linux-kernel - Re: [PATCH v2 2/5] media: imx335: Use v4l2_link_freq_to

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <Zc4Ix32Ld_bCD-LO@kekkonen.localdomain>
Date: Thu, 15 Feb 2024 12:51:19 +0000
From: Sakari Ailus <sakari.ailus@...ux.intel.com>
To: Umang Jain <umang.jain@...asonboard.com>
Cc: linux-media@...r.kernel.org,
	Kieran Bingham <kieran.bingham@...asonboard.com>,
	Mauro Carvalho Chehab <mchehab@...nel.org>,
	open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 2/5] media: imx335: Use v4l2_link_freq_to_bitmap helper

Hi Umang,

On Wed, Jan 31, 2024 at 11:22:05AM +0530, Umang Jain wrote:
> Use the v4l2_link_freq_to_bitmap() helper to figure out which
> driver-supported link frequencies can be used on a given system.
> 
> Signed-off-by: Umang Jain <umang.jain@...asonboard.com>
> ---
>  drivers/media/i2c/imx335.c | 36 ++++++++++++++++++------------------
>  1 file changed, 18 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
> index 927b4806a5d7..73691069556f 100644
> --- a/drivers/media/i2c/imx335.c
> +++ b/drivers/media/i2c/imx335.c
> @@ -49,7 +49,7 @@
>  #define IMX335_INCLK_RATE	24000000
>  
>  /* CSI2 HW configuration */
> -#define IMX335_LINK_FREQ	594000000
> +#define IMX335_LINK_FREQ	594000000LL

If you change this, please make it ULL---it's unsigned.

>  #define IMX335_NUM_DATA_LANES	4
>  
>  #define IMX335_REG_MIN		0x00
> @@ -134,6 +134,7 @@ struct imx335_mode {
>   * @vblank: Vertical blanking in lines
>   * @cur_mode: Pointer to current selected sensor mode
>   * @mutex: Mutex for serializing sensor controls
> + * @link_freq_bitmap: Menu bitmap for link_freq_ctrl
>   * @cur_mbus_code: Currently selected media bus format code
>   */
>  struct imx335 {
> @@ -157,6 +158,7 @@ struct imx335 {
>  	u32 vblank;
>  	const struct imx335_mode *cur_mode;
>  	struct mutex mutex;
> +	unsigned long link_freq_bitmap;
>  	u32 cur_mbus_code;
>  };
>  
> @@ -404,7 +406,8 @@ static int imx335_update_controls(struct imx335 *imx335,
>  {
>  	int ret;
>  
> -	ret = __v4l2_ctrl_s_ctrl(imx335->link_freq_ctrl, mode->link_freq_idx);
> +	ret = __v4l2_ctrl_s_ctrl(imx335->link_freq_ctrl,
> +				 __ffs(imx335->link_freq_bitmap));
>  	if (ret)
>  		return ret;
>  
> @@ -690,6 +693,13 @@ static int imx335_init_state(struct v4l2_subdev *sd,
>  	fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
>  	imx335_fill_pad_format(imx335, &supported_mode, &fmt);
>  
> +	mutex_lock(&imx335->mutex);
> +	__v4l2_ctrl_modify_range(imx335->link_freq_ctrl, 0,
> +				 __fls(imx335->link_freq_bitmap),
> +				 ~(imx335->link_freq_bitmap),
> +				 __ffs(imx335->link_freq_bitmap));
> +	mutex_unlock(&imx335->mutex);
> +
>  	return imx335_set_pad_format(sd, sd_state, &fmt);
>  }
>  
> @@ -938,19 +948,10 @@ static int imx335_parse_hw_config(struct imx335 *imx335)
>  		goto done_endpoint_free;
>  	}
>  
> -	if (!bus_cfg.nr_of_link_frequencies) {
> -		dev_err(imx335->dev, "no link frequencies defined\n");
> -		ret = -EINVAL;
> -		goto done_endpoint_free;
> -	}
> -
> -	for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++)
> -		if (bus_cfg.link_frequencies[i] == IMX335_LINK_FREQ)
> -			goto done_endpoint_free;
> -
> -	dev_err(imx335->dev, "no compatible link frequencies found\n");
> -
> -	ret = -EINVAL;
> +	ret = v4l2_link_freq_to_bitmap(imx335->dev, bus_cfg.link_frequencies,
> +				       bus_cfg.nr_of_link_frequencies,
> +				       link_freq, ARRAY_SIZE(link_freq),
> +				       &imx335->link_freq_bitmap);

Thanks! :-)

>  
>  done_endpoint_free:
>  	v4l2_fwnode_endpoint_free(&bus_cfg);
> @@ -1098,9 +1099,8 @@ static int imx335_init_controls(struct imx335 *imx335)
>  	imx335->link_freq_ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr,
>  							&imx335_ctrl_ops,
>  							V4L2_CID_LINK_FREQ,
> -							ARRAY_SIZE(link_freq) -
> -							1,
> -							mode->link_freq_idx,
> +							__fls(imx335->link_freq_bitmap),
> +							__ffs(imx335->link_freq_bitmap),
>  							link_freq);
>  	if (imx335->link_freq_ctrl)
>  		imx335->link_freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;

-- 
Regards,

Sakari Ailus