linux-kernel - [PATCH v3 2/3] ARM: dts: microchip: sama7g5: Add flexcom 10 node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240215091524.14732-3-mihai.sain@microchip.com>
Date: Thu, 15 Feb 2024 11:15:23 +0200
From: Mihai Sain <mihai.sain@...rochip.com>
To: <claudiu.beznea@...on.dev>, <robh+dt@...nel.org>,
	<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
	<nicolas.ferre@...rochip.com>, <alexandre.belloni@...tlin.com>,
	<andre.przywara@....com>, <devicetree@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
CC: <cristian.birsan@...rochip.com>, Mihai Sain <mihai.sain@...rochip.com>
Subject: [PATCH v3 2/3] ARM: dts: microchip: sama7g5: Add flexcom 10 node

Add flexcom 10 node for usage on the SAMA7G54 Curiosity board.

Signed-off-by: Mihai Sain <mihai.sain@...rochip.com>
---
 arch/arm/boot/dts/microchip/sama7g5.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
index 269e0a3ca269..c030b318985a 100644
--- a/arch/arm/boot/dts/microchip/sama7g5.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
@@ -958,6 +958,30 @@ i2c9: i2c@600 {
 			};
 		};
 
+		flx10: flexcom@...20000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2820000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2820000 0x800>;
+			status = "disabled";
+
+			i2c10: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(26)>,
+					<&dma0 AT91_XDMAC_DT_PERID(25)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
 		flx11: flexcom@...24000 {
 			compatible = "atmel,sama5d2-flexcom";
 			reg = <0xe2824000 0x200>;
-- 
2.43.0