| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240215111455.1462-12-shiju.jose@huawei.com>
Date: Thu, 15 Feb 2024 19:14:53 +0800
From: <shiju.jose@...wei.com>
To: <linux-cxl@...r.kernel.org>, <linux-acpi@...r.kernel.org>,
<linux-mm@...ck.org>, <dan.j.williams@...el.com>, <dave@...olabs.net>,
<jonathan.cameron@...wei.com>, <dave.jiang@...el.com>,
<alison.schofield@...el.com>, <vishal.l.verma@...el.com>,
<ira.weiny@...el.com>
CC: <linux-edac@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<david@...hat.com>, <Vilas.Sridharan@....com>, <leo.duran@....com>,
<Yazen.Ghannam@....com>, <rientjes@...gle.com>, <jiaqiyan@...gle.com>,
<tony.luck@...el.com>, <Jon.Grimm@....com>, <dave.hansen@...ux.intel.com>,
<rafael@...nel.org>, <lenb@...nel.org>, <naoya.horiguchi@....com>,
<james.morse@....com>, <jthoughton@...gle.com>, <somasundaram.a@....com>,
<erdemaktas@...gle.com>, <pgonda@...gle.com>, <duenwen@...gle.com>,
<mike.malvestuto@...el.com>, <gthelen@...gle.com>,
<wschwartz@...erecomputing.com>, <dferguson@...erecomputing.com>,
<tanxiaofei@...wei.com>, <prime.zeng@...ilicon.com>,
<kangkang.shen@...urewei.com>, <wanghuiqiang@...wei.com>,
<linuxarm@...wei.com>, <shiju.jose@...wei.com>
Subject: [RFC PATCH v6 11/12] ACPI:RAS2: Add driver for ACPI RAS2 feature table (RAS2)
From: Shiju Jose <shiju.jose@...wei.com>
Add support for ACPI RAS2 feature table (RAS2) defined in the ACPI 6.5
Specification, section 5.2.21.
This driver contains RAS2 Init, which extracts the RAS2 table.
Driver adds platform device, for each memory feature, which binds
to the RAS2 memory driver.
Signed-off-by: Shiju Jose <shiju.jose@...wei.com>
---
drivers/acpi/Makefile | 2 +-
drivers/acpi/ras2_acpi.c | 97 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 98 insertions(+), 1 deletion(-)
create mode 100755 drivers/acpi/ras2_acpi.c
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 5c984c13de78..b2baf189ea0e 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -105,7 +105,7 @@ obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
obj-$(CONFIG_ACPI_BGRT) += bgrt.o
obj-$(CONFIG_ACPI_CPPC_LIB) += cppc_acpi.o
obj-$(CONFIG_ACPI_SPCR_TABLE) += spcr.o
-obj-$(CONFIG_ACPI_RASF) += rasf_acpi_common.o
+obj-$(CONFIG_ACPI_RASF) += rasf_acpi_common.o ras2_acpi.o
obj-$(CONFIG_ACPI_DEBUGGER_USER) += acpi_dbg.o
obj-$(CONFIG_ACPI_PPTT) += pptt.o
obj-$(CONFIG_ACPI_PFRUT) += pfr_update.o pfr_telemetry.o
diff --git a/drivers/acpi/ras2_acpi.c b/drivers/acpi/ras2_acpi.c
new file mode 100755
index 000000000000..b8a7740355a8
--- /dev/null
+++ b/drivers/acpi/ras2_acpi.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ras2_acpi.c - Implementation of ACPI RAS2 feature table processing
+ * functions.
+ *
+ * Copyright (c) 2023 HiSilicon Limited.
+ *
+ * Support for
+ * RAS2 - ACPI 6.5 Specification, section 5.2.21
+ *
+ * Driver contains RAS2 init, which extracts the RAS2 table and
+ * registers the PCC channel for communicating with the ACPI compliant
+ * platform that contains RAS2 command support in hardware.Driver adds
+ * platform device which binds to the RAS2 memory driver.
+ */
+
+#define pr_fmt(fmt) "ACPI RAS2: " fmt
+
+#include <linux/export.h>
+#include <linux/delay.h>
+#include <linux/ktime.h>
+#include <linux/platform_device.h>
+#include <acpi/rasf_acpi.h>
+#include <acpi/acpixf.h>
+
+#define RAS2_FEATURE_TYPE_MEMORY 0x00
+
+int __init ras2_acpi_init(void)
+{
+ u8 count;
+ acpi_status status;
+ acpi_size ras2_size;
+ int pcc_subspace_idx;
+ struct platform_device *pdev;
+ struct acpi_table_ras2 *pRas2Table;
+ struct acpi_ras2_pcc_desc *pcc_desc_list;
+ struct platform_device **pdev_list = NULL;
+ struct acpi_table_header *pAcpiTable = NULL;
+
+ status = acpi_get_table("RAS2", 0, &pAcpiTable);
+ if (ACPI_FAILURE(status) || !pAcpiTable) {
+ pr_err("ACPI RAS2 driver failed to initialize, get table failed\n");
+ return RASF_FAILURE;
+ }
+
+ ras2_size = pAcpiTable->length;
+ if (ras2_size < sizeof(struct acpi_table_ras2)) {
+ pr_err("ACPI RAS2 table present but broken (too short #1)\n");
+ goto free_ras2_table;
+ }
+
+ pRas2Table = (struct acpi_table_ras2 *)pAcpiTable;
+
+ if (pRas2Table->num_pcc_descs <= 0) {
+ pr_err("ACPI RAS2 table does not contain PCC descriptors\n");
+ goto free_ras2_table;
+ }
+
+ pdev_list = kzalloc((pRas2Table->num_pcc_descs * sizeof(struct platform_device *)),
+ GFP_KERNEL);
+ if (!pdev_list)
+ goto free_ras2_table;
+
+ pcc_desc_list = (struct acpi_ras2_pcc_desc *)
+ ((void *)pRas2Table + sizeof(struct acpi_table_ras2));
+ count = 0;
+ while (count < pRas2Table->num_pcc_descs) {
+ if (pcc_desc_list->feature_type == RAS2_FEATURE_TYPE_MEMORY) {
+ pcc_subspace_idx = pcc_desc_list->channel_id;
+ /* Add the platform device and bind ras2 memory driver */
+ pdev = rasf_add_platform_device("ras2", &pcc_subspace_idx,
+ sizeof(pcc_subspace_idx));
+ if (!pdev)
+ goto free_ras2_pdev;
+ pdev_list[count] = pdev;
+ }
+ count++;
+ pcc_desc_list = pcc_desc_list + sizeof(struct acpi_ras2_pcc_desc);
+ }
+
+ acpi_put_table(pAcpiTable);
+ return RASF_SUCCESS;
+
+free_ras2_pdev:
+ count = 0;
+ while (count < pRas2Table->num_pcc_descs) {
+ if (pcc_desc_list->feature_type ==
+ RAS2_FEATURE_TYPE_MEMORY)
+ platform_device_put(pdev_list[count++]);
+ }
+ kfree(pdev_list);
+
+free_ras2_table:
+ acpi_put_table(pAcpiTable);
+ return RASF_FAILURE;
+}
+late_initcall(ras2_acpi_init)
--
2.34.1
Powered by blists - more mailing lists