| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240214-mbly-gpio-v1-1-f88c0ccf372b@bootlin.com>
Date: Wed, 14 Feb 2024 17:23:54 +0100
From: Théo Lebrun <theo.lebrun@...tlin.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Philipp Zabel <p.zabel@...gutronix.de>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>
Cc: linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mips@...r.kernel.org, Gregory CLEMENT <gregory.clement@...tlin.com>,
Vladimir Kondratiev <vladimir.kondratiev@...ileye.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Tawfik Bayouk <tawfik.bayouk@...ileye.com>,
Théo Lebrun <theo.lebrun@...tlin.com>
Subject: [PATCH 01/23] dt-bindings: gpio: nomadik: convert into yaml format
Create gpio/st,nomadik-gpio.yaml json-schema dt-bindings file as a
direct translation from gpio-nmk.txt. Remove the txt file.
Add clocks and gpio-ranges properties which were missing and are being
used in Nomadik devicetrees.
Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
---
.../devicetree/bindings/gpio/gpio-nmk.txt | 31 ---------
.../devicetree/bindings/gpio/st,nomadik-gpio.yaml | 75 ++++++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 76 insertions(+), 31 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
deleted file mode 100644
index 8315ac7780ef..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Nomadik GPIO controller
-
-Required properties:
-- compatible : Should be "st,nomadik-gpio".
-- reg : Physical base address and length of the controller's registers.
-- interrupts : The interrupt outputs from the controller.
-- #gpio-cells : Should be two:
- The first cell is the pin number.
- The second cell is used to specify optional parameters:
- - bits[3:0] trigger type and level flags:
- 1 = low-to-high edge triggered.
- 2 = high-to-low edge triggered.
- 4 = active high level-sensitive.
- 8 = active low level-sensitive.
-- gpio-controller : Marks the device node as a GPIO controller.
-- interrupt-controller : Marks the device node as an interrupt controller.
-- gpio-bank : Specifies which bank a controller owns.
-- st,supports-sleepmode : Specifies whether controller can sleep or not
-
-Example:
-
- gpio1: gpio@...2e080 {
- compatible = "st,nomadik-gpio";
- reg = <0x8012e080 0x80>;
- interrupts = <0 120 0x4>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- st,supports-sleepmode;
- gpio-bank = <1>;
- };
diff --git a/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
new file mode 100644
index 000000000000..a999908173d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/st,nomadik-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nomadik GPIO controller
+
+description:
+ The Nomadik GPIO driver handles Nomadik SoC GPIO blocks. This block has also
+ been called ST STA2X11. On the Nomadik platform, this driver is intertwined
+ with pinctrl-nomadik.
+
+maintainers:
+ - Linus Walleij <linus.walleij@...aro.org>
+
+properties:
+ $nodename:
+ pattern: "^gpio@[0-9a-f]+$"
+
+ compatible:
+ const: st,nomadik-gpio
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-controller: true
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ gpio-bank:
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ st,supports-sleepmode:
+ description: Whether the controller can sleep or not.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ clocks:
+ maxItems: 1
+
+ gpio-ranges:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#gpio-cells"
+ - gpio-controller
+ - interrupt-controller
+ - gpio-bank
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ gpio1: gpio@...2e080 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x8012e080 0x80>;
+ interrupts = <0 120 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ st,supports-sleepmode;
+ gpio-bank = <1>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 9134384171fe..0cb2c459d1cf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2465,6 +2465,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git
F: Documentation/devicetree/bindings/arm/ste-*
F: Documentation/devicetree/bindings/arm/ux500.yaml
F: Documentation/devicetree/bindings/arm/ux500/
+F: Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
F: Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
F: arch/arm/boot/dts/st/ste-*
F: arch/arm/mach-nomadik/
--
2.43.1
Powered by blists - more mailing lists