Date: Thu, 15 Feb 2024 16:00:33 +0530
From: MD Danish Anwar <danishanwar@...com>
To: Vignesh Raghavendra <vigneshr@...com>, Nishanth Menon <nm@...com>
CC: Andrew Lunn <andrew@...n.ch>, Conor Dooley <conor+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring
	<robh+dt@...nel.org>, <linux-kernel@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
        Tero
 Kristo <kristo@...nel.org>, <srk@...com>, <r-gunasekaran@...com>,
        Roger
 Quadros <rogerq@...nel.org>,
        MD Danish Anwar <danishanwar@...com>
Subject: [PATCH v5 0/3] Add AM64x ICSSG Ethernet support

Hi All,

This series adds support for ICSSG ethernet on AM64x. 
This series is based on the latest next-20240214 linux-next.

AM64x EVM has three ethernet ports. One is dedicated to CPSW and one is
dedicated to ICSSG1. The remaining port is muxed between CPSW and ICSSG1
ICSSG1 ports. The ICSSG1 node is added in the k3-am642-evm.dts. By default
the muxed port is used by CPSW so 2nd ICSSG1 port is disabled in the
k3-am642-evm.dts. But overlay k3-am642-evm-icssg1-dualemac.dtso can be
applied to use muxed port as ICSSG1.

This is the v5 of the series [v1].

Changes from v4 to v5:
*) Added Roger's RB tag in patch 1/3 and 3/3
*) Modified commit message of patch 3/3
*) Dropped ti,syscon-rgmii-delay property from patch 2/3 as it is no
   longer needed.
*) Reverted the renaming of mdio-mux nodes back to 'mdio-mux-1' and
   'mdio-mux-2' from 'mdio-mux@1' and 'mdio-mux@0' as the later was
   throwing DTBS_CHECK warnings.

Changes from v3 to v4:
*) Dropped ethernet3 alias from k3-am642-evm.dts as suggested by Roger.
*) Dropped extra blank lines from k3-am642-evm.dts.
*) Updated commit message of patch 3/3
*) Updated licensing header in k3-am642-evm-icssg1-dualemac.dtso.
*) Fixed up alias for ethernet1 to icssg1_emac1 in
   k3-am642-evm-icssg1-dualemac.dtso as suggested by Roger.
*) Renamed 'mdio-mux-1' and 'mdio-mux-2' to 'mdio-mux@1' and 'mdio-mux@0'
   respectively as suggested by Roger.

Changes from v2 to v3:
*) No functional changes.
*) Rebased on latest linux-next (next-20240122) after 6.8-rc1.

Changes from v1 to v2:
*) Fixed aliases section in k3-am642-evm.dts
*) Fixed firmware-names in k3-am642-evm.dts
*) Changed icssg1_phy1 to ethernet-phy@f from ethernet-phy@0 as suggested
   by Andrew L.
*) Changed makefile to handle overlays using CONFIG_OF_ALL_DTBS as
   suggested by Nishant and Andrew Davis.
*) Fixed aliases section in k3-am642-evm-icssg1-dualemac.dtso
*) Fixed pinctrl in k3-am642-evm-icssg1-dualemac.dtso
*) Updated commit message of patch 3/3 of the series to warn about adding
   label name to 'mdio-mux-1' node.

[v1] https://lore.kernel.org/all/20231207081917.340167-1-danishanwar@ti.com/
[v2] https://lore.kernel.org/all/20231212165832.3933335-1-danishanwar@ti.com/
[v3] https://lore.kernel.org/all/20240122113045.1711818-1-danishanwar@ti.com/
[v4] https://lore.kernel.org/all/20240205090546.4000446-1-danishanwar@ti.com/

Thanks and Regards,
MD Danish Anwar

MD Danish Anwar (2):
  arm64: dts: ti: k3-am642-evm: add ICSSG1 Ethernet support
  arm64: dts: ti: k3-am642-evm: add overlay for ICSSG1 2nd port

Suman Anna (1):
  arm64: dts: ti: k3-am64-main: Add ICSSG IEP nodes

 arch/arm64/boot/dts/ti/Makefile               |  5 +
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi      | 24 +++++
 .../dts/ti/k3-am642-evm-icssg1-dualemac.dtso  | 79 +++++++++++++++
 arch/arm64/boot/dts/ti/k3-am642-evm.dts       | 97 ++++++++++++++++++-
 4 files changed, 204 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso

base-commit: 2c3b09aac00d7835023bbc4473ee06696be64fa8
-- 
2.34.1

Powered by blists - more mailing lists