lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <271c7f14-abbe-4922-91ea-809e50be46cd@linaro.org>
Date: Mon, 19 Feb 2024 22:34:25 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: forbidden405@...look.com, Vinod Koul <vkoul@...nel.org>,
 Kishon Vijay Abraham I <kishon@...nel.org>, Rob Herring
 <robh+dt@...nel.org>, Krzysztof Kozlowski
 <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>,
 Jiancheng Xue <xuejiancheng@...ilicon.com>, Shawn Guo
 <shawn.guo@...aro.org>, Philipp Zabel <p.zabel@...gutronix.de>
Cc: linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
 linux-kernel@...r.kernel.org, Kishon Vijay Abraham I <kishon@...com>,
 David Yang <mmyangfl@...il.com>
Subject: Re: [PATCH RFC v3 4/5] phy: hisilicon: hisi-inno-phy: add support for
 Hi3798MV200 INNO PHY

On 19/02/2024 22:28, Yang Xiwen via B4 Relay wrote:
> From: Yang Xiwen <forbidden405@...look.com>
> 
> Direct MMIO resgiter access is used by Hi3798MV200. For other models,
> of_iomap() returns 0 due to insufficient length. So they are unaffected.
> 
> Also Hi3798MV200 INNO PHY has an extra reset required to be deasserted,
> switch to reset_control_bulk_() APIs to resolve this.
> 
> Signed-off-by: Yang Xiwen <forbidden405@...look.com>
> ---
>  drivers/phy/hisilicon/phy-hisi-inno-usb2.c | 65 ++++++++++++++++++------------
>  1 file changed, 39 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
> index b7e740eb4752..5175e5a351ac 100644
> --- a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
> +++ b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
> @@ -10,6 +10,7 @@
>  #include <linux/io.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> +#include <linux/of_address.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
>  #include <linux/reset.h>
> @@ -43,6 +44,7 @@
>  #define PHY_CLK_ENABLE		BIT(2)
>  
>  struct hisi_inno_phy_port {
> +	void __iomem *base;
>  	struct reset_control *utmi_rst;
>  	struct hisi_inno_phy_priv *priv;
>  };
> @@ -50,7 +52,7 @@ struct hisi_inno_phy_port {
>  struct hisi_inno_phy_priv {
>  	void __iomem *mmio;
>  	struct clk *ref_clk;
> -	struct reset_control *por_rst;
> +	struct reset_control *rsts;

This does not look related to this patch at all.

>  	unsigned int type;
>  	struct hisi_inno_phy_port ports[INNO_PHY_PORT_NUM];
>  };



Best regards,
Krzysztof


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ