| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240213124143.1484862-14-ardb+git@google.com>
Date: Tue, 13 Feb 2024 13:41:45 +0100
From: Ard Biesheuvel <ardb+git@...gle.com>
To: linux-kernel@...r.kernel.org
Cc: Ard Biesheuvel <ardb@...nel.org>, Kevin Loughlin <kevinloughlin@...gle.com>,
Tom Lendacky <thomas.lendacky@....com>, Dionna Glaze <dionnaglaze@...gle.com>,
Thomas Gleixner <tglx@...utronix.de>, Ingo Molnar <mingo@...hat.com>, Borislav Petkov <bp@...en8.de>,
Dave Hansen <dave.hansen@...ux.intel.com>, Andy Lutomirski <luto@...nel.org>,
Arnd Bergmann <arnd@...db.de>, Nathan Chancellor <nathan@...nel.org>,
Nick Desaulniers <ndesaulniers@...gle.com>, Justin Stitt <justinstitt@...gle.com>,
Kees Cook <keescook@...omium.org>, Brian Gerst <brgerst@...il.com>, linux-arch@...r.kernel.org,
llvm@...ts.linux.dev
Subject: [PATCH v4 01/11] x86/startup_64: Simplify global variable accesses in
GDT/IDT programming
From: Ard Biesheuvel <ardb@...nel.org>
There are two code paths in the startup code to program an IDT: one that
runs from the 1:1 mapping and one that runs from the virtual kernel
mapping. Currently, these are strictly separate because fixup_pointer()
is used on the 1:1 path, which will produce the wrong value when used
while executing from the virtual kernel mapping.
Switch to RIP_REL_REF() so that the two code paths can be merged. Also,
move the GDT and IDT descriptors to the stack so that they can be
referenced directly, rather than via RIP_REL_REF().
Rename startup_64_setup_env() to startup_64_setup_gdt_idt() while at it,
to make the call from assembler self-documenting.
Signed-off-by: Ard Biesheuvel <ardb@...nel.org>
---
arch/x86/include/asm/setup.h | 2 +-
arch/x86/kernel/head64.c | 56 +++++++-------------
arch/x86/kernel/head_64.S | 4 +-
3 files changed, 22 insertions(+), 40 deletions(-)
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 5c83729c8e71..e61e68d71cba 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -48,7 +48,7 @@ extern unsigned long saved_video_mode;
extern void reserve_standard_io_resources(void);
extern void i386_reserve_resources(void);
extern unsigned long __startup_64(unsigned long physaddr, struct boot_params *bp);
-extern void startup_64_setup_env(unsigned long physbase);
+extern void startup_64_setup_gdt_idt(void);
extern void early_setup_idt(void);
extern void __init do_early_exception(struct pt_regs *regs, int trapnr);
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index dc0956067944..9d7f12829f2d 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -22,6 +22,7 @@
#include <linux/cc_platform.h>
#include <linux/pgtable.h>
+#include <asm/asm.h>
#include <asm/processor.h>
#include <asm/proto.h>
#include <asm/smp.h>
@@ -76,15 +77,6 @@ static struct desc_struct startup_gdt[GDT_ENTRIES] __initdata = {
[GDT_ENTRY_KERNEL_DS] = GDT_ENTRY_INIT(DESC_DATA64, 0, 0xfffff),
};
-/*
- * Address needs to be set at runtime because it references the startup_gdt
- * while the kernel still uses a direct mapping.
- */
-static struct desc_ptr startup_gdt_descr __initdata = {
- .size = sizeof(startup_gdt)-1,
- .address = 0,
-};
-
static void __head *fixup_pointer(void *ptr, unsigned long physaddr)
{
return ptr - (void *)_text + (void *)physaddr;
@@ -569,12 +561,7 @@ void __init __noreturn x86_64_start_reservations(char *real_mode_data)
*/
static gate_desc bringup_idt_table[NUM_EXCEPTION_VECTORS] __page_aligned_data;
-static struct desc_ptr bringup_idt_descr = {
- .size = (NUM_EXCEPTION_VECTORS * sizeof(gate_desc)) - 1,
- .address = 0, /* Set at runtime */
-};
-
-static void set_bringup_idt_handler(gate_desc *idt, int n, void *handler)
+static void __head set_bringup_idt_handler(gate_desc *idt, int n, void *handler)
{
#ifdef CONFIG_AMD_MEM_ENCRYPT
struct idt_data data;
@@ -586,45 +573,42 @@ static void set_bringup_idt_handler(gate_desc *idt, int n, void *handler)
#endif
}
-/* This runs while still in the direct mapping */
-static void __head startup_64_load_idt(unsigned long physbase)
+/* This may run while still in the direct mapping */
+static void __head startup_64_load_idt(void *handler)
{
- struct desc_ptr *desc = fixup_pointer(&bringup_idt_descr, physbase);
- gate_desc *idt = fixup_pointer(bringup_idt_table, physbase);
-
-
- if (IS_ENABLED(CONFIG_AMD_MEM_ENCRYPT)) {
- void *handler;
+ struct desc_ptr desc = {
+ .address = (unsigned long)&RIP_REL_REF(bringup_idt_table),
+ .size = sizeof(bringup_idt_table) - 1,
+ };
+ gate_desc *idt = (gate_desc *)desc.address;
+ if (IS_ENABLED(CONFIG_AMD_MEM_ENCRYPT))
/* VMM Communication Exception */
- handler = fixup_pointer(vc_no_ghcb, physbase);
set_bringup_idt_handler(idt, X86_TRAP_VC, handler);
- }
- desc->address = (unsigned long)idt;
- native_load_idt(desc);
+ native_load_idt(&desc);
}
/* This is used when running on kernel addresses */
void early_setup_idt(void)
{
- /* VMM Communication Exception */
- if (IS_ENABLED(CONFIG_AMD_MEM_ENCRYPT)) {
+ if (IS_ENABLED(CONFIG_AMD_MEM_ENCRYPT))
setup_ghcb();
- set_bringup_idt_handler(bringup_idt_table, X86_TRAP_VC, vc_boot_ghcb);
- }
- bringup_idt_descr.address = (unsigned long)bringup_idt_table;
- native_load_idt(&bringup_idt_descr);
+ startup_64_load_idt(vc_boot_ghcb);
}
/*
* Setup boot CPU state needed before kernel switches to virtual addresses.
*/
-void __head startup_64_setup_env(unsigned long physbase)
+void __head startup_64_setup_gdt_idt(void)
{
+ struct desc_ptr startup_gdt_descr = {
+ .address = (unsigned long)&RIP_REL_REF(startup_gdt),
+ .size = sizeof(startup_gdt) - 1,
+ };
+
/* Load GDT */
- startup_gdt_descr.address = (unsigned long)fixup_pointer(startup_gdt, physbase);
native_load_gdt(&startup_gdt_descr);
/* New GDT is live - reload data segment registers */
@@ -632,5 +616,5 @@ void __head startup_64_setup_env(unsigned long physbase)
"movl %%eax, %%ss\n"
"movl %%eax, %%es\n" : : "a"(__KERNEL_DS) : "memory");
- startup_64_load_idt(physbase);
+ startup_64_load_idt(&RIP_REL_REF(vc_no_ghcb));
}
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index d4918d03efb4..3cac98c61066 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -68,8 +68,6 @@ SYM_CODE_START_NOALIGN(startup_64)
/* Set up the stack for verify_cpu() */
leaq (__end_init_task - PTREGS_SIZE)(%rip), %rsp
- leaq _text(%rip), %rdi
-
/* Setup GSBASE to allow stack canary access for C code */
movl $MSR_GS_BASE, %ecx
leaq INIT_PER_CPU_VAR(fixed_percpu_data)(%rip), %rdx
@@ -77,7 +75,7 @@ SYM_CODE_START_NOALIGN(startup_64)
shrq $32, %rdx
wrmsr
- call startup_64_setup_env
+ call startup_64_setup_gdt_idt
/* Now switch to __KERNEL_CS so IRET works reliably */
pushq $__KERNEL_CS
--
2.43.0.687.g38aa6559b0-goog
Powered by blists - more mailing lists