linux-kernel - Re: [PATCH v2 1/2] PCI/IOV: Revert "PCI/IOV: Serialize sysfs sriov

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <Zc1E6MFaBKvndAD+@ubuntu>
Date: Wed, 14 Feb 2024 22:55:37 +0000
From: Jim Harris <jim.harris@...sung.com>
To: Bjorn Helgaas <helgaas@...nel.org>
CC: Leon Romanovsky <leonro@...dia.com>, Kuppuswamy Sathyanarayanan
	<sathyanarayanan.kuppuswamy@...ux.intel.com>, Bjorn Helgaas
	<bhelgaas@...gle.com>, "linux-pci@...r.kernel.org"
	<linux-pci@...r.kernel.org>, "linux-kernel@...r.kernel.org"
	<linux-kernel@...r.kernel.org>, Jason Gunthorpe <jgg@...dia.com>, "Alex
 Williamson" <alex.williamson@...hat.com>, Pierre Crégut
	<pierre.cregut@...nge.com>
Subject: Re: [PATCH v2 1/2] PCI/IOV: Revert
 "PCI/IOV: Serialize sysfs sriov_numvfs reads vs writes"

On Wed, Feb 14, 2024 at 11:50:00AM -0600, Bjorn Helgaas wrote:
> On Wed, Feb 14, 2024 at 05:04:08PM +0000, Jim Harris wrote:
> > On Wed, Feb 14, 2024 at 09:16:18AM +0200, Leon Romanovsky wrote:
> > > On Tue, Feb 13, 2024 at 01:45:56PM -0600, Bjorn Helgaas wrote:
> > > > On Tue, Feb 13, 2024 at 07:46:02PM +0200, Leon Romanovsky wrote:
> > > > > On Tue, Feb 13, 2024 at 09:59:54AM -0600, Bjorn Helgaas wrote:
> > > > > ...
> > > > 
> > > > > > I guess that means that if we apply this revert, the problem Pierre
> > > > > > reported will return.  Obviously the deadlock is more important than
> > > > > > the inconsistency Pierre observed, but from the user's point of view
> > > > > > this will look like a regression.
> > > > > > 
> > > > > > Maybe listening to netlink and then looking at sysfs isn't the
> > > > > > "correct" way to do this, but I don't want to just casually break
> > > > > > existing user code.  If we do contemplate doing the revert, at the
> > > > > > very least we should include specific details about what the user code
> > > > > > *should* do instead, at the level of the actual commands to use
> > > > > > instead of "ip monitor dev; cat ${path}/device/sriov_numvfs".
> > > > > 
> > > > > udevadm monitor will do the trick.
> > > > > 
> > > > > Another possible solution is to refactor the code to make sure that
> > > > > .probe on VFs happens only after sriov_numvfs is updated.
> > > > 
> > > > I like the idea of refactoring it so as to preserve the existing
> > > > ordering while also fixing the deadlock.
> > > 
> > > I think something like this will be enough (not tested). It will et the number of VFs
> > > before we make VFs visible to probe:
> > 
> > I'll push a v3, replacing the second patch with this one instead. Although
> > based on this discussion it seems we're moving towards squashing the revert
> > with Leon's suggested patch. Bjorn, I'll assume you're still OK with just
> > squashing these on your end.
> 
> Yep.
> 
> > I would like some input on how to actually test this though.
> > Presumably we see some event on device PF and we want to make sure
> > if we read PF/device/sriov_numvfs that we see the updated value. But
> > the only type of event I think we can expect is the PF's
> > sriov_numvfs CHANGE event.
> > 
> > Is there any way for VFs to be created outside of writing to the
> > sriov_numvfs sysfs file? My understanding is some older
> > devices/drivers will auto-create VFs when the PF is initialized, but
> > it wasn't clear from the bug report whether that was part of the
> > configuration here. Pierre, do you have any recollection on this?
> > 
> > Or maybe testing for this case just means compile and verify with
> > udevadm monitor that we see the CHANGE event before any of the VFs
> > are actually created...
> 
> I just want to make sure that Pierre's existing code continues to work
> unchanged.
> 
> Ideally we could revert 35ff867b7657 ("PCI/IOV: Serialize sysfs
> sriov_numvfs reads vs writes"), reproduce the problem with the shell
> script attached to https://bugzilla.kernel.org/show_bug.cgi?id=202991
> (I assume Pierre used a /sys/.../sriov_numvfs write to trigger the
> change).
 
That shell script generates no output when writing to sriov_numvfs, so I'm
unable to reproduce the problem.

Terminal 1:
# ip monitor dev ens7f0np0

Terminal 2:
# echo 1 > /sys/class/net/ens7f0np0/device/sriov_numvfs
#

No output in terminal 1.

I've done what testing I can with the proposed patch below, I'll send out the
v3 series here shortly.

> Then we could verify that with 35ff867b7657 still reverted but the
> change below added, the problem is no longer reproducible.
> 
> > > diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> > > index aaa33e8dc4c9..0cdfaae80594 100644
> > > --- a/drivers/pci/iov.c
> > > +++ b/drivers/pci/iov.c
> > > @@ -679,12 +679,14 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
> > >  	msleep(100);
> > >  	pci_cfg_access_unlock(dev);
> > >  
> > > +	iov->num_VFs = nr_virtfn;
> > >  	rc = sriov_add_vfs(dev, initial);
> > > -	if (rc)
> > > +	if (rc) {
> > > +		iov->num_VFs = 0;
> > >  		goto err_pcibios;
> > > +	}
> > >  
> > >  	kobject_uevent(&dev->dev.kobj, KOBJ_CHANGE);
> > > -	iov->num_VFs = nr_virtfn;
> > >  
> > >  	return 0;
> > >