| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240215234920.iz62rjm2w54plesz@synopsys.com>
Date: Thu, 15 Feb 2024 23:49:24 +0000
From: Thinh Nguyen <Thinh.Nguyen@...opsys.com>
To: Krishna Kurapati <quic_kriskura@...cinc.com>
CC: Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Wesley Cheng <quic_wcheng@...cinc.com>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Conor Dooley <conor+dt@...nel.org>,
Thinh Nguyen <Thinh.Nguyen@...opsys.com>,
Felipe Balbi <balbi@...nel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-msm@...r.kernel.org" <linux-arm-msm@...r.kernel.org>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"quic_ppratap@...cinc.com" <quic_ppratap@...cinc.com>,
"quic_jackp@...cinc.com" <quic_jackp@...cinc.com>
Subject: Re: [PATCH v14 8/9] usb: dwc3: qcom: Enable wakeup for applicable
ports of multiport
On Tue, Feb 06, 2024, Krishna Kurapati wrote:
> DWC3 Qcom wrapper currently supports only wakeup configuration
> for single port controllers. Read speed of each port connected
> to the controller and enable wakeup for each of them accordingly.
>
> Signed-off-by: Krishna Kurapati <quic_kriskura@...cinc.com>
> ---
> drivers/usb/dwc3/dwc3-qcom.c | 72 ++++++++++++++++++------------------
> 1 file changed, 37 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index a20d63a791bd..572dc3fdae12 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -78,6 +78,7 @@ struct dwc3_qcom_port {
> int dp_hs_phy_irq;
> int dm_hs_phy_irq;
> int ss_phy_irq;
> + enum usb_device_speed usb2_speed;
> };
>
> struct dwc3_qcom {
> @@ -336,7 +337,8 @@ static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom)
> return dwc->xhci;
> }
>
> -static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom)
> +static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom,
> + int port_index)
> {
> struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
> struct usb_device *udev;
> @@ -347,14 +349,8 @@ static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom)
> */
> hcd = platform_get_drvdata(dwc->xhci);
>
> - /*
> - * It is possible to query the speed of all children of
> - * USB2.0 root hub via usb_hub_for_each_child(). DWC3 code
> - * currently supports only 1 port per controller. So
> - * this is sufficient.
> - */
> #ifdef CONFIG_USB
> - udev = usb_hub_find_child(hcd->self.root_hub, 1);
> + udev = usb_hub_find_child(hcd->self.root_hub, port_index + 1);
> #else
> udev = NULL;
> #endif
> @@ -387,23 +383,29 @@ static void dwc3_qcom_disable_wakeup_irq(int irq)
>
> static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
> {
> + int i;
> +
> dwc3_qcom_disable_wakeup_irq(qcom->qusb2_phy_irq);
>
> - if (qcom->usb2_speed == USB_SPEED_LOW) {
> - dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].dm_hs_phy_irq);
> - } else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
> - (qcom->usb2_speed == USB_SPEED_FULL)) {
> - dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].dp_hs_phy_irq);
> - } else {
> - dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].dp_hs_phy_irq);
> - dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].dm_hs_phy_irq);
> - }
> + for (i = 0; i < qcom->num_ports; i++) {
> + if (qcom->port_info[i].usb2_speed == USB_SPEED_LOW) {
> + dwc3_qcom_disable_wakeup_irq(qcom->port_info[i].dm_hs_phy_irq);
> + } else if ((qcom->port_info[i].usb2_speed == USB_SPEED_HIGH) ||
> + (qcom->port_info[i].usb2_speed == USB_SPEED_FULL)) {
> + dwc3_qcom_disable_wakeup_irq(qcom->port_info[i].dp_hs_phy_irq);
> + } else {
> + dwc3_qcom_disable_wakeup_irq(qcom->port_info[i].dp_hs_phy_irq);
> + dwc3_qcom_disable_wakeup_irq(qcom->port_info[i].dm_hs_phy_irq);
> + }
>
> - dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].ss_phy_irq);
> + dwc3_qcom_disable_wakeup_irq(qcom->port_info[i].ss_phy_irq);
> + }
> }
>
> static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
> {
> + int i;
> +
> dwc3_qcom_enable_wakeup_irq(qcom->qusb2_phy_irq, 0);
>
> /*
> @@ -414,22 +416,24 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
> * disconnect and remote wakeup. When no device is connected, configure both
> * DP and DM lines as rising edge to detect HS/HS/LS device connect scenario.
> */
> + for (i = 0; i < qcom->num_ports; i++) {
> + qcom->port_info[i].usb2_speed = dwc3_qcom_read_usb2_speed(qcom, i);
> + if (qcom->port_info[i].usb2_speed == USB_SPEED_LOW) {
> + dwc3_qcom_enable_wakeup_irq(qcom->port_info[i].dm_hs_phy_irq,
> + IRQ_TYPE_EDGE_FALLING);
> + } else if ((qcom->port_info[i].usb2_speed == USB_SPEED_HIGH) ||
> + (qcom->port_info[i].usb2_speed == USB_SPEED_FULL)) {
> + dwc3_qcom_enable_wakeup_irq(qcom->port_info[i].dp_hs_phy_irq,
> + IRQ_TYPE_EDGE_FALLING);
> + } else {
> + dwc3_qcom_enable_wakeup_irq(qcom->port_info[i].dp_hs_phy_irq,
> + IRQ_TYPE_EDGE_RISING);
> + dwc3_qcom_enable_wakeup_irq(qcom->port_info[i].dm_hs_phy_irq,
> + IRQ_TYPE_EDGE_RISING);
> + }
>
> - if (qcom->usb2_speed == USB_SPEED_LOW) {
> - dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].dm_hs_phy_irq,
> - IRQ_TYPE_EDGE_FALLING);
> - } else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
> - (qcom->usb2_speed == USB_SPEED_FULL)) {
> - dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].dp_hs_phy_irq,
> - IRQ_TYPE_EDGE_FALLING);
> - } else {
> - dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].dp_hs_phy_irq,
> - IRQ_TYPE_EDGE_RISING);
> - dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].dm_hs_phy_irq,
> - IRQ_TYPE_EDGE_RISING);
> + dwc3_qcom_enable_wakeup_irq(qcom->port_info[i].ss_phy_irq, 0);
> }
> -
> - dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].ss_phy_irq, 0);
> }
>
> static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
> @@ -455,10 +459,8 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
> * The role is stable during suspend as role switching is done from a
> * freezable workqueue.
> */
> - if (dwc3_qcom_is_host(qcom) && wakeup) {
> - qcom->usb2_speed = dwc3_qcom_read_usb2_speed(qcom);
> + if (dwc3_qcom_is_host(qcom) && wakeup)
> dwc3_qcom_enable_interrupts(qcom);
> - }
>
> qcom->is_suspended = true;
>
> --
> 2.34.1
>
Acked-by: Thinh Nguyen <Thinh.Nguyen@...opsys.com>
BR,
Thinh
Powered by blists - more mailing lists