linux-kernel - [PATCH v2 3/4] ARM: dts: stm32: enable display support on stm32mp135f-dk board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240217-ltdc_mp13-v2-3-50881f1b394e@foss.st.com>
Date: Sat, 17 Feb 2024 12:02:57 +0100
From: Raphael Gallais-Pou <raphael.gallais-pou@...s.st.com>
To: Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski
	<krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre Torgue
	<alexandre.torgue@...s.st.com>,
        Neil Armstrong <neil.armstrong@...aro.org>,
        Jessica Zhang <quic_jesszhan@...cinc.com>,
        Sam Ravnborg <sam@...nborg.org>,
        Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
        Maxime Ripard
	<mripard@...nel.org>,
        Thomas Zimmermann <tzimmermann@...e.de>,
        David Airlie
	<airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>
CC: <devicetree@...r.kernel.org>, <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
        <dri-devel@...ts.freedesktop.org>,
        Raphael Gallais-Pou
	<raphael.gallais-pou@...s.st.com>
Subject: [PATCH v2 3/4] ARM: dts: stm32: enable display support on
 stm32mp135f-dk board

Link panel and display controller.
Enable panel, backlight and display controller.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@...s.st.com>

---
Changes in v2:
  - Fixed dtbs_check warnings :
arch/arm/boot/dts/st/stm32mp135f-dk.dtb: panel-backlight: 'default-brightness-level' does not match any of the regexes: 'pinctrl-[0-9]+'
  from schema $id: http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml#
arch/arm/boot/dts/st/stm32mp135f-dk.dtb: panel-rgb: data-mapping:0: 'bgr666' is not one of ['jeida-18', 'jeida-24', 'vesa-24']
  from schema $id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#
arch/arm/boot/dts/st/stm32mp135f-dk.dtb: panel-rgb: compatible: ['rocktech,rk043fn48h', 'panel-dpi'] is too long
  from schema $id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#
arch/arm/boot/dts/st/stm32mp135f-dk.dtb: panel-rgb: data-mapping: False schema does not allow ['bgr666']
  from schema $id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#
---
 arch/arm/boot/dts/st/stm32mp135f-dk.dts | 53 +++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
index eea740d097c7..c918f332cbfd 100644
--- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
@@ -66,6 +66,46 @@ led-blue {
 			default-state = "off";
 		};
 	};
+
+	panel_backlight: panel-backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpioe 12 GPIO_ACTIVE_HIGH>;
+		default-on;
+		status = "okay";
+	};
+
+	panel_rgb: panel-rgb {
+		compatible = "rocktech,rk043fn48h";
+		enable-gpios = <&gpioi 7 GPIO_ACTIVE_HIGH>;
+		backlight = <&panel_backlight>;
+		power-supply = <&scmi_v3v3_sw>;
+		status = "okay";
+
+		width-mm = <105>;
+		height-mm = <67>;
+
+		panel-timing {
+			clock-frequency = <10000000>;
+			hactive = <480>;
+			hback-porch = <43>;
+			hfront-porch = <10>;
+			hsync-len = <1>;
+			hsync-active = <0>;
+			vactive = <272>;
+			vback-porch = <26>;
+			vfront-porch = <4>;
+			vsync-len = <10>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			panel_in_rgb: endpoint {
+				remote-endpoint = <&ltdc_out_rgb>;
+			};
+		};
+	};
 };
 
 &adc_1 {
@@ -160,6 +200,19 @@ &iwdg2 {
 	status = "okay";
 };
 
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_a>;
+	pinctrl-1 = <&ltdc_sleep_pins_a>;
+	status = "okay";
+
+	port {
+		ltdc_out_rgb: endpoint {
+			remote-endpoint = <&panel_in_rgb>;
+		};
+	};
+};
+
 &rtc {
 	status = "okay";
 };

-- 
2.25.1