[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240215220759.976998-8-eajames@linux.ibm.com>
Date: Thu, 15 Feb 2024 16:07:33 -0600
From: Eddie James <eajames@...ux.ibm.com>
To: linux-fsi@...ts.ozlabs.org
Cc: linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org,
linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
andi.shyti@...nel.org, eajames@...ux.ibm.com, alistair@...ple.id.au,
joel@....id.au, jk@...abs.org, sboyd@...nel.org,
mturquette@...libre.com, robh@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org
Subject: [PATCH 07/33] ARM: dts: aspeed: p10 and tacoma: Set FSI clock frequency
Now that the driver doesn't hardcode the clock divider, set it
in the device tree.
Signed-off-by: Eddie James <eajames@...ux.ibm.com>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 1 +
arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
index 213023bc5aec..96a8f727bc38 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -193,6 +193,7 @@ &fsim0 {
#address-cells = <2>;
#size-cells = <0>;
+ clock-frequency = <100000000>;
fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
index cc466910bb52..a93a241d005a 100644
--- a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
@@ -8,6 +8,7 @@ &fsim0 {
#size-cells = <0>;
cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+ clock-frequency = <100000000>;
cfam@0,0 {
reg = <0 0>;
--
2.39.3
Powered by blists - more mailing lists