linux-kernel - Re: [PATCH v2 2/3] PCI: qcom: Read back PARF

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <Zc8GHrgdF7jJBgyu@hovoldconsulting.com>
Date: Fri, 16 Feb 2024 07:52:14 +0100
From: Johan Hovold <johan@...nel.org>
To: Konrad Dybcio <konrad.dybcio@...aro.org>
Cc: Bjorn Helgaas <helgaas@...nel.org>,
	Bjorn Andersson <andersson@...nel.org>,
	Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
	Lorenzo Pieralisi <lpieralisi@...nel.org>,
	Krzysztof Wilczyński <kw@...ux.com>,
	Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
	Philipp Zabel <p.zabel@...gutronix.de>,
	linux-arm-msm@...r.kernel.org, linux-pci@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Johan Hovold <johan+linaro@...nel.org>
Subject: Re: [PATCH v2 2/3] PCI: qcom: Read back PARF_LTSSM register

On Thu, Feb 15, 2024 at 07:44:27PM +0100, Konrad Dybcio wrote:
> On 15.02.2024 17:11, Bjorn Helgaas wrote:
> > On Thu, Feb 15, 2024 at 11:21:45AM +0100, Konrad Dybcio wrote:
> >> On 14.02.2024 23:28, Bjorn Helgaas wrote:
> >>> On Wed, Feb 14, 2024 at 10:35:16PM +0100, Konrad Dybcio wrote:
> >>>> On 12.02.2024 22:17, Bjorn Helgaas wrote:
> >>>>> Maybe include the reason in the subject?  "Read back" is literally
> >>>>> what the diff says.
> >>>>>
> >>>>> On Sat, Feb 10, 2024 at 06:10:06PM +0100, Konrad Dybcio wrote:
> >>>>>> To ensure write completion, read the PARF_LTSSM register after setting
> >>>>>> the LTSSM enable bit before polling for "link up".
> >>>>>
> >>>>> The write will obviously complete *some* time; I assume the point is
> >>>>> that it's important for it to complete before some other event, and it
> >>>>> would be nice to know why that's important.
> >>>>
> >>>> Right, that's very much meaningful on non-total-store-ordering
> >>>> architectures, like arm64, where the CPU receives a store instruction,
> >>>> but that does not necessarily impact the memory/MMIO state immediately.
> >>>
> >>> I was hinting that maybe we could say what the other event is, or what
> >>> problem this solves?  E.g., maybe it's as simple as "there's no point
> >>> in polling for link up until after the PARF_LTSSM store completes."
> >>>
> >>> But while the read of PARF_LTSSM might reduce the number of "is the
> >>> link up" polls, it probably wouldn't speed anything up otherwise, so I
> >>> suspect there's an actual functional reason for this patch, and that's
> >>> what I'm getting at.
> >>
> >> So, the register containing the "enable switch" (PARF_LTSSM) can (due
> >> to the armv8 memory model) be "written" but not "change the value of
> >> memory/mmio from the perspective of other (non-CPU) memory-readers
> >> (such as the MMIO-mapped PCI controller itself)".
> >>
> >> In that case, the CPU will happily continue calling qcom_pcie_link_up()
> >> in a loop, waiting for the PCIe controller to bring the link up, however
> >> the PCIE controller may have never received the PARF_LTSSM "enable link"
> >> write by the time we decide to time out on checking the link status.

This makes no sense. As Bjorn already said, you're just polling for the
link to come up (for a second). And unless you have something else that
depends on the write to have reached the device, there is no need to
read it back. It's not going to be cached indefinitely if that's what
you fear.

> Generally, it's a good idea to add such readbacks after all timing-
> critical writes, especially when they concern asserting reset,
> enabling/disabling power, etc., to make sure we're not assuming the
> hardware state of a peripheral has changed before we ask it to do so. 

Again no, there is no general need to do that. It all depends on what
the code does and how the device works.

Johan