[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240215-mbly-i2c-v1-8-19a336e91dca@bootlin.com>
Date: Thu, 15 Feb 2024 17:52:15 +0100
From: Théo Lebrun <theo.lebrun@...tlin.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Andi Shyti <andi.shyti@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>
Cc: linux-arm-kernel@...ts.infradead.org, linux-i2c@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-mips@...r.kernel.org, Gregory Clement <gregory.clement@...tlin.com>,
Vladimir Kondratiev <vladimir.kondratiev@...ileye.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Tawfik Bayouk <tawfik.bayouk@...ileye.com>,
Théo Lebrun <theo.lebrun@...tlin.com>
Subject: [PATCH 08/13] i2c: nomadik: replace jiffies by ktime for FIFO
flushing timeout
The FIFO flush function uses a jiffies amount to detect timeouts as the
flushing is async. Replace with ktime to get more accurate precision
and support short timeouts.
Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
---
drivers/i2c/busses/i2c-nomadik.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index e68b8e0d7919..afd54999bbbb 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -219,8 +219,8 @@ static inline void i2c_clr_bit(void __iomem *reg, u32 mask)
static int flush_i2c_fifo(struct nmk_i2c_dev *priv)
{
#define LOOP_ATTEMPTS 10
+ ktime_t timeout;
int i;
- unsigned long timeout;
/*
* flush the transmit and receive FIFO. The flushing
@@ -232,9 +232,9 @@ static int flush_i2c_fifo(struct nmk_i2c_dev *priv)
writel((I2C_CR_FTX | I2C_CR_FRX), priv->virtbase + I2C_CR);
for (i = 0; i < LOOP_ATTEMPTS; i++) {
- timeout = jiffies + priv->adap.timeout;
+ timeout = ktime_add_us(ktime_get(), priv->timeout_usecs);
- while (!time_after(jiffies, timeout)) {
+ while (ktime_after(timeout, ktime_get())) {
if ((readl(priv->virtbase + I2C_CR) &
(I2C_CR_FTX | I2C_CR_FRX)) == 0)
return 0;
--
2.43.1
Powered by blists - more mailing lists