lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240216070555.2483977-2-tudor.ambarus@linaro.org>
Date: Fri, 16 Feb 2024 07:05:44 +0000
From: Tudor Ambarus <tudor.ambarus@...aro.org>
To: broonie@...nel.org,
	robh@...nel.org,
	andi.shyti@...nel.org,
	krzysztof.kozlowski@...aro.org,
	semen.protsenko@...aro.org,
	conor+dt@...nel.org
Cc: alim.akhtar@...sung.com,
	linux-spi@...r.kernel.org,
	linux-samsung-soc@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org,
	andre.draszik@...aro.org,
	peter.griffin@...aro.org,
	kernel-team@...roid.com,
	willmcvicker@...gle.com,
	devicetree@...r.kernel.org,
	Tudor Ambarus <tudor.ambarus@...aro.org>
Subject: [PATCH v3 01/12] spi: dt-bindings: introduce FIFO depth properties

There are SPI IPs that can be configured by the integrator with a
specific FIFO depth depending on the system's capabilities. For example,
the samsung USI SPI IP can be configured by the integrator with a TX/RX
FIFO from 8 byte to 256 bytes.

Introduce the ``fifo-depth`` property for such instances of IPs where the
same FIFO depth is used for both RX and TX. Introduce ``rx-fifo-depth``
and ``tx-fifo-depth`` properties for cases where the RX FIFO depth is
different from the TX FIFO depth.

Make the dedicated RX/TX properties dependent on each other and mutual
exclusive with the other.

Reviewed-by: Rob Herring <robh@...nel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@...aro.org>
---
 .../bindings/spi/spi-controller.yaml          | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index 524f6fe8c27b..093150c0cb87 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -69,6 +69,21 @@ properties:
          Should be generally avoided and be replaced by
          spi-cs-high + ACTIVE_HIGH.
 
+  fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Size of the RX and TX data FIFOs in bytes.
+
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Size of the RX data FIFO in bytes.
+
+  tx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Size of the TX data FIFO in bytes.
+
   num-cs:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -116,6 +131,10 @@ patternProperties:
       - compatible
       - reg
 
+dependencies:
+  rx-fifo-depth: [ tx-fifo-depth ]
+  tx-fifo-depth: [ rx-fifo-depth ]
+
 allOf:
   - if:
       not:
@@ -129,6 +148,14 @@ allOf:
       properties:
         "#address-cells":
           const: 0
+  - not:
+      required:
+        - fifo-depth
+        - rx-fifo-depth
+  - not:
+      required:
+        - fifo-depth
+        - tx-fifo-depth
 
 additionalProperties: true
 
-- 
2.44.0.rc0.258.g7320e95886-goog


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ