[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240214-mbly-gpio-v1-11-f88c0ccf372b@bootlin.com>
Date: Wed, 14 Feb 2024 17:24:04 +0100
From: Théo Lebrun <theo.lebrun@...tlin.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Philipp Zabel <p.zabel@...gutronix.de>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>
Cc: linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mips@...r.kernel.org, Gregory CLEMENT <gregory.clement@...tlin.com>,
Vladimir Kondratiev <vladimir.kondratiev@...ileye.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Tawfik Bayouk <tawfik.bayouk@...ileye.com>,
Théo Lebrun <theo.lebrun@...tlin.com>
Subject: [PATCH 11/23] pinctrl: nomadik: follow conditional kernel coding
conventions
Fix strict checkpatch warnings relative to if-else blocks and bool
expressions. Message types addressed:
CHECK: Comparison to NULL could be written "!nmk_cfg_params[index].choice"
CHECK: Unbalanced braces around else statement
CHECK: Using comparison to false is error prone
CHECK: Using comparison to true is error prone
CHECK: braces {} should be used on all arms of this statement
Before: 0 errors, 1 warnings, 16 checks.
After: 0 errors, 1 warnings, 7 checks.
Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
---
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index 83e7868bc1d7..8099dd947701 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -377,7 +377,7 @@ static void nmk_prcm_altcx_set_mode(struct nmk_pinctrl *npct,
*/
if (!alt_num) {
for (i = 0 ; i < PRCM_IDX_GPIOCR_ALTC_MAX ; i++) {
- if (pin_desc->altcx[i].used == true) {
+ if (pin_desc->altcx[i].used) {
reg = gpiocr_regs[pin_desc->altcx[i].reg_index];
bit = pin_desc->altcx[i].control_bit;
if (readl(npct->prcm_base + reg) & BIT(bit)) {
@@ -392,7 +392,7 @@ static void nmk_prcm_altcx_set_mode(struct nmk_pinctrl *npct,
}
alt_index = alt_num - 1;
- if (pin_desc->altcx[alt_index].used == false) {
+ if (!pin_desc->altcx[alt_index].used) {
dev_warn(npct->dev,
"PRCM GPIOCR: pin %i: alternate-C%i does not exist\n",
offset, alt_num);
@@ -406,7 +406,7 @@ static void nmk_prcm_altcx_set_mode(struct nmk_pinctrl *npct,
for (i = 0 ; i < PRCM_IDX_GPIOCR_ALTC_MAX ; i++) {
if (i == alt_index)
continue;
- if (pin_desc->altcx[i].used == true) {
+ if (pin_desc->altcx[i].used) {
reg = gpiocr_regs[pin_desc->altcx[i].reg_index];
bit = pin_desc->altcx[i].control_bit;
if (readl(npct->prcm_base + reg) & BIT(bit)) {
@@ -494,7 +494,7 @@ int __maybe_unused nmk_prcm_gpiocr_get_mode(struct pinctrl_dev *pctldev, int gpi
pin_desc = npct->soc->altcx_pins + i;
gpiocr_regs = npct->soc->prcm_gpiocr_registers;
for (i = 0; i < PRCM_IDX_GPIOCR_ALTC_MAX; i++) {
- if (pin_desc->altcx[i].used == true) {
+ if (pin_desc->altcx[i].used) {
reg = gpiocr_regs[pin_desc->altcx[i].reg_index];
bit = pin_desc->altcx[i].control_bit;
if (readl(npct->prcm_base + reg) & BIT(bit))
@@ -676,9 +676,9 @@ static const struct nmk_cfg_param nmk_cfg_params[] = {
static int nmk_dt_pin_config(int index, int val, unsigned long *config)
{
- if (nmk_cfg_params[index].choice == NULL)
+ if (!nmk_cfg_params[index].choice) {
*config = nmk_cfg_params[index].config;
- else {
+ } else {
/* test if out of range */
if (val < nmk_cfg_params[index].size) {
*config = nmk_cfg_params[index].config |
@@ -1102,9 +1102,9 @@ static int nmk_pin_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
if (gpiomode)
/* No glitch when going to GPIO mode */
__nmk_gpio_set_mode(nmk_chip, bit, NMK_GPIO_ALT_GPIO);
- if (output)
+ if (output) {
__nmk_gpio_make_output(nmk_chip, bit, val);
- else {
+ } else {
__nmk_gpio_make_input(nmk_chip, bit);
__nmk_gpio_set_pull(nmk_chip, bit, pull);
}
--
2.43.1
Powered by blists - more mailing lists