linux-kernel - Re: [PATCH 07/17] clk: renesas: rzg2l: Extend power domain support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4098873b-a7e7-4c88-9af2-01f3c76424ab@tuxon.dev>
Date: Mon, 19 Feb 2024 10:24:53 +0200
From: claudiu beznea <claudiu.beznea@...on.dev>
To: Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: mturquette@...libre.com, sboyd@...nel.org, robh@...nel.org,
 krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
 magnus.damm@...il.com, paul.walmsley@...ive.com, palmer@...belt.com,
 aou@...s.berkeley.edu, linux-renesas-soc@...r.kernel.org,
 linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
 linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org,
 Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: Re: [PATCH 07/17] clk: renesas: rzg2l: Extend power domain support



On 16.02.2024 16:08, Geert Uytterhoeven wrote:
> Hi Claudiu,
> 
> On Thu, Feb 8, 2024 at 1:44 PM Claudiu <claudiu.beznea@...on.dev> wrote:
>> From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
>>
>> RZ/{G2L, V2L, G3S}-based CPG versions have support for saving extra
>> power when clocks are disabled by activating module standby. This is done
>> through MSTOP-specific registers that are part of CPG. Each individual
>> module has one or more bits associated with one MSTOP register (see table
>> "Registers for Module Standby Mode" from HW manuals). Hardware manual
>> associates modules' clocks with one or more MSTOP bits. There are 3 mappings
>> available (identified by researching RZ/G2L, RZ/G3S, RZ/V2L HW manuals):
>>
>> case 1: N clocks mapped to N MSTOP bits (with N={0, ..., X})
>> case 2: N clocks mapped to 1 MSTOP bit  (with N={0, ..., X})
>> case 3: N clocks mapped to M MSTOP bits (with N={0, ..., X}, M={0, ..., Y})
>>
>> Case 3 has been currently identified on RZ/V2L for the VCPL4 module.
>>
>> To cover all three cases, the individual platform drivers will provide to
>> clock driver MSTOP register offset and associated bits in this register
>> as a bitmask and the clock driver will apply this bitmask to proper
>> MSTOP register.
>>
>> Apart from MSTOP support, RZ/G3S can save more power by powering down the
>> individual IPs (after MSTOP has been set) if proper bits in
>> CPG_PWRDN_IP{1,2} registers are set.
>>
>> The MSTOP and IP power down support were implemented through power
>> domains. Platform-specific clock drivers will register an array of
>> type struct rzg2l_cpg_pm_domain_init_data, which will be used to
>> instantiate properly the power domains.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
> 
> Thanks for your patch!
> 
>> --- a/drivers/clk/renesas/rzg2l-cpg.c
>> +++ b/drivers/clk/renesas/rzg2l-cpg.c
>> @@ -1559,9 +1556,34 @@ static bool rzg2l_cpg_is_pm_clk(struct rzg2l_cpg_priv *priv,
>>         return true;
>>  }
[ ... ]

> 
>> @@ -234,6 +246,54 @@ struct rzg2l_reset {
>>  #define DEF_RST(_id, _off, _bit)       \
>>         DEF_RST_MON(_id, _off, _bit, -1)
>>
>> +/**
>> + * struct rzg2l_cpg_pm_domain_conf - PM domain configuration data structure
>> + * @mstop: MSTOP configuration (MSB = register offset, LSB = bitmask)
>> + * @pwrdn: PWRDN configuration (MSB = register offset, LSB = register bit)
>> + */
>> +struct rzg2l_cpg_pm_domain_conf {
>> +       u32 mstop;
>> +       u32 pwrdn;
> 
> Why not
> 
>     u16 mstop_off;
>     u16 mstop_mask;
>     u16 pwrdn_off;
>     u16 pwrdn_mask;
> 
> so you can drop the MSTOP*() and PWRDN*() macros below?

I did it like this to align with the already existing approach for this
kind of things available in this driver. I can do it as you proposed.

For the rest of your comments on this patch: I agree and will adjust the
patch in the next version.

Thank you,
Claudiu Beznea