys_pin_a: gpio-keys-active-state {
- pins = "gpio2", "gpio3", "gpio5";
- function = "normal";
-
- bias-pull-up;
- power-source = <PMA8084_GPIO_S4>;
- };
-
- touchkey_pin: touchkey-int-state {
- pins = "gpio6";
- function = "normal";
- bias-disable;
- input-enable;
- power-source = <PMA8084_GPIO_S4>;
- };
-
- touch_pin: touchscreen-int-state {
- pins = "gpio8";
- function = "normal";
- bias-disable;
- input-enable;
- power-source = <PMA8084_GPIO_S4>;
- };
-
- panel_en_pin: panel-en-state {
- pins = "gpio14";
- function = "normal";
- bias-pull-up;
- power-source = <PMA8084_GPIO_S4>;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- };
-
- wlan_sleep_clk_pin: wlan-sleep-clk-state {
- pins = "gpio16";
- function = "func2";
-
- output-high;
- power-source = <PMA8084_GPIO_S4>;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
- };
-
- panel_rst_pin: panel-rst-state {
- pins = "gpio17";
- function = "normal";
- bias-disable;
- power-source = <PMA8084_GPIO_S4>;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- };
-
- fuelgauge_pin: fuelgauge-int-state {
- pins = "gpio21";
- function = "normal";
- bias-disable;
- input-enable;
- power-source = <PMA8084_GPIO_S4>;
- };
-};
-
-&remoteproc_adsp {
- status = "okay";
- cx-supply = <&pma8084_s2>;
-};
-
-&remoteproc_mss {
- status = "okay";
- cx-supply = <&pma8084_s2>;
- mss-supply = <&pma8084_s6>;
- mx-supply = <&pma8084_s1>;
- pll-supply = <&pma8084_l12>;
-};
-
-&rpm_requests {
- regulators-0 {
- compatible = "qcom,rpm-pma8084-regulators";
-
- pma8084_s1: s1 {
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <1050000>;
- regulator-always-on;
- };
-
- pma8084_s2: s2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- pma8084_s3: s3 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- };
-
- pma8084_s4: s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_s5: s5 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- };
-
- pma8084_s6: s6 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- };
-
- pma8084_l1: l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- pma8084_l2: l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pma8084_l3: l3 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pma8084_l4: l4 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1225000>;
- };
-
- pma8084_l5: l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l6: l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l7: l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l8: l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l9: l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- pma8084_l10: l10 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- pma8084_l11: l11 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- };
-
- pma8084_l12: l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- pma8084_l13: l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- pma8084_l14: l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l15: l15 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- pma8084_l16: l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- pma8084_l17: l17 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- pma8084_l18: l18 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- pma8084_l19: l19 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- pma8084_l20: l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-system-load = <200000>;
- regulator-allow-set-load;
- };
-
- pma8084_l21: l21 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-system-load = <200000>;
- regulator-allow-set-load;
- };
-
- pma8084_l22: l22 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- };
-
- pma8084_l23: l23 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- pma8084_l24: l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
- };
-
- pma8084_l25: l25 {
- regulator-min-microvolt = <2100000>;
- regulator-max-microvolt = <2100000>;
- };
-
- pma8084_l26: l26 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2050000>;
- };
-
- pma8084_l27: l27 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1225000>;
- };
-
- pma8084_lvs1: lvs1 {};
- pma8084_lvs2: lvs2 {};
- pma8084_lvs3: lvs3 {};
- pma8084_lvs4: lvs4 {};
-
- pma8084_5vs1: 5vs1 {};
- };
-};
-
-&sdhc_1 {
- status = "okay";
-
- vmmc-supply = <&pma8084_l20>;
- vqmmc-supply = <&pma8084_s4>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_on>;
- pinctrl-1 = <&sdc1_off>;
-};
-
-&sdhc_2 {
- status = "okay";
- max-frequency = <100000000>;
- vmmc-supply = <&vreg_wlan>;
- vqmmc-supply = <&pma8084_s4>;
- non-removable;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_on>;
- pinctrl-1 = <&sdc2_off>;
-
- wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
-
- interrupt-parent = <&tlmm>;
- interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
-
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
- };
-};
-
-&sdhc_3 {
- status = "okay";
- max-frequency = <100000000>;
- vmmc-supply = <&pma8084_l21>;
- vqmmc-supply = <&pma8084_l13>;
-
- /*
- * cd-gpio is intentionally disabled. If enabled, an SD card
- * present during boot is not initialized correctly. Without
- * cd-gpios the driver resorts to polling, so hotplug works.
- */
- pinctrl-names = "default";
- pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>;
- /* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
-};
-
-&tlmm {
- /* This seems suspicious, but somebody with this device should look into it. */
- blsp2_uart2_pins_active: blsp2-uart2-pins-active-state {
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- function = "blsp_uart8";
- drive-strength = <8>;
- bias-disable;
- };
-
- blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state {
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- bt_pins: bt-pins-state {
- hostwake-pins {
- pins = "gpio75";
- function = "gpio";
- drive-strength = <16>;
- };
-
- devwake-pins {
- pins = "gpio91";
- function = "gpio";
- drive-strength = <2>;
- };
- };
-
- sdc1_on: sdhc1-on-state {
- clk-pins {
- pins = "sdc1_clk";
- drive-strength = <4>;
- bias-disable;
- };
-
- cmd-data-pins {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <4>;
- bias-pull-up;
- };
- };
-
- sdc3_on: sdc3-on-state {
- pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
- function = "sdc3";
- drive-strength = <8>;
- bias-disable;
- };
-
- sdhc3_cd_pin: sdc3-cd-on-state {
- pins = "gpio62";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- sdc2_on: sdhc2-on-state {
- clk-pins {
- pins = "sdc2_clk";
- drive-strength = <6>;
- bias-disable;
- };
-
- cmd-data-pins {
- pins = "sdc2_cmd", "sdc2_data";
- drive-strength = <6>;
- bias-pull-up;
- };
- };
-
- i2c_touchkey_pins: i2c-touchkey-state {
- pins = "gpio95", "gpio96";
- function = "gpio";
- bias-pull-up;
- };
-
- i2c_led_gpioex_pins: i2c-led-gpioex-state {
- pins = "gpio120", "gpio121";
- function = "gpio";
- bias-pull-down;
- };
-
- gpioex_pin: gpioex-state {
- pins = "gpio145";
- function = "gpio";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- wifi_pin: wifi-state {
- pins = "gpio92";
- function = "gpio";
- bias-pull-down;
- };
-
- panel_te_pin: panel-state {
- pins = "gpio12";
- function = "mdp_vsync";
- drive-strength = <2>;
- bias-disable;
- };
-};
-
-&usb {
- status = "okay";
-
- phys = <&usb_hs1_phy>;
- phy-select = <&tcsr 0xb000 0>;
-
- hnp-disable;
- srp-disable;
- adp-disable;
-};
-
-&usb_hs1_phy {
- status = "okay";
-
- v1p8-supply = <&pma8084_l6>;
- v3p3-supply = <&pma8084_l24>;
-
- qcom,init-seq = /bits/ 8 <0x1 0x64>;
-};
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro-samsung-klte-common.dtsi"
+
+/ {
+ model = "Samsung Galaxy S5";
+ compatible = "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";
+};
+
+&i2c_led_gpio {
+ scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c_led_gpioex_pins {
+ pins = "gpio120", "gpio121";
+};
--
2.43.0
Powered by blists - more mailing lists