[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <848b6e87-357b-4935-857e-337ad72a2b06@linaro.org>
Date: Sat, 17 Feb 2024 15:03:56 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Kory Maincent <kory.maincent@...tlin.com>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Jonathan Corbet <corbet@....net>, Luis Chamberlain <mcgrof@...nel.org>,
Russ Weight <russ.weight@...ux.dev>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Rafael J. Wysocki" <rafael@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Oleksij Rempel
<o.rempel@...gutronix.de>, Mark Brown <broonie@...nel.org>,
Frank Rowand <frowand.list@...il.com>, Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>, Russell King <linux@...linux.org.uk>
Cc: Thomas Petazzoni <thomas.petazzoni@...tlin.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-doc@...r.kernel.org,
devicetree@...r.kernel.org, Dent Project <dentproject@...uxfoundation.org>
Subject: Re: [PATCH net-next v4 14/17] dt-bindings: net: pse-pd: Add bindings
for PD692x0 PSE controller
On 15/02/2024 17:02, Kory Maincent wrote:
> Add the PD692x0 I2C Power Sourcing Equipment controller device tree
> bindings documentation.
>
> This patch is sponsored by Dent Project <dentproject@...uxfoundation.org>.
>
> Signed-off-by: Kory Maincent <kory.maincent@...tlin.com>
> ---
>
> Changes in v2:
> - Enhance ports-matrix description.
> - Replace additionalProperties by unevaluatedProperties.
> - Drop i2c suffix.
>
> Changes in v3:
> - Remove ports-matrix parameter.
> - Add description of all physical ports and managers.
> - Add pse_pis subnode moving to the API of pse-controller binding.
> - Remove the MAINTAINERS section for this driver as I will be maintaining
> all pse-pd subsystem.
> ---
> .../bindings/net/pse-pd/microchip,pd692x0.yaml | 157 +++++++++++++++++++++
> 1 file changed, 157 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml b/Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml
> new file mode 100644
> index 000000000000..57ba5365157c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml
> @@ -0,0 +1,157 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/pse-pd/microchip,pd692x0.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip PD692x0 Power Sourcing Equipment controller
> +
> +maintainers:
> + - Kory Maincent <kory.maincent@...tlin.com>
> +
> +allOf:
> + - $ref: pse-controller.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - microchip,pd69200
> + - microchip,pd69210
> + - microchip,pd69220
> +
> + reg:
> + maxItems: 1
> +
> + managers:
> + $ref: "#/$defs/managers"
> + description:
> + List of the PD69208T4/PD69204T4/PD69208M PSE managers. Each manager
> + have 4 or 8 physical ports according to the chip version. No need to
> + specify the SPI chip select as it is automatically detected by the
> + PD692x0 PSE controller. The PSE managers have to be described from
> + the lowest chip select to the greatest one, which is the detection
> + behavior of the PD692x0 PSE controller. The PD692x0 support up to
> + 12 PSE managers which can expose up to 96 physical ports. All
> + physical ports available on a manager have to be described in the
> + incremental order even if they are not used.
> +
> +required:
> + - compatible
> + - reg
> + - pse_pis
> +
> +$defs:
Why do you need defs for it? You use it only in one place.
..
> +
> + pse_pis {
Again... no underscores in node names.
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pse_pi0: pse_pi@0 {
Just compile your DTS with W=2.
Best regards,
Krzysztof
Powered by blists - more mailing lists