| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240215-mbly-i2c-v1-4-19a336e91dca@bootlin.com>
Date: Thu, 15 Feb 2024 17:52:11 +0100
From: Théo Lebrun <theo.lebrun@...tlin.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Andi Shyti <andi.shyti@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>
Cc: linux-arm-kernel@...ts.infradead.org, linux-i2c@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-mips@...r.kernel.org, Gregory Clement <gregory.clement@...tlin.com>,
Vladimir Kondratiev <vladimir.kondratiev@...ileye.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Tawfik Bayouk <tawfik.bayouk@...ileye.com>,
Théo Lebrun <theo.lebrun@...tlin.com>
Subject: [PATCH 04/13] i2c: nomadik: rename private struct pointers from
dev to priv
Disambiguate the usage of dev as a variable name; it is usually best to
keep it reserved for struct device pointers. Avoid having multiple
names for the same struct pointer (previously: dev, nmk, nmk_i2c).
Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
---
drivers/i2c/busses/i2c-nomadik.c | 428 +++++++++++++++++++--------------------
1 file changed, 214 insertions(+), 214 deletions(-)
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index b10574d42b7a..cd511c884f99 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -206,12 +206,12 @@ static inline void i2c_clr_bit(void __iomem *reg, u32 mask)
/**
* flush_i2c_fifo() - This function flushes the I2C FIFO
- * @dev: private data of I2C Driver
+ * @priv: private data of I2C Driver
*
* This function flushes the I2C Tx and Rx FIFOs. It returns
* 0 on successful flushing of FIFO
*/
-static int flush_i2c_fifo(struct nmk_i2c_dev *dev)
+static int flush_i2c_fifo(struct nmk_i2c_dev *priv)
{
#define LOOP_ATTEMPTS 10
int i;
@@ -224,19 +224,19 @@ static int flush_i2c_fifo(struct nmk_i2c_dev *dev)
* bits, until then no one must access Tx, Rx FIFO and
* should poll on these bits waiting for the completion.
*/
- writel((I2C_CR_FTX | I2C_CR_FRX), dev->virtbase + I2C_CR);
+ writel((I2C_CR_FTX | I2C_CR_FRX), priv->virtbase + I2C_CR);
for (i = 0; i < LOOP_ATTEMPTS; i++) {
- timeout = jiffies + dev->adap.timeout;
+ timeout = jiffies + priv->adap.timeout;
while (!time_after(jiffies, timeout)) {
- if ((readl(dev->virtbase + I2C_CR) &
+ if ((readl(priv->virtbase + I2C_CR) &
(I2C_CR_FTX | I2C_CR_FRX)) == 0)
- return 0;
+ return 0;
}
}
- dev_err(&dev->adev->dev,
+ dev_err(&priv->adev->dev,
"flushing operation timed out giving up after %d attempts",
LOOP_ATTEMPTS);
@@ -245,45 +245,45 @@ static int flush_i2c_fifo(struct nmk_i2c_dev *dev)
/**
* disable_all_interrupts() - Disable all interrupts of this I2c Bus
- * @dev: private data of I2C Driver
+ * @priv: private data of I2C Driver
*/
-static void disable_all_interrupts(struct nmk_i2c_dev *dev)
+static void disable_all_interrupts(struct nmk_i2c_dev *priv)
{
u32 mask = IRQ_MASK(0);
- writel(mask, dev->virtbase + I2C_IMSCR);
+ writel(mask, priv->virtbase + I2C_IMSCR);
}
/**
* clear_all_interrupts() - Clear all interrupts of I2C Controller
- * @dev: private data of I2C Driver
+ * @priv: private data of I2C Driver
*/
-static void clear_all_interrupts(struct nmk_i2c_dev *dev)
+static void clear_all_interrupts(struct nmk_i2c_dev *priv)
{
u32 mask;
mask = IRQ_MASK(I2C_CLEAR_ALL_INTS);
- writel(mask, dev->virtbase + I2C_ICR);
+ writel(mask, priv->virtbase + I2C_ICR);
}
/**
* init_hw() - initialize the I2C hardware
- * @dev: private data of I2C Driver
+ * @priv: private data of I2C Driver
*/
-static int init_hw(struct nmk_i2c_dev *dev)
+static int init_hw(struct nmk_i2c_dev *priv)
{
int stat;
- stat = flush_i2c_fifo(dev);
+ stat = flush_i2c_fifo(priv);
if (stat)
goto exit;
/* disable the controller */
- i2c_clr_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
+ i2c_clr_bit(priv->virtbase + I2C_CR, I2C_CR_PE);
- disable_all_interrupts(dev);
+ disable_all_interrupts(priv);
- clear_all_interrupts(dev);
+ clear_all_interrupts(priv);
- dev->cli.operation = I2C_NO_OPERATION;
+ priv->cli.operation = I2C_NO_OPERATION;
exit:
return stat;
@@ -294,15 +294,15 @@ static int init_hw(struct nmk_i2c_dev *dev)
/**
* load_i2c_mcr_reg() - load the MCR register
- * @dev: private data of controller
+ * @priv: private data of controller
* @flags: message flags
*/
-static u32 load_i2c_mcr_reg(struct nmk_i2c_dev *dev, u16 flags)
+static u32 load_i2c_mcr_reg(struct nmk_i2c_dev *priv, u16 flags)
{
u32 mcr = 0;
unsigned short slave_adr_3msb_bits;
- mcr |= GEN_MASK(dev->cli.slave_adr, I2C_MCR_A7, 1);
+ mcr |= GEN_MASK(priv->cli.slave_adr, I2C_MCR_A7, 1);
if (unlikely(flags & I2C_M_TEN)) {
/* 10-bit address transaction */
@@ -313,7 +313,7 @@ static u32 load_i2c_mcr_reg(struct nmk_i2c_dev *dev, u16 flags)
* the extension (MSB bits) of the 7 bit address loaded
* in A7
*/
- slave_adr_3msb_bits = (dev->cli.slave_adr >> 7) & 0x7;
+ slave_adr_3msb_bits = (priv->cli.slave_adr >> 7) & 0x7;
mcr |= GEN_MASK(slave_adr_3msb_bits, I2C_MCR_EA10, 8);
} else {
@@ -325,40 +325,40 @@ static u32 load_i2c_mcr_reg(struct nmk_i2c_dev *dev, u16 flags)
mcr |= GEN_MASK(0, I2C_MCR_SB, 11);
/* check the operation, master read/write? */
- if (dev->cli.operation == I2C_WRITE)
+ if (priv->cli.operation == I2C_WRITE)
mcr |= GEN_MASK(I2C_WRITE, I2C_MCR_OP, 0);
else
mcr |= GEN_MASK(I2C_READ, I2C_MCR_OP, 0);
/* stop or repeated start? */
- if (dev->stop)
+ if (priv->stop)
mcr |= GEN_MASK(1, I2C_MCR_STOP, 14);
else
mcr &= ~(GEN_MASK(1, I2C_MCR_STOP, 14));
- mcr |= GEN_MASK(dev->cli.count, I2C_MCR_LENGTH, 15);
+ mcr |= GEN_MASK(priv->cli.count, I2C_MCR_LENGTH, 15);
return mcr;
}
/**
* setup_i2c_controller() - setup the controller
- * @dev: private data of controller
+ * @priv: private data of controller
*/
-static void setup_i2c_controller(struct nmk_i2c_dev *dev)
+static void setup_i2c_controller(struct nmk_i2c_dev *priv)
{
u32 brcr1, brcr2;
u32 i2c_clk, div;
u32 ns;
u16 slsu;
- writel(0x0, dev->virtbase + I2C_CR);
- writel(0x0, dev->virtbase + I2C_HSMCR);
- writel(0x0, dev->virtbase + I2C_TFTR);
- writel(0x0, dev->virtbase + I2C_RFTR);
- writel(0x0, dev->virtbase + I2C_DMAR);
+ writel(0x0, priv->virtbase + I2C_CR);
+ writel(0x0, priv->virtbase + I2C_HSMCR);
+ writel(0x0, priv->virtbase + I2C_TFTR);
+ writel(0x0, priv->virtbase + I2C_RFTR);
+ writel(0x0, priv->virtbase + I2C_DMAR);
- i2c_clk = clk_get_rate(dev->clk);
+ i2c_clk = clk_get_rate(priv->clk);
/*
* set the slsu:
@@ -373,7 +373,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
* slsu = cycles / (1000000000 / f) + 1
*/
ns = DIV_ROUND_UP_ULL(1000000000ULL, i2c_clk);
- switch (dev->sm) {
+ switch (priv->sm) {
case I2C_FREQ_MODE_FAST:
case I2C_FREQ_MODE_FAST_PLUS:
slsu = DIV_ROUND_UP(100, ns); /* Fast */
@@ -388,15 +388,15 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
}
slsu += 1;
- dev_dbg(&dev->adev->dev, "calculated SLSU = %04x\n", slsu);
- writel(slsu << 16, dev->virtbase + I2C_SCR);
+ dev_dbg(&priv->adev->dev, "calculated SLSU = %04x\n", slsu);
+ writel(slsu << 16, priv->virtbase + I2C_SCR);
/*
* The spec says, in case of std. mode the divider is
* 2 whereas it is 3 for fast and fastplus mode of
* operation. TODO - high speed support.
*/
- div = (dev->clk_freq > I2C_MAX_STANDARD_MODE_FREQ) ? 3 : 2;
+ div = (priv->clk_freq > I2C_MAX_STANDARD_MODE_FREQ) ? 3 : 2;
/*
* generate the mask for baud rate counters. The controller
@@ -406,10 +406,10 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
* so set brcr1 to 0.
*/
brcr1 = 0 << 16;
- brcr2 = (i2c_clk/(dev->clk_freq * div)) & 0xffff;
+ brcr2 = (i2c_clk / (priv->clk_freq * div)) & 0xffff;
/* set the baud rate counter register */
- writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
+ writel((brcr1 | brcr2), priv->virtbase + I2C_BRCR);
/*
* set the speed mode. Currently we support
@@ -417,125 +417,124 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
* TODO - support for fast mode plus (up to 1Mb/s)
* and high speed (up to 3.4 Mb/s)
*/
- if (dev->sm > I2C_FREQ_MODE_FAST) {
- dev_err(&dev->adev->dev,
+ if (priv->sm > I2C_FREQ_MODE_FAST) {
+ dev_err(&priv->adev->dev,
"do not support this mode defaulting to std. mode\n");
brcr2 = i2c_clk / (I2C_MAX_STANDARD_MODE_FREQ * 2) & 0xffff;
- writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
+ writel((brcr1 | brcr2), priv->virtbase + I2C_BRCR);
writel(I2C_FREQ_MODE_STANDARD << 4,
- dev->virtbase + I2C_CR);
+ priv->virtbase + I2C_CR);
}
- writel(dev->sm << 4, dev->virtbase + I2C_CR);
+ writel(priv->sm << 4, priv->virtbase + I2C_CR);
/* set the Tx and Rx FIFO threshold */
- writel(dev->tft, dev->virtbase + I2C_TFTR);
- writel(dev->rft, dev->virtbase + I2C_RFTR);
+ writel(priv->tft, priv->virtbase + I2C_TFTR);
+ writel(priv->rft, priv->virtbase + I2C_RFTR);
}
/**
* read_i2c() - Read from I2C client device
- * @dev: private data of I2C Driver
+ * @priv: private data of I2C Driver
* @flags: message flags
*
* This function reads from i2c client device when controller is in
* master mode. There is a completion timeout. If there is no transfer
* before timeout error is returned.
*/
-static int read_i2c(struct nmk_i2c_dev *dev, u16 flags)
+static int read_i2c(struct nmk_i2c_dev *priv, u16 flags)
{
int status = 0;
u32 mcr, irq_mask;
unsigned long timeout;
- mcr = load_i2c_mcr_reg(dev, flags);
- writel(mcr, dev->virtbase + I2C_MCR);
+ mcr = load_i2c_mcr_reg(priv, flags);
+ writel(mcr, priv->virtbase + I2C_MCR);
/* load the current CR value */
- writel(readl(dev->virtbase + I2C_CR) | DEFAULT_I2C_REG_CR,
- dev->virtbase + I2C_CR);
+ writel(readl(priv->virtbase + I2C_CR) | DEFAULT_I2C_REG_CR,
+ priv->virtbase + I2C_CR);
/* enable the controller */
- i2c_set_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
+ i2c_set_bit(priv->virtbase + I2C_CR, I2C_CR_PE);
- init_completion(&dev->xfer_complete);
+ init_completion(&priv->xfer_complete);
/* enable interrupts by setting the mask */
irq_mask = (I2C_IT_RXFNF | I2C_IT_RXFF |
I2C_IT_MAL | I2C_IT_BERR);
- if (dev->stop || !dev->vendor->has_mtdws)
+ if (priv->stop || !priv->vendor->has_mtdws)
irq_mask |= I2C_IT_MTD;
else
irq_mask |= I2C_IT_MTDWS;
irq_mask = I2C_CLEAR_ALL_INTS & IRQ_MASK(irq_mask);
- writel(readl(dev->virtbase + I2C_IMSCR) | irq_mask,
- dev->virtbase + I2C_IMSCR);
+ writel(readl(priv->virtbase + I2C_IMSCR) | irq_mask,
+ priv->virtbase + I2C_IMSCR);
timeout = wait_for_completion_timeout(
- &dev->xfer_complete, dev->adap.timeout);
+ &priv->xfer_complete, priv->adap.timeout);
if (timeout == 0) {
/* Controller timed out */
- dev_err(&dev->adev->dev, "read from slave 0x%x timed out\n",
- dev->cli.slave_adr);
+ dev_err(&priv->adev->dev, "read from slave 0x%x timed out\n",
+ priv->cli.slave_adr);
status = -ETIMEDOUT;
}
return status;
}
-static void fill_tx_fifo(struct nmk_i2c_dev *dev, int no_bytes)
+static void fill_tx_fifo(struct nmk_i2c_dev *priv, int no_bytes)
{
int count;
for (count = (no_bytes - 2);
(count > 0) &&
- (dev->cli.count != 0);
+ (priv->cli.count != 0);
count--) {
/* write to the Tx FIFO */
- writeb(*dev->cli.buffer,
- dev->virtbase + I2C_TFR);
- dev->cli.buffer++;
- dev->cli.count--;
- dev->cli.xfer_bytes++;
+ writeb(*priv->cli.buffer, priv->virtbase + I2C_TFR);
+ priv->cli.buffer++;
+ priv->cli.count--;
+ priv->cli.xfer_bytes++;
}
}
/**
* write_i2c() - Write data to I2C client.
- * @dev: private data of I2C Driver
+ * @priv: private data of I2C Driver
* @flags: message flags
*
* This function writes data to I2C client
*/
-static int write_i2c(struct nmk_i2c_dev *dev, u16 flags)
+static int write_i2c(struct nmk_i2c_dev *priv, u16 flags)
{
u32 status = 0;
u32 mcr, irq_mask;
unsigned long timeout;
- mcr = load_i2c_mcr_reg(dev, flags);
+ mcr = load_i2c_mcr_reg(priv, flags);
- writel(mcr, dev->virtbase + I2C_MCR);
+ writel(mcr, priv->virtbase + I2C_MCR);
/* load the current CR value */
- writel(readl(dev->virtbase + I2C_CR) | DEFAULT_I2C_REG_CR,
- dev->virtbase + I2C_CR);
+ writel(readl(priv->virtbase + I2C_CR) | DEFAULT_I2C_REG_CR,
+ priv->virtbase + I2C_CR);
/* enable the controller */
- i2c_set_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
+ i2c_set_bit(priv->virtbase + I2C_CR, I2C_CR_PE);
- init_completion(&dev->xfer_complete);
+ init_completion(&priv->xfer_complete);
/* enable interrupts by settings the masks */
irq_mask = (I2C_IT_TXFOVR | I2C_IT_MAL | I2C_IT_BERR);
/* Fill the TX FIFO with transmit data */
- fill_tx_fifo(dev, MAX_I2C_FIFO_THRESHOLD);
+ fill_tx_fifo(priv, MAX_I2C_FIFO_THRESHOLD);
- if (dev->cli.count != 0)
+ if (priv->cli.count != 0)
irq_mask |= I2C_IT_TXFNE;
/*
@@ -543,23 +542,23 @@ static int write_i2c(struct nmk_i2c_dev *dev, u16 flags)
* set the MTDWS bit (Master Transaction Done Without Stop)
* to start repeated start operation
*/
- if (dev->stop || !dev->vendor->has_mtdws)
+ if (priv->stop || !priv->vendor->has_mtdws)
irq_mask |= I2C_IT_MTD;
else
irq_mask |= I2C_IT_MTDWS;
irq_mask = I2C_CLEAR_ALL_INTS & IRQ_MASK(irq_mask);
- writel(readl(dev->virtbase + I2C_IMSCR) | irq_mask,
- dev->virtbase + I2C_IMSCR);
+ writel(readl(priv->virtbase + I2C_IMSCR) | irq_mask,
+ priv->virtbase + I2C_IMSCR);
timeout = wait_for_completion_timeout(
- &dev->xfer_complete, dev->adap.timeout);
+ &priv->xfer_complete, priv->adap.timeout);
if (timeout == 0) {
/* Controller timed out */
- dev_err(&dev->adev->dev, "write to slave 0x%x timed out\n",
- dev->cli.slave_adr);
+ dev_err(&priv->adev->dev, "write to slave 0x%x timed out\n",
+ priv->cli.slave_adr);
status = -ETIMEDOUT;
}
@@ -568,28 +567,28 @@ static int write_i2c(struct nmk_i2c_dev *dev, u16 flags)
/**
* nmk_i2c_xfer_one() - transmit a single I2C message
- * @dev: device with a message encoded into it
+ * @priv: device with a message encoded into it
* @flags: message flags
*/
-static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
+static int nmk_i2c_xfer_one(struct nmk_i2c_dev *priv, u16 flags)
{
int status;
if (flags & I2C_M_RD) {
/* read operation */
- dev->cli.operation = I2C_READ;
- status = read_i2c(dev, flags);
+ priv->cli.operation = I2C_READ;
+ status = read_i2c(priv, flags);
} else {
/* write operation */
- dev->cli.operation = I2C_WRITE;
- status = write_i2c(dev, flags);
+ priv->cli.operation = I2C_WRITE;
+ status = write_i2c(priv, flags);
}
- if (status || (dev->result)) {
+ if (status || priv->result) {
u32 i2c_sr;
u32 cause;
- i2c_sr = readl(dev->virtbase + I2C_SR);
+ i2c_sr = readl(priv->virtbase + I2C_SR);
/*
* Check if the controller I2C operation status
* is set to ABORT(11b).
@@ -597,15 +596,15 @@ static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
if (((i2c_sr >> 2) & 0x3) == 0x3) {
/* get the abort cause */
cause = (i2c_sr >> 4) & 0x7;
- dev_err(&dev->adev->dev, "%s\n",
+ dev_err(&priv->adev->dev, "%s\n",
cause >= ARRAY_SIZE(abort_causes) ?
"unknown reason" :
abort_causes[cause]);
}
- (void) init_hw(dev);
+ init_hw(priv);
- status = status ? status : dev->result;
+ status = status ? status : priv->result;
}
return status;
@@ -663,24 +662,24 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
{
int status = 0;
int i;
- struct nmk_i2c_dev *dev = i2c_get_adapdata(i2c_adap);
+ struct nmk_i2c_dev *priv = i2c_get_adapdata(i2c_adap);
int j;
- pm_runtime_get_sync(&dev->adev->dev);
+ pm_runtime_get_sync(&priv->adev->dev);
/* Attempt three times to send the message queue */
for (j = 0; j < 3; j++) {
/* setup the i2c controller */
- setup_i2c_controller(dev);
+ setup_i2c_controller(priv);
for (i = 0; i < num_msgs; i++) {
- dev->cli.slave_adr = msgs[i].addr;
- dev->cli.buffer = msgs[i].buf;
- dev->cli.count = msgs[i].len;
- dev->stop = (i < (num_msgs - 1)) ? 0 : 1;
- dev->result = 0;
+ priv->cli.slave_adr = msgs[i].addr;
+ priv->cli.buffer = msgs[i].buf;
+ priv->cli.count = msgs[i].len;
+ priv->stop = (i < (num_msgs - 1)) ? 0 : 1;
+ priv->result = 0;
- status = nmk_i2c_xfer_one(dev, msgs[i].flags);
+ status = nmk_i2c_xfer_one(priv, msgs[i].flags);
if (status != 0)
break;
}
@@ -688,7 +687,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
break;
}
- pm_runtime_put_sync(&dev->adev->dev);
+ pm_runtime_put_sync(&priv->adev->dev);
/* return the no. messages processed */
if (status)
@@ -699,14 +698,14 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
/**
* disable_interrupts() - disable the interrupts
- * @dev: private data of controller
+ * @priv: private data of controller
* @irq: interrupt number
*/
-static int disable_interrupts(struct nmk_i2c_dev *dev, u32 irq)
+static int disable_interrupts(struct nmk_i2c_dev *priv, u32 irq)
{
irq = IRQ_MASK(irq);
- writel(readl(dev->virtbase + I2C_IMSCR) & ~(I2C_CLEAR_ALL_INTS & irq),
- dev->virtbase + I2C_IMSCR);
+ writel(readl(priv->virtbase + I2C_IMSCR) & ~(I2C_CLEAR_ALL_INTS & irq),
+ priv->virtbase + I2C_IMSCR);
return 0;
}
@@ -723,17 +722,18 @@ static int disable_interrupts(struct nmk_i2c_dev *dev, u32 irq)
*/
static irqreturn_t i2c_irq_handler(int irq, void *arg)
{
- struct nmk_i2c_dev *dev = arg;
+ struct nmk_i2c_dev *priv = arg;
+ struct device *dev = &priv->adev->dev;
u32 tft, rft;
u32 count;
u32 misr, src;
/* load Tx FIFO and Rx FIFO threshold values */
- tft = readl(dev->virtbase + I2C_TFTR);
- rft = readl(dev->virtbase + I2C_RFTR);
+ tft = readl(priv->virtbase + I2C_TFTR);
+ rft = readl(priv->virtbase + I2C_RFTR);
/* read interrupt status register */
- misr = readl(dev->virtbase + I2C_MISR);
+ misr = readl(priv->virtbase + I2C_MISR);
src = __ffs(misr);
switch ((1 << src)) {
@@ -741,20 +741,20 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
/* Transmit FIFO nearly empty interrupt */
case I2C_IT_TXFNE:
{
- if (dev->cli.operation == I2C_READ) {
+ if (priv->cli.operation == I2C_READ) {
/*
* in read operation why do we care for writing?
* so disable the Transmit FIFO interrupt
*/
- disable_interrupts(dev, I2C_IT_TXFNE);
+ disable_interrupts(priv, I2C_IT_TXFNE);
} else {
- fill_tx_fifo(dev, (MAX_I2C_FIFO_THRESHOLD - tft));
+ fill_tx_fifo(priv, (MAX_I2C_FIFO_THRESHOLD - tft));
/*
* if done, close the transfer by disabling the
* corresponding TXFNE interrupt
*/
- if (dev->cli.count == 0)
- disable_interrupts(dev, I2C_IT_TXFNE);
+ if (priv->cli.count == 0)
+ disable_interrupts(priv, I2C_IT_TXFNE);
}
}
break;
@@ -768,60 +768,59 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
case I2C_IT_RXFNF:
for (count = rft; count > 0; count--) {
/* Read the Rx FIFO */
- *dev->cli.buffer = readb(dev->virtbase + I2C_RFR);
- dev->cli.buffer++;
+ *priv->cli.buffer = readb(priv->virtbase + I2C_RFR);
+ priv->cli.buffer++;
}
- dev->cli.count -= rft;
- dev->cli.xfer_bytes += rft;
+ priv->cli.count -= rft;
+ priv->cli.xfer_bytes += rft;
break;
/* Rx FIFO full */
case I2C_IT_RXFF:
for (count = MAX_I2C_FIFO_THRESHOLD; count > 0; count--) {
- *dev->cli.buffer = readb(dev->virtbase + I2C_RFR);
- dev->cli.buffer++;
+ *priv->cli.buffer = readb(priv->virtbase + I2C_RFR);
+ priv->cli.buffer++;
}
- dev->cli.count -= MAX_I2C_FIFO_THRESHOLD;
- dev->cli.xfer_bytes += MAX_I2C_FIFO_THRESHOLD;
+ priv->cli.count -= MAX_I2C_FIFO_THRESHOLD;
+ priv->cli.xfer_bytes += MAX_I2C_FIFO_THRESHOLD;
break;
/* Master Transaction Done with/without stop */
case I2C_IT_MTD:
case I2C_IT_MTDWS:
- if (dev->cli.operation == I2C_READ) {
- while (!(readl(dev->virtbase + I2C_RISR)
+ if (priv->cli.operation == I2C_READ) {
+ while (!(readl(priv->virtbase + I2C_RISR)
& I2C_IT_RXFE)) {
- if (dev->cli.count == 0)
+ if (priv->cli.count == 0)
break;
- *dev->cli.buffer =
- readb(dev->virtbase + I2C_RFR);
- dev->cli.buffer++;
- dev->cli.count--;
- dev->cli.xfer_bytes++;
+ *priv->cli.buffer =
+ readb(priv->virtbase + I2C_RFR);
+ priv->cli.buffer++;
+ priv->cli.count--;
+ priv->cli.xfer_bytes++;
}
}
- disable_all_interrupts(dev);
- clear_all_interrupts(dev);
+ disable_all_interrupts(priv);
+ clear_all_interrupts(priv);
- if (dev->cli.count) {
- dev->result = -EIO;
- dev_err(&dev->adev->dev,
- "%lu bytes still remain to be xfered\n",
- dev->cli.count);
- (void) init_hw(dev);
+ if (priv->cli.count) {
+ priv->result = -EIO;
+ dev_err(dev, "%lu bytes still remain to be xfered\n",
+ priv->cli.count);
+ init_hw(priv);
}
- complete(&dev->xfer_complete);
+ complete(&priv->xfer_complete);
break;
/* Master Arbitration lost interrupt */
case I2C_IT_MAL:
- dev->result = -EIO;
- (void) init_hw(dev);
+ priv->result = -EIO;
+ init_hw(priv);
- i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MAL);
- complete(&dev->xfer_complete);
+ i2c_set_bit(priv->virtbase + I2C_ICR, I2C_IT_MAL);
+ complete(&priv->xfer_complete);
break;
@@ -831,13 +830,13 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
* during the transaction.
*/
case I2C_IT_BERR:
- dev->result = -EIO;
+ priv->result = -EIO;
/* get the status */
- if (((readl(dev->virtbase + I2C_SR) >> 2) & 0x3) == I2C_ABORT)
- (void) init_hw(dev);
+ if (((readl(priv->virtbase + I2C_SR) >> 2) & 0x3) == I2C_ABORT)
+ init_hw(priv);
- i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_BERR);
- complete(&dev->xfer_complete);
+ i2c_set_bit(priv->virtbase + I2C_ICR, I2C_IT_BERR);
+ complete(&priv->xfer_complete);
break;
@@ -847,11 +846,11 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
* the Tx FIFO is full.
*/
case I2C_IT_TXFOVR:
- dev->result = -EIO;
- (void) init_hw(dev);
+ priv->result = -EIO;
+ init_hw(priv);
- dev_err(&dev->adev->dev, "Tx Fifo Over run\n");
- complete(&dev->xfer_complete);
+ dev_err(dev, "Tx Fifo Over run\n");
+ complete(&priv->xfer_complete);
break;
@@ -863,10 +862,10 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
case I2C_IT_RFSE:
case I2C_IT_WTSR:
case I2C_IT_STD:
- dev_err(&dev->adev->dev, "unhandled Interrupt\n");
+ dev_err(dev, "unhandled Interrupt\n");
break;
default:
- dev_err(&dev->adev->dev, "spurious Interrupt..\n");
+ dev_err(dev, "spurious Interrupt..\n");
break;
}
@@ -893,9 +892,9 @@ static int nmk_i2c_resume_early(struct device *dev)
static int nmk_i2c_runtime_suspend(struct device *dev)
{
struct amba_device *adev = to_amba_device(dev);
- struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
+ struct nmk_i2c_dev *priv = amba_get_drvdata(adev);
- clk_disable_unprepare(nmk_i2c->clk);
+ clk_disable_unprepare(priv->clk);
pinctrl_pm_select_idle_state(dev);
return 0;
}
@@ -903,10 +902,10 @@ static int nmk_i2c_runtime_suspend(struct device *dev)
static int nmk_i2c_runtime_resume(struct device *dev)
{
struct amba_device *adev = to_amba_device(dev);
- struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
+ struct nmk_i2c_dev *priv = amba_get_drvdata(adev);
int ret;
- ret = clk_prepare_enable(nmk_i2c->clk);
+ ret = clk_prepare_enable(priv->clk);
if (ret) {
dev_err(dev, "can't prepare_enable clock\n");
return ret;
@@ -914,9 +913,9 @@ static int nmk_i2c_runtime_resume(struct device *dev)
pinctrl_pm_select_default_state(dev);
- ret = init_hw(nmk_i2c);
+ ret = init_hw(priv);
if (ret) {
- clk_disable_unprepare(nmk_i2c->clk);
+ clk_disable_unprepare(priv->clk);
pinctrl_pm_select_idle_state(dev);
}
@@ -939,107 +938,108 @@ static const struct i2c_algorithm nmk_i2c_algo = {
};
static void nmk_i2c_of_probe(struct device_node *np,
- struct nmk_i2c_dev *nmk)
+ struct nmk_i2c_dev *priv)
{
/* Default to 100 kHz if no frequency is given in the node */
- if (of_property_read_u32(np, "clock-frequency", &nmk->clk_freq))
- nmk->clk_freq = I2C_MAX_STANDARD_MODE_FREQ;
+ if (of_property_read_u32(np, "clock-frequency", &priv->clk_freq))
+ priv->clk_freq = I2C_MAX_STANDARD_MODE_FREQ;
/* This driver only supports 'standard' and 'fast' modes of operation. */
- if (nmk->clk_freq <= I2C_MAX_STANDARD_MODE_FREQ)
- nmk->sm = I2C_FREQ_MODE_STANDARD;
+ if (priv->clk_freq <= I2C_MAX_STANDARD_MODE_FREQ)
+ priv->sm = I2C_FREQ_MODE_STANDARD;
else
- nmk->sm = I2C_FREQ_MODE_FAST;
- nmk->tft = 1; /* Tx FIFO threshold */
- nmk->rft = 8; /* Rx FIFO threshold */
- nmk->timeout = 200; /* Slave response timeout(ms) */
+ priv->sm = I2C_FREQ_MODE_FAST;
+ priv->tft = 1; /* Tx FIFO threshold */
+ priv->rft = 8; /* Rx FIFO threshold */
+ priv->timeout = 200; /* Slave response timeout(ms) */
}
static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
{
int ret = 0;
+ struct nmk_i2c_dev *priv;
struct device_node *np = adev->dev.of_node;
- struct nmk_i2c_dev *dev;
+ struct device *dev = &adev->dev;
struct i2c_adapter *adap;
struct i2c_vendor_data *vendor = id->data;
u32 max_fifo_threshold = (vendor->fifodepth / 2) - 1;
- dev = devm_kzalloc(&adev->dev, sizeof(*dev), GFP_KERNEL);
- if (!dev)
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
return -ENOMEM;
- dev->vendor = vendor;
- dev->adev = adev;
- nmk_i2c_of_probe(np, dev);
+ priv->vendor = vendor;
+ priv->adev = adev;
+ nmk_i2c_of_probe(np, priv);
- if (dev->tft > max_fifo_threshold) {
- dev_warn(&adev->dev, "requested TX FIFO threshold %u, adjusted down to %u\n",
- dev->tft, max_fifo_threshold);
- dev->tft = max_fifo_threshold;
+ if (priv->tft > max_fifo_threshold) {
+ dev_warn(dev, "requested TX FIFO threshold %u, adjusted down to %u\n",
+ priv->tft, max_fifo_threshold);
+ priv->tft = max_fifo_threshold;
}
- if (dev->rft > max_fifo_threshold) {
- dev_warn(&adev->dev, "requested RX FIFO threshold %u, adjusted down to %u\n",
- dev->rft, max_fifo_threshold);
- dev->rft = max_fifo_threshold;
+ if (priv->rft > max_fifo_threshold) {
+ dev_warn(dev, "requested RX FIFO threshold %u, adjusted down to %u\n",
+ priv->rft, max_fifo_threshold);
+ priv->rft = max_fifo_threshold;
}
- amba_set_drvdata(adev, dev);
+ amba_set_drvdata(adev, priv);
- dev->virtbase = devm_ioremap(&adev->dev, adev->res.start,
- resource_size(&adev->res));
- if (!dev->virtbase)
+ priv->virtbase = devm_ioremap(dev, adev->res.start,
+ resource_size(&adev->res));
+ if (!priv->virtbase)
return -ENOMEM;
- dev->irq = adev->irq[0];
- ret = devm_request_irq(&adev->dev, dev->irq, i2c_irq_handler, 0,
- DRIVER_NAME, dev);
+ priv->irq = adev->irq[0];
+ ret = devm_request_irq(dev, priv->irq, i2c_irq_handler, 0,
+ DRIVER_NAME, priv);
if (ret)
- return dev_err_probe(&adev->dev, ret,
- "cannot claim the irq %d\n", dev->irq);
+ return dev_err_probe(dev, ret,
+ "cannot claim the irq %d\n", priv->irq);
- dev->clk = devm_clk_get_enabled(&adev->dev, NULL);
- if (IS_ERR(dev->clk))
- return dev_err_probe(&adev->dev, PTR_ERR(dev->clk),
+ priv->clk = devm_clk_get_enabled(dev, NULL);
+ if (IS_ERR(priv->clk))
+ return dev_err_probe(dev, PTR_ERR(priv->clk),
"could enable i2c clock\n");
- init_hw(dev);
+ init_hw(priv);
- adap = &dev->adap;
+ adap = &priv->adap;
adap->dev.of_node = np;
- adap->dev.parent = &adev->dev;
+ adap->dev.parent = dev;
adap->owner = THIS_MODULE;
adap->class = I2C_CLASS_DEPRECATED;
adap->algo = &nmk_i2c_algo;
- adap->timeout = msecs_to_jiffies(dev->timeout);
+ adap->timeout = msecs_to_jiffies(priv->timeout);
snprintf(adap->name, sizeof(adap->name),
"Nomadik I2C at %pR", &adev->res);
- i2c_set_adapdata(adap, dev);
+ i2c_set_adapdata(adap, priv);
- dev_info(&adev->dev,
+ dev_info(dev,
"initialize %s on virtual base %p\n",
- adap->name, dev->virtbase);
+ adap->name, priv->virtbase);
ret = i2c_add_adapter(adap);
if (ret)
return ret;
- pm_runtime_put(&adev->dev);
+ pm_runtime_put(dev);
return 0;
}
static void nmk_i2c_remove(struct amba_device *adev)
{
- struct nmk_i2c_dev *dev = amba_get_drvdata(adev);
+ struct nmk_i2c_dev *priv = amba_get_drvdata(adev);
- i2c_del_adapter(&dev->adap);
- flush_i2c_fifo(dev);
- disable_all_interrupts(dev);
- clear_all_interrupts(dev);
+ i2c_del_adapter(&priv->adap);
+ flush_i2c_fifo(priv);
+ disable_all_interrupts(priv);
+ clear_all_interrupts(priv);
/* disable the controller */
- i2c_clr_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
+ i2c_clr_bit(priv->virtbase + I2C_CR, I2C_CR_PE);
}
static struct i2c_vendor_data vendor_stn8815 = {
--
2.43.1
Powered by blists - more mailing lists