| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAMgjq7CG_QnL5v_=omOSqQ7+j9+oMtW7GiFkJRdrFs-PnAjZnQ@mail.gmail.com>
Date: Sun, 18 Feb 2024 17:30:31 +0800
From: Kairui Song <ryncsn@...il.com>
To: Barry Song <21cnbao@...il.com>
Cc: "Huang, Ying" <ying.huang@...el.com>, David Hildenbrand <david@...hat.com>, linux-mm@...ck.org,
Andrew Morton <akpm@...ux-foundation.org>, Chris Li <chrisl@...nel.org>,
Minchan Kim <minchan@...nel.org>, Yu Zhao <yuzhao@...gle.com>,
Barry Song <v-songbaohua@...o.com>, SeongJae Park <sj@...nel.org>, Hugh Dickins <hughd@...gle.com>,
Johannes Weiner <hannes@...xchg.org>, Matthew Wilcox <willy@...radead.org>, Michal Hocko <mhocko@...e.com>,
Yosry Ahmed <yosryahmed@...gle.com>, stable@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3] mm/swap: fix race when skipping swapcache
On Sun, Feb 18, 2024 at 4:47 PM Barry Song <21cnbao@...il.com> wrote:
>
> On Sun, Feb 18, 2024 at 9:41 PM Huang, Ying <ying.huang@...el.com> wrote:
> >
> > Barry Song <21cnbao@...il.com> writes:
> >
> > > On Sun, Feb 18, 2024 at 9:02 PM Huang, Ying <ying.huang@...elcom> wrote:
> > >>
> > >> David Hildenbrand <david@...hat.com> writes:
> > >>
> > >> > On 16.02.24 10:51, Kairui Song wrote:
> > >> >> From: Kairui Song <kasong@...cent.com>
> > >> >> When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more
> > >> >> threads
> > >> >> swapin the same entry at the same time, they get different pages (A, B).
> > >> >> Before one thread (T0) finishes the swapin and installs page (A)
> > >> >> to the PTE, another thread (T1) could finish swapin of page (B),
> > >> >> swap_free the entry, then swap out the possibly modified page
> > >> >> reusing the same entry. It breaks the pte_same check in (T0) because
> > >> >> PTE value is unchanged, causing ABA problem. Thread (T0) will
> > >> >> install a stalled page (A) into the PTE and cause data corruption.
> > >> >> One possible callstack is like this:
> > >> >> CPU0 CPU1
> > >> >> ---- ----
> > >> >> do_swap_page() do_swap_page() with same entry
> > >> >> <direct swapin path> <direct swapin path>
> > >> >> <alloc page A> <alloc page B>
> > >> >> swap_read_folio() <- read to page A swap_read_folio() <- read to page B
> > >> >> <slow on later locks or interrupt> <finished swapin first>
> > >> >> ... set_pte_at()
> > >> >> swap_free() <- entry is free
> > >> >> <write to page B, now page A stalled>
> > >> >> <swap out page B to same swap entry>
> > >> >> pte_same() <- Check pass, PTE seems
> > >> >> unchanged, but page A
> > >> >> is stalled!
> > >> >> swap_free() <- page B content lost!
> > >> >> set_pte_at() <- staled page A installed!
> > >> >> And besides, for ZRAM, swap_free() allows the swap device to discard
> > >> >> the entry content, so even if page (B) is not modified, if
> > >> >> swap_read_folio() on CPU0 happens later than swap_free() on CPU1,
> > >> >> it may also cause data loss.
> > >> >> To fix this, reuse swapcache_prepare which will pin the swap entry
> > >> >> using
> > >> >> the cache flag, and allow only one thread to pin it. Release the pin
> > >> >> after PT unlocked. Racers will simply wait since it's a rare and very
> > >> >> short event. A schedule() call is added to avoid wasting too much CPU
> > >> >> or adding too much noise to perf statistics
> > >> >> Other methods like increasing the swap count don't seem to be a good
> > >> >> idea after some tests, that will cause racers to fall back to use the
> > >> >> swap cache again. Parallel swapin using different methods leads to
> > >> >> a much more complex scenario.
> > >> >> Reproducer:
> > >> >> This race issue can be triggered easily using a well constructed
> > >> >> reproducer and patched brd (with a delay in read path) [1]:
> > >> >> With latest 6.8 mainline, race caused data loss can be observed
> > >> >> easily:
> > >> >> $ gcc -g -lpthread test-thread-swap-race.c && ./a.out
> > >> >> Polulating 32MB of memory region...
> > >> >> Keep swapping out...
> > >> >> Starting round 0...
> > >> >> Spawning 65536 workers...
> > >> >> 32746 workers spawned, wait for done...
> > >> >> Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss!
> > >> >> Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss!
> > >> >> Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss!
> > >> >> Round 0 Failed, 15 data loss!
> > >> >> This reproducer spawns multiple threads sharing the same memory
> > >> >> region
> > >> >> using a small swap device. Every two threads updates mapped pages one by
> > >> >> one in opposite direction trying to create a race, with one dedicated
> > >> >> thread keep swapping out the data out using madvise.
> > >> >> The reproducer created a reproduce rate of about once every 5
> > >> >> minutes,
> > >> >> so the race should be totally possible in production.
> > >> >> After this patch, I ran the reproducer for over a few hundred rounds
> > >> >> and no data loss observed.
> > >> >> Performance overhead is minimal, microbenchmark swapin 10G from 32G
> > >> >> zram:
> > >> >> Before: 10934698 us
> > >> >> After: 11157121 us
> > >> >> Non-direct: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag)
> > >> >> Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of
> > >> >> synchronous device")
> > >> >> Link: https://github.com/ryncsn/emm-test-project/tree/master/swap-stress-race [1]
> > >> >> Reported-by: "Huang, Ying" <ying.huang@...el.com>
> > >> >> Closes: https://lore.kernel.org/lkml/87bk92gqpx.fsf_-_@yhuang6-desk2.ccr.corp.intel.com/
> > >> >> Signed-off-by: Kairui Song <kasong@...cent.com>
> > >> >> Cc: stable@...r.kernel.org
> > >> >> ---
> > >> >> Update from V2:
> > >> >> - Add a schedule() if raced to prevent repeated page faults wasting CPU
> > >> >> and add noise to perf statistics.
> > >> >> - Use a bool to state the special case instead of reusing existing
> > >> >> variables fixing error handling [Minchan Kim].
> > >> >> V2:
> > >> >> https://lore.kernel.org/all/20240206182559.32264-1-ryncsn@gmail.com/
> > >> >> Update from V1:
> > >> >> - Add some words on ZRAM case, it will discard swap content on swap_free so the race window is a bit different but cure is the same. [Barry Song]
> > >> >> - Update comments make it cleaner [Huang, Ying]
> > >> >> - Add a function place holder to fix CONFIG_SWAP=n built [SeongJae Park]
> > >> >> - Update the commit message and summary, refer to SWP_SYNCHRONOUS_IO instead of "direct swapin path" [Yu Zhao]
> > >> >> - Update commit message.
> > >> >> - Collect Review and Acks.
> > >> >> V1:
> > >> >> https://lore.kernel.org/all/20240205110959.4021-1-ryncsn@gmail.com/
> > >> >> include/linux/swap.h | 5 +++++
> > >> >> mm/memory.c | 20 ++++++++++++++++++++
> > >> >> mm/swap.h | 5 +++++
> > >> >> mm/swapfile.c | 13 +++++++++++++
> > >> >> 4 files changed, 43 insertions(+)
> > >> >> diff --git a/include/linux/swap.h b/include/linux/swap.h
> > >> >> index 4db00ddad261..8d28f6091a32 100644
> > >> >> --- a/include/linux/swap.h
> > >> >> +++ b/include/linux/swap.h
> > >> >> @@ -549,6 +549,11 @@ static inline int swap_duplicate(swp_entry_t swp)
> > >> >> return 0;
> > >> >> }
> > >> >> +static inline int swapcache_prepare(swp_entry_t swp)
> > >> >> +{
> > >> >> + return 0;
> > >> >> +}
> > >> >> +
> > >> >> static inline void swap_free(swp_entry_t swp)
> > >> >> {
> > >> >> }
> > >> >> diff --git a/mm/memory.c b/mm/memory.c
> > >> >> index 7e1f4849463a..7059230d0a54 100644
> > >> >> --- a/mm/memory.c
> > >> >> +++ b/mm/memory.c
> > >> >> @@ -3799,6 +3799,7 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
> > >> >> struct page *page;
> > >> >> struct swap_info_struct *si = NULL;
> > >> >> rmap_t rmap_flags = RMAP_NONE;
> > >> >> + bool need_clear_cache = false;
> > >> >> bool exclusive = false;
> > >> >> swp_entry_t entry;
> > >> >> pte_t pte;
> > >> >> @@ -3867,6 +3868,20 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
> > >> >> if (!folio) {
> > >> >> if (data_race(si->flags & SWP_SYNCHRONOUS_IO) &&
> > >> >> __swap_count(entry) == 1) {
> > >> >> + /*
> > >> >> + * Prevent parallel swapin from proceeding with
> > >> >> + * the cache flag. Otherwise, another thread may
> > >> >> + * finish swapin first, free the entry, and swapout
> > >> >> + * reusing the same entry. It's undetectable as
> > >> >> + * pte_same() returns true due to entry reuse.
> > >> >> + */
> > >> >> + if (swapcache_prepare(entry)) {
> > >> >> + /* Relax a bit to prevent rapid repeated page faults */
> > >> >> + schedule();
> > >> >> + goto out;
> > >> >> + }
> > >> >> + need_clear_cache = true;
> > >> >> +
> > >> >
> > >> > I took a closer look at __read_swap_cache_async() and it essentially
> > >> > does something similar.
> > >> >
> > >> > Instead of returning, it keeps retrying until it finds that
> > >> > swapcache_prepare() fails for another reason than -EEXISTS (e.g.,
> > >> > freed concurrently) or it finds the entry in the swapcache.
> > >> >
> > >> > So if you would succeed here on a freed+reused swap entry,
> > >> > __read_swap_cache_async() would simply retry.
> > >> >
> > >> > It spells that out:
> > >> >
> > >> > /*
> > >> > * We might race against __delete_from_swap_cache(), and
> > >> > * stumble across a swap_map entry whose SWAP_HAS_CACHE
> > >> > * has not yet been cleared. Or race against another
> > >> > * __read_swap_cache_async(), which has set SWAP_HAS_CACHE
> > >> > * in swap_map, but not yet added its folio to swap cache.
> > >> > */
> > >> >
> > >> > Whereby we could not race against this code here as well where we
> > >> > speculatively set SWAP_HAS_CACHE and might never add something to the swap
> > >> > cache.
> > >> >
> > >> >
> > >> > I'd probably avoid the wrong returns and do something even closer to
> > >> > __read_swap_cache_async().
> > >> >
> > >> > while (true) {
> > >> > /*
> > >> > * Fake that we are trying to insert a page into the swapcache, to
> > >> > * serialize against concurrent threads wanting to do the same.
> > >> > * [more from your description]
> > >> > */
> > >> > ret = swapcache_prepare(entry);
> > >> > if (likely(!ret)
> > >> > /*
> > >> > * Move forward with swapin, we'll recheck if the PTE hasn't
> > >> > * changed later.
> > >> > */
> > >> > break;
> > >> > else if (ret != -EEXIST)
> > >> > goto out;
> > >>
> > >> The swap entry may be kept in swap cache for long time. For example, it
> > >> may be read into swap cache via MADV_WILLNEED.
> > >
> > > This seems fine.
> > >
> > > if swapcache has data from WILLNEED, the new page fault will hit it. Thus,
> > > we won't go into the SYNC_IO path any more?
> >
> > They may happen in parallel. That is, one task is busy looping, while
> > another task read the swap entry into swap cache.
>
> do_swap_page isn't busy looping swapcache_prepare, if it fails, it exits,
> then we have a completely new page fault. this new page fault will
> lookup swapcache and find it, going into the path to set swapcache
> to ptes. so the new page fault won't do swapcache_prepare any more.
>
Hi Barry
The issue here with this code snip is that we could have
swapcache_prepare(entry) == -EEXIST and pte_same == true, not
necessarily WILLNEED, a concurrent fault and swapout could cause that.
Then we are stuck with while(true) here.
It can be fixed, but still there are other potential issues, we end up
with a similar loop in swap_state.c, may still need to bail out the
fault for some cases, things seem not improved here.
Powered by blists - more mailing lists