[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240215212852.1202339-1-m.felsch@pengutronix.de>
Date: Thu, 15 Feb 2024 22:28:48 +0100
From: Marco Felsch <m.felsch@...gutronix.de>
To: gregkh@...uxfoundation.org,
robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org,
linux@...ck-us.net,
heikki.krogerus@...ux.intel.com,
jun.li@....com
Cc: linux-usb@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
kernel@...gutronix.de
Subject: [PATCH v2 0/4] USB-C TCPM Orientation Support
Hi,
this adds the support to controll the optional connector-orientation
available on some TCPC from the TCPM.
I used an custom board with OnSemi FUSB307B TCPC which is spec [1]
compatible but albeit the spec [1] says that this pin is controlled by
the TCPC if 'TCPC_CONTROL.DebugAccessoryControl = 0' it isn't at least
for this device.
I'm unsure if the usb tcpci spec has an copy'n'paste failure since
'TCPC_CONTROL.DebugAccessoryControl' shouldn't control the state of the
'connector orientation' pin or if the OnSemi FUSB307B has an HW bug.
Since on my device the 'TCPC_CONTROL.DebugAccessoryControl' is set to
0 but the register wasn't updated automatically.
Regards,
Marco
[1] https://www.usb.org/sites/default/files/documents/usb-port_controller_specification_rev2.0_v1.0_0.pdf
Marco Felsch (4):
dt-bindings: usb: typec-tcpci: add tcpci fallback binding
usb: typec: tcpci: add generic tcpci fallback compatible
usb: typec: tcpm: add support to set tcpc connector orientatition
usb: typec: tcpci: add support to set connector orientation
.../devicetree/bindings/usb/nxp,ptn5110.yaml | 4 +-
drivers/usb/typec/tcpm/tcpci.c | 45 +++++++++++++++++++
drivers/usb/typec/tcpm/tcpm.c | 6 +++
include/linux/usb/tcpci.h | 8 ++++
include/linux/usb/tcpm.h | 2 +
5 files changed, 64 insertions(+), 1 deletion(-)
--
2.39.2
Powered by blists - more mailing lists