[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0c551a84-5c4a-4d79-ae59-d5b0d34b017d@foss.st.com>
Date: Wed, 14 Feb 2024 14:40:58 +0100
From: Alexandre TORGUE <alexandre.torgue@...s.st.com>
To: Raphael Gallais-Pou <raphael.gallais-pou@...s.st.com>,
Rob Herring
<robh+dt@...nel.org>,
Krzysztof Kozlowski
<krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Neil Armstrong
<neil.armstrong@...aro.org>,
Jessica Zhang <quic_jesszhan@...cinc.com>,
Sam
Ravnborg <sam@...nborg.org>,
Maarten Lankhorst
<maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>
CC: <devicetree@...r.kernel.org>, <linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
<dri-devel@...ts.freedesktop.org>,
Yannick Fertre
<yannick.fertre@...s.st.com>
Subject: Re: [PATCH 0/5] Add display support for stm32mp135f-dk board
Hi Raphael
On 2/5/24 10:06, Raphael Gallais-Pou wrote:
> This serie aims to enable display support for the stm32mp135f-dk board
>
> Those are only patches of the device-tree since the driver support has
> already been added [1].
>
> It respectivelly:
> - adds support for the display controller on stm32mp135
> - adds pinctrl for the display controller
> - enables panel, backlight and display controller on
> stm32mp135f-dk
>
> Finally it fixes the flags on the panel default mode in the
> 'panel-simple' driver, allowing to override the default mode by one
> described in the device tree, and push further the blanking limit on the
> panel.
>
> [1] commit 1726cee3d053 ("drm/stm: ltdc: support of new hardware version")
>
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@...s.st.com>
> ---
> Raphael Gallais-Pou (5):
> ARM: dts: stm32: add LTDC support for STM32MP13x SoC family
> ARM: dts: stm32: add LTDC pinctrl on STM32MP13x SoC family
> ARM: dts: stm32: enable display support on stm32mp135f-dk board
> drm/panel: simple: fix flags on RK043FN48H
> drm/panel: simple: push blanking limit on RK32FN48H
>
> arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 57 +++++++++++++++++++++++++++++
> arch/arm/boot/dts/st/stm32mp135.dtsi | 11 ++++++
> arch/arm/boot/dts/st/stm32mp135f-dk.dts | 55 ++++++++++++++++++++++++++++
> drivers/gpu/drm/panel/panel-simple.c | 7 ++--
> 4 files changed, 127 insertions(+), 3 deletions(-)
> ---
> base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
> change-id: 20240124-ltdc_mp13-2f86a782424c
>
> Best regards,
I got the following errors during YAML verification:
arch/arm/boot/dts/st/stm32mp135f-dk.dtb: /soc/i2c@...12000/pinctrl@21:
failed to match any schema with compatible: ['microchip,mcp23017']
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb:
panel-backlight: 'default-brightness-level' does not match any of the
regexes: 'pinctrl-[0-9]+'
from schema $id:
http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml#
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb:
panel-rgb: data-mapping:0: 'bgr666' is not one of ['jeida-18',
'jeida-24', 'vesa-24']
from schema $id:
http://devicetree.org/schemas/display/panel/panel-simple.yaml#
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb:
panel-rgb: compatible: ['rocktech,rk043fn48h', 'panel-dpi'] is too long
from schema $id:
http://devicetree.org/schemas/display/panel/panel-simple.yaml#
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb:
panel-rgb: data-mapping: False schema does not allow ['bgr666']
from schema $id:
http://devicetree.org/schemas/display/panel/panel-simple.yaml#
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb:
panel-rgb: 'height-mm', 'panel-timing', 'width-mm' do not match any of
the regexes: 'pinctrl-[0-9]+'
from schema $id:
http://devicetree.org/schemas/display/panel/panel-simple.yaml#
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb:
panel-rgb: 'data-mapping' does not match any of the regexes:
'pinctrl-[0-9]+'
from schema $id:
http://devicetree.org/schemas/display/panel/panel-dpi.yaml#
Do I miss something ?
Alex
Powered by blists - more mailing lists