| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240216071829.1513748-2-u.kleine-koenig@pengutronix.de>
Date: Fri, 16 Feb 2024 08:18:30 +0100
From: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
To: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>
Cc: linux-kernel@...r.kernel.org,
kernel@...gutronix.de
Subject: [PATCH] regulator: pwm-regulator: Use dev_err_probe() for error paths in .probe()
One error path already used the dev_err_probe() helper. Make use of it
in the other error paths, too, for consistent output. This results in a
more compact source code and symbolic output of the error code.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
---
drivers/regulator/pwm-regulator.c | 40 +++++++++++++------------------
1 file changed, 17 insertions(+), 23 deletions(-)
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index 60cfcd741c2a..7434b6b22d32 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -271,11 +271,10 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
of_find_property(np, "voltage-table", &length);
if ((length < sizeof(*duty_cycle_table)) ||
- (length % sizeof(*duty_cycle_table))) {
- dev_err(&pdev->dev, "voltage-table length(%d) is invalid\n",
- length);
- return -EINVAL;
- }
+ (length % sizeof(*duty_cycle_table)))
+ return dev_err_probe(&pdev->dev, -EINVAL,
+ "voltage-table length(%d) is invalid\n",
+ length);
duty_cycle_table = devm_kzalloc(&pdev->dev, length, GFP_KERNEL);
if (!duty_cycle_table)
@@ -284,10 +283,9 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
ret = of_property_read_u32_array(np, "voltage-table",
(u32 *)duty_cycle_table,
length / sizeof(u32));
- if (ret) {
- dev_err(&pdev->dev, "Failed to read voltage-table: %d\n", ret);
- return ret;
- }
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "Failed to read voltage-table\n");
drvdata->state = -ENOTRECOVERABLE;
drvdata->duty_cycle_table = duty_cycle_table;
@@ -359,10 +357,9 @@ static int pwm_regulator_probe(struct platform_device *pdev)
enum gpiod_flags gpio_flags;
int ret;
- if (!np) {
- dev_err(&pdev->dev, "Device Tree node missing\n");
- return -EINVAL;
- }
+ if (!np)
+ return dev_err_probe(&pdev->dev, -EINVAL,
+ "Device Tree node missing\n");
drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
if (!drvdata)
@@ -400,8 +397,7 @@ static int pwm_regulator_probe(struct platform_device *pdev)
gpio_flags);
if (IS_ERR(drvdata->enb_gpio)) {
ret = PTR_ERR(drvdata->enb_gpio);
- dev_err(&pdev->dev, "Failed to get enable GPIO: %d\n", ret);
- return ret;
+ return dev_err_probe(&pdev->dev, ret, "Failed to get enable GPIO\n");
}
ret = pwm_adjust_config(drvdata->pwm);
@@ -409,19 +405,17 @@ static int pwm_regulator_probe(struct platform_device *pdev)
return ret;
ret = pwm_regulator_init_boot_on(pdev, drvdata, init_data);
- if (ret) {
- dev_err(&pdev->dev, "Failed to apply boot_on settings: %d\n",
- ret);
- return ret;
- }
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "Failed to apply boot_on settings\n");
regulator = devm_regulator_register(&pdev->dev,
&drvdata->desc, &config);
if (IS_ERR(regulator)) {
ret = PTR_ERR(regulator);
- dev_err(&pdev->dev, "Failed to register regulator %s: %d\n",
- drvdata->desc.name, ret);
- return ret;
+ return dev_err_probe(&pdev->dev, ret,
+ "Failed to register regulator %s\n",
+ drvdata->desc.name);
}
return 0;
base-commit: d37e1e4c52bc60578969f391fb81f947c3e83118
--
2.43.0
Powered by blists - more mailing lists