| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240218041649.1209173-3-aford173@gmail.com>
Date: Sat, 17 Feb 2024 22:16:40 -0600
From: Adam Ford <aford173@...il.com>
To: linux-arm-kernel@...ts.infradead.org,
linux-phy@...ts.infradead.org
Cc: aford@...conembedded.com,
Lucas Stach <l.stach@...gutronix.de>,
Luca Ceresoli <luca.ceresoli@...tlin.com>,
Richard Leitner <richard.leitner@...data.com>,
Marco Felsch <m.felsch@...gutronix.de>,
Alexander Stein <alexander.stein@...tq-group.com>,
Frieder Schrempf <frieder.schrempf@...tron.de>,
Adam Ford <aford173@...il.com>,
Marek Vasut <marex@...x.de>,
Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH V5 2/6] phy: freescale: add Samsung HDMI PHY
From: Lucas Stach <l.stach@...gutronix.de>
This adds the driver for the Samsung HDMI PHY found on the
i.MX8MP SoC. Based on downstream implementation from
Sandor Yu <Sandor.yu@....com>. According to the TRM, the PHY
receives parallel data from the link and serializes it. It
also sets the PLL clock needed for the TX serializer.
Tested-by: Luca Ceresoli <luca.ceresoli@...tlin.com> (v2)
Tested-by: Richard Leitner <richard.leitner@...data.com> (v2)
Co-developed-by: Marco Felsch <m.felsch@...gutronix.de>
Signed-off-by: Marco Felsch <m.felsch@...gutronix.de>
Signed-off-by: Lucas Stach <l.stach@...gutronix.de>
Tested-by: Alexander Stein <alexander.stein@...tq-group.com>
Tested-by: Frieder Schrempf <frieder.schrempf@...tron.de> # Kontron BL
Signed-off-by: Adam Ford <aford173@...il.com>
Tested-by: Marek Vasut <marex@...x.de>
Tested-by: Luca Ceresoli <luca.ceresoli@...tlin.com>
---
V5: Remove an unnecessary include
Migrate from of_clk_add_provider to of_clk_add_hw_provider
Make const structures static
Fix uninitialized variables and prevent div by 0
Mark PM functions as __maybe_unused
V4:
- I (Adam) added a comment in the code for clarifcation
based on questions from Luca concerning a difference
between the code and the ref manual.
- Fixed the GENMASK on REG14
- Expanded the commit message briefly describing
a bit more of what this driver does.
- Removed some unnecessary include files.
v3:
- use GENMASK/FIELD_PREP
- lowercase hex values
- correct coding style
v2:
- use DEFINE_RUNTIME_DEV_PM_OPS
---
drivers/phy/freescale/Kconfig | 6 +
drivers/phy/freescale/Makefile | 1 +
drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 720 +++++++++++++++++++
3 files changed, 727 insertions(+)
create mode 100644 drivers/phy/freescale/phy-fsl-samsung-hdmi.c
diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
index 853958fb2c06..5c2b73042dfc 100644
--- a/drivers/phy/freescale/Kconfig
+++ b/drivers/phy/freescale/Kconfig
@@ -35,6 +35,12 @@ config PHY_FSL_IMX8M_PCIE
Enable this to add support for the PCIE PHY as found on
i.MX8M family of SOCs.
+config PHY_FSL_SAMSUNG_HDMI_PHY
+ tristate "Samsung HDMI PHY support"
+ depends on OF && HAS_IOMEM
+ help
+ Enable this to add support for the Samsung HDMI PHY in i.MX8MP.
+
endif
config PHY_FSL_LYNX_28G
diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
index cedb328bc4d2..c4386bfdb853 100644
--- a/drivers/phy/freescale/Makefile
+++ b/drivers/phy/freescale/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_PHY_MIXEL_LVDS_PHY) += phy-fsl-imx8qm-lvds-phy.o
obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY) += phy-fsl-imx8-mipi-dphy.o
obj-$(CONFIG_PHY_FSL_IMX8M_PCIE) += phy-fsl-imx8m-pcie.o
obj-$(CONFIG_PHY_FSL_LYNX_28G) += phy-fsl-lynx-28g.o
+obj-$(CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY) += phy-fsl-samsung-hdmi.o
diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
new file mode 100644
index 000000000000..89e2c01f2ccf
--- /dev/null
+++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
@@ -0,0 +1,720 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ * Copyright 2022 Pengutronix, Lucas Stach <kernel@...gutronix.de>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define PHY_REG_00 0x00
+#define PHY_REG_01 0x04
+#define PHY_REG_02 0x08
+#define PHY_REG_08 0x20
+#define PHY_REG_09 0x24
+#define PHY_REG_10 0x28
+#define PHY_REG_11 0x2c
+
+#define PHY_REG_12 0x30
+#define REG12_CK_DIV_MASK GENMASK(5, 4)
+
+#define PHY_REG_13 0x34
+#define REG13_TG_CODE_LOW_MASK GENMASK(7, 0)
+
+#define PHY_REG_14 0x38
+#define REG14_TOL_MASK GENMASK(7, 4)
+#define REG14_RP_CODE_MASK GENMASK(3, 1)
+#define REG14_TG_CODE_HIGH_MASK GENMASK(0, 0)
+
+#define PHY_REG_15 0x3c
+#define PHY_REG_16 0x40
+#define PHY_REG_17 0x44
+#define PHY_REG_18 0x48
+#define PHY_REG_19 0x4c
+#define PHY_REG_20 0x50
+
+#define PHY_REG_21 0x54
+#define REG21_SEL_TX_CK_INV BIT(7)
+#define REG21_PMS_S_MASK GENMASK(3, 0)
+
+#define PHY_REG_22 0x58
+#define PHY_REG_23 0x5c
+#define PHY_REG_24 0x60
+#define PHY_REG_25 0x64
+#define PHY_REG_26 0x68
+#define PHY_REG_27 0x6c
+#define PHY_REG_28 0x70
+#define PHY_REG_29 0x74
+#define PHY_REG_30 0x78
+#define PHY_REG_31 0x7c
+#define PHY_REG_32 0x80
+
+/*
+ * REG33 does not match the ref manual. According to Sandor Yu from NXP,
+ * "There is a doc issue on the i.MX8MP latest RM"
+ * REG33 is being used per guidance from Sandor
+ */
+
+#define PHY_REG_33 0x84
+#define REG33_MODE_SET_DONE BIT(7)
+#define REG33_FIX_DA BIT(1)
+
+#define PHY_REG_34 0x88
+#define REG34_PHY_READY BIT(7)
+#define REG34_PLL_LOCK BIT(6)
+#define REG34_PHY_CLK_READY BIT(5)
+
+#define PHY_REG_35 0x8c
+#define PHY_REG_36 0x90
+#define PHY_REG_37 0x94
+#define PHY_REG_38 0x98
+#define PHY_REG_39 0x9c
+#define PHY_REG_40 0xa0
+#define PHY_REG_41 0xa4
+#define PHY_REG_42 0xa8
+#define PHY_REG_43 0xac
+#define PHY_REG_44 0xb0
+#define PHY_REG_45 0xb4
+#define PHY_REG_46 0xb8
+#define PHY_REG_47 0xbc
+
+#define PHY_PLL_DIV_REGS_NUM 6
+
+struct phy_config {
+ u32 pixclk;
+ u8 pll_div_regs[PHY_PLL_DIV_REGS_NUM];
+};
+
+static const struct phy_config phy_pll_cfg[] = {
+ {
+ .pixclk = 22250000,
+ .pll_div_regs = { 0x4b, 0xf1, 0x89, 0x88, 0x80, 0x40 },
+ }, {
+ .pixclk = 23750000,
+ .pll_div_regs = { 0x50, 0xf1, 0x86, 0x85, 0x80, 0x40 },
+ }, {
+ .pixclk = 24000000,
+ .pll_div_regs = { 0x50, 0xf0, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 24024000,
+ .pll_div_regs = { 0x50, 0xf1, 0x99, 0x02, 0x80, 0x40 },
+ }, {
+ .pixclk = 25175000,
+ .pll_div_regs = { 0x54, 0xfc, 0xcc, 0x91, 0x80, 0x40 },
+ }, {
+ .pixclk = 25200000,
+ .pll_div_regs = { 0x54, 0xf0, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 26750000,
+ .pll_div_regs = { 0x5a, 0xf2, 0x89, 0x88, 0x80, 0x40 },
+ }, {
+ .pixclk = 27000000,
+ .pll_div_regs = { 0x5a, 0xf0, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 27027000,
+ .pll_div_regs = { 0x5a, 0xf2, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 29500000,
+ .pll_div_regs = { 0x62, 0xf4, 0x95, 0x08, 0x80, 0x40 },
+ }, {
+ .pixclk = 30750000,
+ .pll_div_regs = { 0x66, 0xf4, 0x82, 0x01, 0x88, 0x45 },
+ }, {
+ .pixclk = 30888000,
+ .pll_div_regs = { 0x66, 0xf4, 0x99, 0x18, 0x88, 0x45 },
+ }, {
+ .pixclk = 33750000,
+ .pll_div_regs = { 0x70, 0xf4, 0x82, 0x01, 0x80, 0x40 },
+ }, {
+ .pixclk = 35000000,
+ .pll_div_regs = { 0x58, 0xb8, 0x8b, 0x88, 0x80, 0x40 },
+ }, {
+ .pixclk = 36000000,
+ .pll_div_regs = { 0x5a, 0xb0, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 36036000,
+ .pll_div_regs = { 0x5a, 0xb2, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 40000000,
+ .pll_div_regs = { 0x64, 0xb0, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 43200000,
+ .pll_div_regs = { 0x5a, 0x90, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 43243200,
+ .pll_div_regs = { 0x5a, 0x92, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 44500000,
+ .pll_div_regs = { 0x5c, 0x92, 0x98, 0x11, 0x84, 0x41 },
+ }, {
+ .pixclk = 47000000,
+ .pll_div_regs = { 0x62, 0x94, 0x95, 0x82, 0x80, 0x40 },
+ }, {
+ .pixclk = 47500000,
+ .pll_div_regs = { 0x63, 0x96, 0xa1, 0x82, 0x80, 0x40 },
+ }, {
+ .pixclk = 50349650,
+ .pll_div_regs = { 0x54, 0x7c, 0xc3, 0x8f, 0x80, 0x40 },
+ }, {
+ .pixclk = 50400000,
+ .pll_div_regs = { 0x54, 0x70, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 53250000,
+ .pll_div_regs = { 0x58, 0x72, 0x84, 0x03, 0x82, 0x41 },
+ }, {
+ .pixclk = 53500000,
+ .pll_div_regs = { 0x5a, 0x72, 0x89, 0x88, 0x80, 0x40 },
+ }, {
+ .pixclk = 54000000,
+ .pll_div_regs = { 0x5a, 0x70, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 54054000,
+ .pll_div_regs = { 0x5a, 0x72, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 59000000,
+ .pll_div_regs = { 0x62, 0x74, 0x95, 0x08, 0x80, 0x40 },
+ }, {
+ .pixclk = 59340659,
+ .pll_div_regs = { 0x62, 0x74, 0xdb, 0x52, 0x88, 0x47 },
+ }, {
+ .pixclk = 59400000,
+ .pll_div_regs = { 0x63, 0x70, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 61500000,
+ .pll_div_regs = { 0x66, 0x74, 0x82, 0x01, 0x88, 0x45 },
+ }, {
+ .pixclk = 63500000,
+ .pll_div_regs = { 0x69, 0x74, 0x89, 0x08, 0x80, 0x40 },
+ }, {
+ .pixclk = 67500000,
+ .pll_div_regs = { 0x54, 0x52, 0x87, 0x03, 0x80, 0x40 },
+ }, {
+ .pixclk = 70000000,
+ .pll_div_regs = { 0x58, 0x58, 0x8b, 0x88, 0x80, 0x40 },
+ }, {
+ .pixclk = 72000000,
+ .pll_div_regs = { 0x5a, 0x50, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 72072000,
+ .pll_div_regs = { 0x5a, 0x52, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 74176000,
+ .pll_div_regs = { 0x5d, 0x58, 0xdb, 0xA2, 0x88, 0x41 },
+ }, {
+ .pixclk = 74250000,
+ .pll_div_regs = { 0x5c, 0x52, 0x90, 0x0d, 0x84, 0x41 },
+ }, {
+ .pixclk = 78500000,
+ .pll_div_regs = { 0x62, 0x54, 0x87, 0x01, 0x80, 0x40 },
+ }, {
+ .pixclk = 80000000,
+ .pll_div_regs = { 0x64, 0x50, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 82000000,
+ .pll_div_regs = { 0x66, 0x54, 0x82, 0x01, 0x88, 0x45 },
+ }, {
+ .pixclk = 82500000,
+ .pll_div_regs = { 0x67, 0x54, 0x88, 0x01, 0x90, 0x49 },
+ }, {
+ .pixclk = 89000000,
+ .pll_div_regs = { 0x70, 0x54, 0x84, 0x83, 0x80, 0x40 },
+ }, {
+ .pixclk = 90000000,
+ .pll_div_regs = { 0x70, 0x54, 0x82, 0x01, 0x80, 0x40 },
+ }, {
+ .pixclk = 94000000,
+ .pll_div_regs = { 0x4e, 0x32, 0xa7, 0x10, 0x80, 0x40 },
+ }, {
+ .pixclk = 95000000,
+ .pll_div_regs = { 0x50, 0x31, 0x86, 0x85, 0x80, 0x40 },
+ }, {
+ .pixclk = 98901099,
+ .pll_div_regs = { 0x52, 0x3a, 0xdb, 0x4c, 0x88, 0x47 },
+ }, {
+ .pixclk = 99000000,
+ .pll_div_regs = { 0x52, 0x32, 0x82, 0x01, 0x88, 0x47 },
+ }, {
+ .pixclk = 100699300,
+ .pll_div_regs = { 0x54, 0x3c, 0xc3, 0x8f, 0x80, 0x40 },
+ }, {
+ .pixclk = 100800000,
+ .pll_div_regs = { 0x54, 0x30, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 102500000,
+ .pll_div_regs = { 0x55, 0x32, 0x8c, 0x05, 0x90, 0x4b },
+ }, {
+ .pixclk = 104750000,
+ .pll_div_regs = { 0x57, 0x32, 0x98, 0x07, 0x90, 0x49 },
+ }, {
+ .pixclk = 106500000,
+ .pll_div_regs = { 0x58, 0x32, 0x84, 0x03, 0x82, 0x41 },
+ }, {
+ .pixclk = 107000000,
+ .pll_div_regs = { 0x5a, 0x32, 0x89, 0x88, 0x80, 0x40 },
+ }, {
+ .pixclk = 108000000,
+ .pll_div_regs = { 0x5a, 0x30, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 108108000,
+ .pll_div_regs = { 0x5a, 0x32, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 118000000,
+ .pll_div_regs = { 0x62, 0x34, 0x95, 0x08, 0x80, 0x40 },
+ }, {
+ .pixclk = 118800000,
+ .pll_div_regs = { 0x63, 0x30, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 123000000,
+ .pll_div_regs = { 0x66, 0x34, 0x82, 0x01, 0x88, 0x45 },
+ }, {
+ .pixclk = 127000000,
+ .pll_div_regs = { 0x69, 0x34, 0x89, 0x08, 0x80, 0x40 },
+ }, {
+ .pixclk = 135000000,
+ .pll_div_regs = { 0x70, 0x34, 0x82, 0x01, 0x80, 0x40 },
+ }, {
+ .pixclk = 135580000,
+ .pll_div_regs = { 0x71, 0x39, 0xe9, 0x82, 0x9c, 0x5b },
+ }, {
+ .pixclk = 137520000,
+ .pll_div_regs = { 0x72, 0x38, 0x99, 0x10, 0x85, 0x41 },
+ }, {
+ .pixclk = 138750000,
+ .pll_div_regs = { 0x73, 0x35, 0x88, 0x05, 0x90, 0x4d },
+ }, {
+ .pixclk = 140000000,
+ .pll_div_regs = { 0x75, 0x36, 0xa7, 0x90, 0x80, 0x40 },
+ }, {
+ .pixclk = 144000000,
+ .pll_div_regs = { 0x78, 0x30, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 148352000,
+ .pll_div_regs = { 0x7b, 0x35, 0xdb, 0x39, 0x90, 0x45 },
+ }, {
+ .pixclk = 148500000,
+ .pll_div_regs = { 0x7b, 0x35, 0x84, 0x03, 0x90, 0x45 },
+ }, {
+ .pixclk = 154000000,
+ .pll_div_regs = { 0x40, 0x18, 0x83, 0x01, 0x00, 0x40 },
+ }, {
+ .pixclk = 157000000,
+ .pll_div_regs = { 0x41, 0x11, 0xa7, 0x14, 0x80, 0x40 },
+ }, {
+ .pixclk = 160000000,
+ .pll_div_regs = { 0x42, 0x12, 0xa1, 0x20, 0x80, 0x40 },
+ }, {
+ .pixclk = 162000000,
+ .pll_div_regs = { 0x43, 0x18, 0x8b, 0x08, 0x96, 0x55 },
+ }, {
+ .pixclk = 164000000,
+ .pll_div_regs = { 0x45, 0x11, 0x83, 0x82, 0x90, 0x4b },
+ }, {
+ .pixclk = 165000000,
+ .pll_div_regs = { 0x45, 0x11, 0x84, 0x81, 0x90, 0x4b },
+ }, {
+ .pixclk = 180000000,
+ .pll_div_regs = { 0x4b, 0x10, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 185625000,
+ .pll_div_regs = { 0x4e, 0x12, 0x9a, 0x95, 0x80, 0x40 },
+ }, {
+ .pixclk = 188000000,
+ .pll_div_regs = { 0x4e, 0x12, 0xa7, 0x10, 0x80, 0x40 },
+ }, {
+ .pixclk = 198000000,
+ .pll_div_regs = { 0x52, 0x12, 0x82, 0x01, 0x88, 0x47 },
+ }, {
+ .pixclk = 205000000,
+ .pll_div_regs = { 0x55, 0x12, 0x8c, 0x05, 0x90, 0x4b },
+ }, {
+ .pixclk = 209500000,
+ .pll_div_regs = { 0x57, 0x12, 0x98, 0x07, 0x90, 0x49 },
+ }, {
+ .pixclk = 213000000,
+ .pll_div_regs = { 0x58, 0x12, 0x84, 0x03, 0x82, 0x41 },
+ }, {
+ .pixclk = 216000000,
+ .pll_div_regs = { 0x5a, 0x10, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 216216000,
+ .pll_div_regs = { 0x5a, 0x12, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 237600000,
+ .pll_div_regs = { 0x63, 0x10, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 254000000,
+ .pll_div_regs = { 0x69, 0x14, 0x89, 0x08, 0x80, 0x40 },
+ }, {
+ .pixclk = 277500000,
+ .pll_div_regs = { 0x73, 0x15, 0x88, 0x05, 0x90, 0x4d },
+ }, {
+ .pixclk = 288000000,
+ .pll_div_regs = { 0x78, 0x10, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 297000000,
+ .pll_div_regs = { 0x7b, 0x15, 0x84, 0x03, 0x90, 0x45 },
+ },
+};
+
+struct reg_settings {
+ u8 reg;
+ u8 val;
+};
+
+static const struct reg_settings common_phy_cfg[] = {
+ { PHY_REG_00, 0x00 }, { PHY_REG_01, 0xd1 },
+ { PHY_REG_08, 0x4f }, { PHY_REG_09, 0x30 },
+ { PHY_REG_10, 0x33 }, { PHY_REG_11, 0x65 },
+ /* REG12 pixclk specific */
+ /* REG13 pixclk specific */
+ /* REG14 pixclk specific */
+ { PHY_REG_15, 0x80 }, { PHY_REG_16, 0x6c },
+ { PHY_REG_17, 0xf2 }, { PHY_REG_18, 0x67 },
+ { PHY_REG_19, 0x00 }, { PHY_REG_20, 0x10 },
+ /* REG21 pixclk specific */
+ { PHY_REG_22, 0x30 }, { PHY_REG_23, 0x32 },
+ { PHY_REG_24, 0x60 }, { PHY_REG_25, 0x8f },
+ { PHY_REG_26, 0x00 }, { PHY_REG_27, 0x00 },
+ { PHY_REG_28, 0x08 }, { PHY_REG_29, 0x00 },
+ { PHY_REG_30, 0x00 }, { PHY_REG_31, 0x00 },
+ { PHY_REG_32, 0x00 }, { PHY_REG_33, 0x80 },
+ { PHY_REG_34, 0x00 }, { PHY_REG_35, 0x00 },
+ { PHY_REG_36, 0x00 }, { PHY_REG_37, 0x00 },
+ { PHY_REG_38, 0x00 }, { PHY_REG_39, 0x00 },
+ { PHY_REG_40, 0x00 }, { PHY_REG_41, 0xe0 },
+ { PHY_REG_42, 0x83 }, { PHY_REG_43, 0x0f },
+ { PHY_REG_44, 0x3E }, { PHY_REG_45, 0xf8 },
+ { PHY_REG_46, 0x00 }, { PHY_REG_47, 0x00 }
+};
+
+struct fsl_samsung_hdmi_phy {
+ struct device *dev;
+ void __iomem *regs;
+ struct clk *apbclk;
+ struct clk *refclk;
+
+ /* clk provider */
+ struct clk_hw hw;
+ const struct phy_config *cur_cfg;
+};
+
+static inline struct fsl_samsung_hdmi_phy *
+to_fsl_samsung_hdmi_phy(struct clk_hw *hw)
+{
+ return container_of(hw, struct fsl_samsung_hdmi_phy, hw);
+}
+
+static void
+fsl_samsung_hdmi_phy_configure_pixclk(struct fsl_samsung_hdmi_phy *phy,
+ const struct phy_config *cfg)
+{
+ u8 div = 0x1;
+
+ switch (cfg->pixclk) {
+ case 22250000 ... 33750000:
+ div = 0xf;
+ break;
+ case 35000000 ... 40000000:
+ div = 0xb;
+ break;
+ case 43200000 ... 47500000:
+ div = 0x9;
+ break;
+ case 50349650 ... 63500000:
+ div = 0x7;
+ break;
+ case 67500000 ... 90000000:
+ div = 0x5;
+ break;
+ case 94000000 ... 148500000:
+ div = 0x3;
+ break;
+ case 154000000 ... 297000000:
+ div = 0x1;
+ break;
+ }
+
+ writeb(REG21_SEL_TX_CK_INV | FIELD_PREP(REG21_PMS_S_MASK, div),
+ phy->regs + PHY_REG_21);
+}
+
+static void
+fsl_samsung_hdmi_phy_configure_pll_lock_det(struct fsl_samsung_hdmi_phy *phy,
+ const struct phy_config *cfg)
+{
+ u32 pclk = cfg->pixclk;
+ u32 fld_tg_code;
+ u32 pclk_khz;
+ u8 div = 1;
+
+ switch (cfg->pixclk) {
+ case 22250000 ... 47500000:
+ div = 1;
+ break;
+ case 50349650 ... 99000000:
+ div = 2;
+ break;
+ case 100699300 ... 198000000:
+ div = 4;
+ break;
+ case 205000000 ... 297000000:
+ div = 8;
+ break;
+ }
+
+ writeb(FIELD_PREP(REG12_CK_DIV_MASK, ilog2(div)), phy->regs + PHY_REG_12);
+
+ /*
+ * Calculation for the frequency lock detector target code (fld_tg_code)
+ * is based on reference manual register description of PHY_REG13
+ * (13.10.3.1.14.2):
+ * 1st) Calculate int_pllclk which is determinded by FLD_CK_DIV
+ * 2nd) Increase resolution to avoid rounding issues
+ * 3th) Do the div (256 / Freq. of int_pllclk) * 24
+ * 4th) Reduce the resolution and always round up since the NXP
+ * settings rounding up always too. TODO: Check if that is
+ * correct.
+ */
+ pclk /= div;
+ pclk_khz = pclk / 1000;
+ fld_tg_code = 256 * 1000 * 1000 / pclk_khz * 24;
+ fld_tg_code = DIV_ROUND_UP(fld_tg_code, 1000);
+
+ /* FLD_TOL and FLD_RP_CODE taken from downstream driver */
+ writeb(FIELD_PREP(REG13_TG_CODE_LOW_MASK, fld_tg_code),
+ phy->regs + PHY_REG_13);
+ writeb(FIELD_PREP(REG14_TOL_MASK, 2) |
+ FIELD_PREP(REG14_RP_CODE_MASK, 2) |
+ FIELD_PREP(REG14_TG_CODE_HIGH_MASK, fld_tg_code >> 8),
+ phy->regs + PHY_REG_14);
+}
+
+static int fsl_samsung_hdmi_phy_configure(struct fsl_samsung_hdmi_phy *phy,
+ const struct phy_config *cfg)
+{
+ int i, ret;
+ u8 val;
+
+ /* HDMI PHY init */
+ writeb(REG33_FIX_DA, phy->regs + PHY_REG_33);
+
+ /* common PHY registers */
+ for (i = 0; i < ARRAY_SIZE(common_phy_cfg); i++)
+ writeb(common_phy_cfg[i].val, phy->regs + common_phy_cfg[i].reg);
+
+ /* set individual PLL registers PHY_REG2 ... PHY_REG7 */
+ for (i = 0; i < PHY_PLL_DIV_REGS_NUM; i++)
+ writeb(cfg->pll_div_regs[i], phy->regs + PHY_REG_02 + i * 4);
+
+ fsl_samsung_hdmi_phy_configure_pixclk(phy, cfg);
+ fsl_samsung_hdmi_phy_configure_pll_lock_det(phy, cfg);
+
+ writeb(REG33_FIX_DA | REG33_MODE_SET_DONE, phy->regs + PHY_REG_33);
+
+ ret = readb_poll_timeout(phy->regs + PHY_REG_34, val,
+ val & REG34_PLL_LOCK, 50, 20000);
+ if (ret)
+ dev_err(phy->dev, "PLL failed to lock\n");
+
+ return ret;
+}
+
+static unsigned long phy_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
+
+ if (!phy->cur_cfg)
+ return 74250000;
+
+ return phy->cur_cfg->pixclk;
+}
+
+static long phy_clk_round_rate(struct clk_hw *hw,
+ unsigned long rate, unsigned long *parent_rate)
+{
+ int i;
+
+ for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
+ if (phy_pll_cfg[i].pixclk <= rate)
+ return phy_pll_cfg[i].pixclk;
+
+ return -EINVAL;
+}
+
+static int phy_clk_set_rate(struct clk_hw *hw,
+ unsigned long rate, unsigned long parent_rate)
+{
+ struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
+ int i;
+
+ for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
+ if (phy_pll_cfg[i].pixclk <= rate)
+ break;
+
+ if (i < 0)
+ return -EINVAL;
+
+ phy->cur_cfg = &phy_pll_cfg[i];
+
+ return fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
+}
+
+static const struct clk_ops phy_clk_ops = {
+ .recalc_rate = phy_clk_recalc_rate,
+ .round_rate = phy_clk_round_rate,
+ .set_rate = phy_clk_set_rate,
+};
+
+static int phy_clk_register(struct fsl_samsung_hdmi_phy *phy)
+{
+ struct device *dev = phy->dev;
+ struct device_node *np = dev->of_node;
+ struct clk_init_data init;
+ const char *parent_name;
+ struct clk *phyclk;
+ int ret;
+
+ parent_name = __clk_get_name(phy->refclk);
+
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = 0;
+ init.name = "hdmi_pclk";
+ init.ops = &phy_clk_ops;
+
+ phy->hw.init = &init;
+
+ phyclk = devm_clk_register(dev, &phy->hw);
+ if (IS_ERR(phyclk))
+ return dev_err_probe(dev, PTR_ERR(phyclk),
+ "failed to register clock\n");
+
+ ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, phyclk);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to register clock provider\n");
+
+ return 0;
+}
+
+static int fsl_samsung_hdmi_phy_probe(struct platform_device *pdev)
+{
+ struct fsl_samsung_hdmi_phy *phy;
+ int ret;
+
+ phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, phy);
+ phy->dev = &pdev->dev;
+
+ phy->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(phy->regs))
+ return PTR_ERR(phy->regs);
+
+ phy->apbclk = devm_clk_get(phy->dev, "apb");
+ if (IS_ERR(phy->apbclk))
+ return dev_err_probe(phy->dev, PTR_ERR(phy->apbclk),
+ "failed to get apb clk\n");
+
+ phy->refclk = devm_clk_get(phy->dev, "ref");
+ if (IS_ERR(phy->refclk))
+ return dev_err_probe(phy->dev, PTR_ERR(phy->refclk),
+ "failed to get ref clk\n");
+
+ ret = clk_prepare_enable(phy->apbclk);
+ if (ret) {
+ dev_err(phy->dev, "failed to enable apbclk\n");
+ return ret;
+ }
+
+ pm_runtime_get_noresume(phy->dev);
+ pm_runtime_set_active(phy->dev);
+ pm_runtime_enable(phy->dev);
+
+ ret = phy_clk_register(phy);
+ if (ret) {
+ dev_err(&pdev->dev, "register clk failed\n");
+ goto register_clk_failed;
+ }
+
+ pm_runtime_put(phy->dev);
+
+ return 0;
+
+register_clk_failed:
+ clk_disable_unprepare(phy->apbclk);
+
+ return ret;
+}
+
+static int fsl_samsung_hdmi_phy_remove(struct platform_device *pdev)
+{
+ of_clk_del_provider(pdev->dev.of_node);
+
+ return 0;
+}
+
+static int __maybe_unused fsl_samsung_hdmi_phy_suspend(struct device *dev)
+{
+ struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(phy->apbclk);
+
+ return 0;
+}
+
+static int __maybe_unused fsl_samsung_hdmi_phy_resume(struct device *dev)
+{
+ struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
+ int ret = 0;
+
+ ret = clk_prepare_enable(phy->apbclk);
+ if (ret) {
+ dev_err(phy->dev, "failed to enable apbclk\n");
+ return ret;
+ }
+
+ if (phy->cur_cfg)
+ ret = fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
+
+ return ret;
+
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(fsl_samsung_hdmi_phy_pm_ops,
+ fsl_samsung_hdmi_phy_suspend,
+ fsl_samsung_hdmi_phy_resume, NULL);
+
+static const struct of_device_id fsl_samsung_hdmi_phy_of_match[] = {
+ {
+ .compatible = "fsl,imx8mp-hdmi-phy",
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, fsl_samsung_hdmi_phy_of_match);
+
+static struct platform_driver fsl_samsung_hdmi_phy_driver = {
+ .probe = fsl_samsung_hdmi_phy_probe,
+ .remove = fsl_samsung_hdmi_phy_remove,
+ .driver = {
+ .name = "fsl-samsung-hdmi-phy",
+ .of_match_table = fsl_samsung_hdmi_phy_of_match,
+ .pm = pm_ptr(&fsl_samsung_hdmi_phy_pm_ops),
+ },
+};
+module_platform_driver(fsl_samsung_hdmi_phy_driver);
+
+MODULE_AUTHOR("Sandor Yu <Sandor.yu@....com>");
+MODULE_DESCRIPTION("SAMSUNG HDMI 2.0 Transmitter PHY Driver");
+MODULE_LICENSE("GPL");
--
2.43.0
Powered by blists - more mailing lists