[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7cfd82ef-a9d4-448e-bacf-f85279cfac63@foss.st.com>
Date: Wed, 14 Feb 2024 14:08:49 +0100
From: Alexandre TORGUE <alexandre.torgue@...s.st.com>
To: Rob Herring <robh@...nel.org>, <soc@...nel.org>,
Shawn Guo
<shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix
Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP
Linux Team <linux-imx@....com>, Rob Herring <robh+dt@...nel.org>,
Krzysztof
Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley
<conor+dt@...nel.org>,
Tsahee Zidenberg <tsahee@...apurnalabs.com>,
Antoine
Tenart <atenart@...nel.org>, Joel Stanley <joel@....id.au>,
Andrew Jeffery
<andrew@...econstruct.com.au>,
Ray Jui <rjui@...adcom.com>, Scott Branden
<sbranden@...adcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@...adcom.com>,
Andrew Lunn <andrew@...n.ch>,
Gregory Clement <gregory.clement@...tlin.com>,
Sebastian Hesselbarth
<sebastian.hesselbarth@...il.com>,
Jonathan Neuschäfer
<j.neuschaefer@....net>,
Thierry Reding <thierry.reding@...il.com>,
Jonathan
Hunter <jonathanh@...dia.com>,
Stefan Agner <stefan@...er.ch>,
Maxime
Coquelin <mcoquelin.stm32@...il.com>,
Benoît Cousson
<bcousson@...libre.com>,
Tony Lindgren <tony@...mide.com>, Chanho Min
<chanho.min@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
Geert
Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>, Linus Walleij <linusw@...nel.org>,
Imre Kaloz <kaloz@...nwrt.org>,
Bjorn
Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Masahiro Yamada <masahiroy@...nel.org>,
Nathan Chancellor
<nathan@...nel.org>,
Nicolas Schier <nicolas@...sle.eu>
CC: <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-aspeed@...ts.ozlabs.org>,
<openbmc@...ts.ozlabs.org>, <linux-tegra@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-omap@...r.kernel.org>, <linux-mediatek@...ts.infradead.org>,
<linux-renesas-soc@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
<linux-kbuild@...r.kernel.org>
Subject: Re: [PATCH 2/6] arm: dts: Fix dtc interrupt_provider warnings
Hi Rob
On 2/13/24 20:34, Rob Herring wrote:
> The dtc interrupt_provider warning is off by default. Fix all the warnings
> so it can be enabled.
>
> Signed-off-by: Rob Herring <robh@...nel.org>
> ---
> arch/arm/boot/dts/amazon/alpine.dtsi | 1 -
> arch/arm/boot/dts/aspeed/aspeed-g4.dtsi | 14 --------------
> arch/arm/boot/dts/aspeed/aspeed-g5.dtsi | 15 +--------------
> arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 18 ++----------------
> arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi | 3 +++
> arch/arm/boot/dts/broadcom/bcm-hr2.dtsi | 1 +
> arch/arm/boot/dts/broadcom/bcm-nsp.dtsi | 2 ++
> arch/arm/boot/dts/marvell/kirkwood-l-50.dts | 2 ++
> arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi | 2 ++
> arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi | 1 -
> arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi | 1 -
> arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi | 1 -
> arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts | 3 ---
> arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi | 2 +-
> arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi | 1 -
> arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi | 1 -
> arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi | 1 -
> arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi | 1 +
> .../boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi | 1 +
> arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts | 1 +
> arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts | 1 +
> arch/arm/boot/dts/st/stm32429i-eval.dts | 1 -
> arch/arm/boot/dts/st/stm32mp157c-dk2.dts | 1 -
> arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts | 1 -
> 24 files changed, 18 insertions(+), 58 deletions(-)
>
For ST part:
Reviewed-by: Alexandre Torgue <alexandre.torgue@...s.st.com>
Thanks
Alex
> diff --git a/arch/arm/boot/dts/amazon/alpine.dtsi b/arch/arm/boot/dts/amazon/alpine.dtsi
> index ff68dfb4eb78..90bd12feac01 100644
> --- a/arch/arm/boot/dts/amazon/alpine.dtsi
> +++ b/arch/arm/boot/dts/amazon/alpine.dtsi
> @@ -167,7 +167,6 @@ pcie@...00000 {
> msix: msix@...00000 {
> compatible = "al,alpine-msix";
> reg = <0x0 0xfbe00000 0x0 0x100000>;
> - interrupt-controller;
> msi-controller;
> al,msi-base-spi = <96>;
> al,msi-num-spis = <64>;
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
> index 530491ae5eb2..857cb26ed6d7 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
> +++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
> @@ -466,7 +466,6 @@ i2c_ic: interrupt-controller@0 {
> i2c0: i2c-bus@40 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x40 0x40>;
> compatible = "aspeed,ast2400-i2c-bus";
> @@ -482,7 +481,6 @@ i2c0: i2c-bus@40 {
> i2c1: i2c-bus@80 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x80 0x40>;
> compatible = "aspeed,ast2400-i2c-bus";
> @@ -498,7 +496,6 @@ i2c1: i2c-bus@80 {
> i2c2: i2c-bus@c0 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0xc0 0x40>;
> compatible = "aspeed,ast2400-i2c-bus";
> @@ -515,7 +512,6 @@ i2c2: i2c-bus@c0 {
> i2c3: i2c-bus@100 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x100 0x40>;
> compatible = "aspeed,ast2400-i2c-bus";
> @@ -532,7 +528,6 @@ i2c3: i2c-bus@100 {
> i2c4: i2c-bus@140 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x140 0x40>;
> compatible = "aspeed,ast2400-i2c-bus";
> @@ -549,7 +544,6 @@ i2c4: i2c-bus@140 {
> i2c5: i2c-bus@180 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x180 0x40>;
> compatible = "aspeed,ast2400-i2c-bus";
> @@ -566,7 +560,6 @@ i2c5: i2c-bus@180 {
> i2c6: i2c-bus@1c0 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x1c0 0x40>;
> compatible = "aspeed,ast2400-i2c-bus";
> @@ -583,7 +576,6 @@ i2c6: i2c-bus@1c0 {
> i2c7: i2c-bus@300 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x300 0x40>;
> compatible = "aspeed,ast2400-i2c-bus";
> @@ -600,7 +592,6 @@ i2c7: i2c-bus@300 {
> i2c8: i2c-bus@340 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x340 0x40>;
> compatible = "aspeed,ast2400-i2c-bus";
> @@ -617,7 +608,6 @@ i2c8: i2c-bus@340 {
> i2c9: i2c-bus@380 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x380 0x40>;
> compatible = "aspeed,ast2400-i2c-bus";
> @@ -634,7 +624,6 @@ i2c9: i2c-bus@380 {
> i2c10: i2c-bus@3c0 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x3c0 0x40>;
> compatible = "aspeed,ast2400-i2c-bus";
> @@ -651,7 +640,6 @@ i2c10: i2c-bus@3c0 {
> i2c11: i2c-bus@400 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x400 0x40>;
> compatible = "aspeed,ast2400-i2c-bus";
> @@ -668,7 +656,6 @@ i2c11: i2c-bus@400 {
> i2c12: i2c-bus@440 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x440 0x40>;
> compatible = "aspeed,ast2400-i2c-bus";
> @@ -685,7 +672,6 @@ i2c12: i2c-bus@440 {
> i2c13: i2c-bus@480 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x480 0x40>;
> compatible = "aspeed,ast2400-i2c-bus";
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
> index 04f98d1dbb97..e6f3cf3c721e 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
> +++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
> @@ -363,6 +363,7 @@ sgpio: sgpio@...80200 {
> interrupts = <40>;
> reg = <0x1e780200 0x0100>;
> clocks = <&syscon ASPEED_CLK_APB>;
> + #interrupt-cells = <2>;
> interrupt-controller;
> bus-frequency = <12000000>;
> pinctrl-names = "default";
> @@ -594,7 +595,6 @@ i2c_ic: interrupt-controller@0 {
> i2c0: i2c-bus@40 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x40 0x40>;
> compatible = "aspeed,ast2500-i2c-bus";
> @@ -610,7 +610,6 @@ i2c0: i2c-bus@40 {
> i2c1: i2c-bus@80 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x80 0x40>;
> compatible = "aspeed,ast2500-i2c-bus";
> @@ -626,7 +625,6 @@ i2c1: i2c-bus@80 {
> i2c2: i2c-bus@c0 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0xc0 0x40>;
> compatible = "aspeed,ast2500-i2c-bus";
> @@ -643,7 +641,6 @@ i2c2: i2c-bus@c0 {
> i2c3: i2c-bus@100 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x100 0x40>;
> compatible = "aspeed,ast2500-i2c-bus";
> @@ -660,7 +657,6 @@ i2c3: i2c-bus@100 {
> i2c4: i2c-bus@140 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x140 0x40>;
> compatible = "aspeed,ast2500-i2c-bus";
> @@ -677,7 +673,6 @@ i2c4: i2c-bus@140 {
> i2c5: i2c-bus@180 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x180 0x40>;
> compatible = "aspeed,ast2500-i2c-bus";
> @@ -694,7 +689,6 @@ i2c5: i2c-bus@180 {
> i2c6: i2c-bus@1c0 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x1c0 0x40>;
> compatible = "aspeed,ast2500-i2c-bus";
> @@ -711,7 +705,6 @@ i2c6: i2c-bus@1c0 {
> i2c7: i2c-bus@300 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x300 0x40>;
> compatible = "aspeed,ast2500-i2c-bus";
> @@ -728,7 +721,6 @@ i2c7: i2c-bus@300 {
> i2c8: i2c-bus@340 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x340 0x40>;
> compatible = "aspeed,ast2500-i2c-bus";
> @@ -745,7 +737,6 @@ i2c8: i2c-bus@340 {
> i2c9: i2c-bus@380 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x380 0x40>;
> compatible = "aspeed,ast2500-i2c-bus";
> @@ -762,7 +753,6 @@ i2c9: i2c-bus@380 {
> i2c10: i2c-bus@3c0 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x3c0 0x40>;
> compatible = "aspeed,ast2500-i2c-bus";
> @@ -779,7 +769,6 @@ i2c10: i2c-bus@3c0 {
> i2c11: i2c-bus@400 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x400 0x40>;
> compatible = "aspeed,ast2500-i2c-bus";
> @@ -796,7 +785,6 @@ i2c11: i2c-bus@400 {
> i2c12: i2c-bus@440 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x440 0x40>;
> compatible = "aspeed,ast2500-i2c-bus";
> @@ -813,7 +801,6 @@ i2c12: i2c-bus@440 {
> i2c13: i2c-bus@480 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
>
> reg = <0x480 0x40>;
> compatible = "aspeed,ast2500-i2c-bus";
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
> index c4d1faade8be..29f94696d8b1 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
> +++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
> @@ -474,6 +474,7 @@ sgpiom0: sgpiom@...80500 {
> reg = <0x1e780500 0x100>;
> interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&syscon ASPEED_CLK_APB2>;
> + #interrupt-cells = <2>;
> interrupt-controller;
> bus-frequency = <12000000>;
> pinctrl-names = "default";
> @@ -488,6 +489,7 @@ sgpiom1: sgpiom@...80600 {
> reg = <0x1e780600 0x100>;
> interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&syscon ASPEED_CLK_APB2>;
> + #interrupt-cells = <2>;
> interrupt-controller;
> bus-frequency = <12000000>;
> pinctrl-names = "default";
> @@ -902,7 +904,6 @@ &i2c {
> i2c0: i2c-bus@80 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
> reg = <0x80 0x80>;
> compatible = "aspeed,ast2600-i2c-bus";
> clocks = <&syscon ASPEED_CLK_APB2>;
> @@ -917,7 +918,6 @@ i2c0: i2c-bus@80 {
> i2c1: i2c-bus@100 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
> reg = <0x100 0x80>;
> compatible = "aspeed,ast2600-i2c-bus";
> clocks = <&syscon ASPEED_CLK_APB2>;
> @@ -932,7 +932,6 @@ i2c1: i2c-bus@100 {
> i2c2: i2c-bus@180 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
> reg = <0x180 0x80>;
> compatible = "aspeed,ast2600-i2c-bus";
> clocks = <&syscon ASPEED_CLK_APB2>;
> @@ -947,7 +946,6 @@ i2c2: i2c-bus@180 {
> i2c3: i2c-bus@200 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
> reg = <0x200 0x80>;
> compatible = "aspeed,ast2600-i2c-bus";
> clocks = <&syscon ASPEED_CLK_APB2>;
> @@ -962,7 +960,6 @@ i2c3: i2c-bus@200 {
> i2c4: i2c-bus@280 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
> reg = <0x280 0x80>;
> compatible = "aspeed,ast2600-i2c-bus";
> clocks = <&syscon ASPEED_CLK_APB2>;
> @@ -977,7 +974,6 @@ i2c4: i2c-bus@280 {
> i2c5: i2c-bus@300 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
> reg = <0x300 0x80>;
> compatible = "aspeed,ast2600-i2c-bus";
> clocks = <&syscon ASPEED_CLK_APB2>;
> @@ -992,7 +988,6 @@ i2c5: i2c-bus@300 {
> i2c6: i2c-bus@380 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
> reg = <0x380 0x80>;
> compatible = "aspeed,ast2600-i2c-bus";
> clocks = <&syscon ASPEED_CLK_APB2>;
> @@ -1007,7 +1002,6 @@ i2c6: i2c-bus@380 {
> i2c7: i2c-bus@400 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
> reg = <0x400 0x80>;
> compatible = "aspeed,ast2600-i2c-bus";
> clocks = <&syscon ASPEED_CLK_APB2>;
> @@ -1022,7 +1016,6 @@ i2c7: i2c-bus@400 {
> i2c8: i2c-bus@480 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
> reg = <0x480 0x80>;
> compatible = "aspeed,ast2600-i2c-bus";
> clocks = <&syscon ASPEED_CLK_APB2>;
> @@ -1037,7 +1030,6 @@ i2c8: i2c-bus@480 {
> i2c9: i2c-bus@500 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
> reg = <0x500 0x80>;
> compatible = "aspeed,ast2600-i2c-bus";
> clocks = <&syscon ASPEED_CLK_APB2>;
> @@ -1052,7 +1044,6 @@ i2c9: i2c-bus@500 {
> i2c10: i2c-bus@580 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
> reg = <0x580 0x80>;
> compatible = "aspeed,ast2600-i2c-bus";
> clocks = <&syscon ASPEED_CLK_APB2>;
> @@ -1067,7 +1058,6 @@ i2c10: i2c-bus@580 {
> i2c11: i2c-bus@600 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
> reg = <0x600 0x80>;
> compatible = "aspeed,ast2600-i2c-bus";
> clocks = <&syscon ASPEED_CLK_APB2>;
> @@ -1082,7 +1072,6 @@ i2c11: i2c-bus@600 {
> i2c12: i2c-bus@680 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
> reg = <0x680 0x80>;
> compatible = "aspeed,ast2600-i2c-bus";
> clocks = <&syscon ASPEED_CLK_APB2>;
> @@ -1097,7 +1086,6 @@ i2c12: i2c-bus@680 {
> i2c13: i2c-bus@700 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
> reg = <0x700 0x80>;
> compatible = "aspeed,ast2600-i2c-bus";
> clocks = <&syscon ASPEED_CLK_APB2>;
> @@ -1112,7 +1100,6 @@ i2c13: i2c-bus@700 {
> i2c14: i2c-bus@780 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
> reg = <0x780 0x80>;
> compatible = "aspeed,ast2600-i2c-bus";
> clocks = <&syscon ASPEED_CLK_APB2>;
> @@ -1127,7 +1114,6 @@ i2c14: i2c-bus@780 {
> i2c15: i2c-bus@800 {
> #address-cells = <1>;
> #size-cells = <0>;
> - #interrupt-cells = <1>;
> reg = <0x800 0x80>;
> compatible = "aspeed,ast2600-i2c-bus";
> clocks = <&syscon ASPEED_CLK_APB2>;
> diff --git a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
> index f9f79ed82518..07ca0d993c9f 100644
> --- a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
> +++ b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
> @@ -167,6 +167,7 @@ gpio_crmu: gpio@...4800 {
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> interrupt-parent = <&mailbox>;
> interrupts = <0>;
> };
> @@ -247,6 +248,7 @@ gpio_ccm: gpio@...0a000 {
> gpio-controller;
> interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> i2c1: i2c@...0b000 {
> @@ -518,6 +520,7 @@ gpio_asiu: gpio@...a5000 {
> gpio-controller;
>
> interrupt-controller;
> + #interrupt-cells = <2>;
> interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> gpio-ranges = <&pinctrl 0 42 1>,
> <&pinctrl 1 44 3>,
> diff --git a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
> index 788a6806191a..75545b10ef2f 100644
> --- a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
> +++ b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
> @@ -200,6 +200,7 @@ gpiob: gpio@...00 {
> gpio-controller;
> ngpios = <4>;
> interrupt-controller;
> + #interrupt-cells = <2>;
> interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> diff --git a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
> index 9d20ba3b1ffb..6a4482c93167 100644
> --- a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
> +++ b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
> @@ -180,6 +180,7 @@ gpioa: gpio@20 {
> gpio-controller;
> ngpios = <32>;
> interrupt-controller;
> + #interrupt-cells = <2>;
> interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> gpio-ranges = <&pinctrl 0 0 32>;
> };
> @@ -352,6 +353,7 @@ gpiob: gpio@...00 {
> gpio-controller;
> ngpios = <4>;
> interrupt-controller;
> + #interrupt-cells = <2>;
> interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
> index dffb9f84e67c..c841eb8e7fb1 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
> +++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
> @@ -65,6 +65,7 @@ i2c@...00 {
> gpio2: gpio-expander@20 {
> #gpio-cells = <2>;
> #interrupt-cells = <2>;
> + interrupt-controller;
> compatible = "semtech,sx1505q";
> reg = <0x20>;
>
> @@ -79,6 +80,7 @@ gpio2: gpio-expander@20 {
> gpio3: gpio-expander@21 {
> #gpio-cells = <2>;
> #interrupt-cells = <2>;
> + interrupt-controller;
> compatible = "semtech,sx1505q";
> reg = <0x21>;
>
> diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
> index fd671c7a1e5d..6e1f0f164cb4 100644
> --- a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
> +++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
> @@ -120,6 +120,7 @@ gpio0: gpio@0 {
> interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
> <3 IRQ_TYPE_LEVEL_HIGH>,
> <4 IRQ_TYPE_LEVEL_HIGH>;
> + #interrupt-cells = <2>;
> interrupt-controller;
> };
>
> @@ -128,6 +129,7 @@ gpio1: gpio@1 {
> gpio-controller;
> #gpio-cells = <2>;
> interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
> + #interrupt-cells = <2>;
> interrupt-controller;
> };
>
> diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
> index 1640763fd4af..ff0d684622f7 100644
> --- a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
> +++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
> @@ -997,7 +997,6 @@ touchscreen@41 {
> compatible = "st,stmpe811";
> reg = <0x41>;
> irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
> - interrupt-controller;
> id = <0>;
> blocks = <0x5>;
> irq-trigger = <0x1>;
> diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
> index 3b6fad273cab..d38f1dd38a90 100644
> --- a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
> +++ b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
> @@ -980,7 +980,6 @@ touchscreen@41 {
> compatible = "st,stmpe811";
> reg = <0x41>;
> irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
> - interrupt-controller;
> id = <0>;
> blocks = <0x5>;
> irq-trigger = <0x1>;
> diff --git a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
> index 4eb526fe9c55..81c8a5fd92cc 100644
> --- a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
> +++ b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
> @@ -861,7 +861,6 @@ touchscreen@41 {
> compatible = "st,stmpe811";
> reg = <0x41>;
> irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
> - interrupt-controller;
> id = <0>;
> blocks = <0x5>;
> irq-trigger = <0x1>;
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
> index db8c332df6a1..cad112e05475 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
> +++ b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
> @@ -227,7 +227,6 @@ bridge@1,0 {
>
> #address-cells = <3>;
> #size-cells = <2>;
> - #interrupt-cells = <1>;
>
> bridge@2,1 {
> compatible = "pci10b5,8605";
> @@ -235,7 +234,6 @@ bridge@2,1 {
>
> #address-cells = <3>;
> #size-cells = <2>;
> - #interrupt-cells = <1>;
>
> /* Intel Corporation I210 Gigabit Network Connection */
> ethernet@3,0 {
> @@ -250,7 +248,6 @@ bridge@2,2 {
>
> #address-cells = <3>;
> #size-cells = <2>;
> - #interrupt-cells = <1>;
>
> /* Intel Corporation I210 Gigabit Network Connection */
> switch_nic: ethernet@4,0 {
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
> index 99f4f6ac71d4..c1ae7c47b442 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
> @@ -245,6 +245,7 @@ pca9539: pca9539@74 {
> reg = <0x74>;
> gpio-controller;
> #gpio-cells = <2>;
> + #interrupt-cells = <2>;
> interrupt-controller;
> interrupt-parent = <&gpio2>;
> interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> @@ -390,7 +391,6 @@ pci_root: root@0,0 {
>
> #address-cells = <3>;
> #size-cells = <2>;
> - #interrupt-cells = <1>;
> };
> };
>
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
> index 2ae93f57fe5a..ea40623d12e5 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
> @@ -626,7 +626,6 @@ stmpe811@41 {
> blocks = <0x5>;
> id = <0>;
> interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
> - interrupt-controller;
> interrupt-parent = <&gpio4>;
> irq-trigger = <0x1>;
> pinctrl-names = "default";
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
> index 55c90f6393ad..d3a7a6eeb8e0 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
> @@ -550,7 +550,6 @@ stmpe811@41 {
> blocks = <0x5>;
> interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
> interrupt-parent = <&gpio6>;
> - interrupt-controller;
> id = <0>;
> irq-trigger = <0x1>;
> pinctrl-names = "default";
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
> index a63e73adc1fc..42b2ba23aefc 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
> @@ -225,7 +225,6 @@ da9063: pmic@58 {
> pinctrl-0 = <&pinctrl_pmic>;
> interrupt-parent = <&gpio2>;
> interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
> - interrupt-controller;
>
> onkey {
> compatible = "dlg,da9063-onkey";
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
> index 113974520d54..c0c47adc5866 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
> @@ -124,6 +124,7 @@ pmic@58 {
> reg = <0x58>;
> interrupt-parent = <&gpio2>;
> interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
> + #interrupt-cells = <2>;
> interrupt-controller;
>
> regulators {
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
> index 86b4269e0e01..85e278eb2016 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
> @@ -100,6 +100,7 @@ pmic: pmic@58 {
> interrupt-parent = <&gpio1>;
> interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> + #interrupt-cells = <2>;
> gpio-controller;
> #gpio-cells = <2>;
>
> diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
> index 12361fcbe24a..1b965652291b 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
> +++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
> @@ -63,6 +63,7 @@ pca9554: io-expander@25 {
> gpio-controller;
> #gpio-cells = <2>;
> #interrupt-cells = <2>;
> + interrupt-controller;
> reg = <0x25>;
> };
>
> diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
> index b0ed68af0546..029f49be40e3 100644
> --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
> +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
> @@ -338,6 +338,7 @@ gpio6: io-expander@22 {
> reg = <0x22>;
> gpio-controller;
> #gpio-cells = <2>;
> + #interrupt-cells = <2>;
> interrupt-controller;
> interrupt-parent = <&gpio3>;
> interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> diff --git a/arch/arm/boot/dts/st/stm32429i-eval.dts b/arch/arm/boot/dts/st/stm32429i-eval.dts
> index 576235ec3c51..afa417b34b25 100644
> --- a/arch/arm/boot/dts/st/stm32429i-eval.dts
> +++ b/arch/arm/boot/dts/st/stm32429i-eval.dts
> @@ -222,7 +222,6 @@ stmpe1600: stmpe1600@42 {
> reg = <0x42>;
> interrupts = <8 3>;
> interrupt-parent = <&gpioi>;
> - interrupt-controller;
> wakeup-source;
>
> stmpegpio: stmpe_gpio {
> diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
> index 510cca5acb79..7a701f7ef0c7 100644
> --- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
> +++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
> @@ -64,7 +64,6 @@ touchscreen@38 {
> reg = <0x38>;
> interrupts = <2 2>;
> interrupt-parent = <&gpiof>;
> - interrupt-controller;
> touchscreen-size-x = <480>;
> touchscreen-size-y = <800>;
> status = "okay";
> diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
> index c8e55642f9c6..3e834fc7e370 100644
> --- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
> +++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
> @@ -415,7 +415,6 @@ stmpe811@41 {
> reg = <0x41>;
> interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
> interrupt-parent = <&gpio2>;
> - interrupt-controller;
> id = <0>;
> blocks = <0x5>;
> irq-trigger = <0x1>;
>
Powered by blists - more mailing lists