linux-kernel - [PATCH v2 2/2] arm64: dts: ti: k3-j722s-evm: Enable OSPI NOR support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240219090435.934383-3-vaishnav.a@ti.com>
Date: Mon, 19 Feb 2024 14:34:35 +0530
From: Vaishnav Achath <vaishnav.a@...com>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <vaishnav.a@...com>, <u-kumar1@...com>,
        <s-vadapalli@...com>
Subject: [PATCH v2 2/2] arm64: dts: ti: k3-j722s-evm: Enable OSPI NOR support

J722S EVM has S28HS512T 64 MiB Octal SPI NOR flash connected
to the OSPI interface, add support for the flash and describe
the partition information as per bootloader.

Signed-off-by: Vaishnav Achath <vaishnav.a@...com>
---

V1->V2:
  * Update comments indicating PAD numbers. 

 arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 79 +++++++++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index 9e12a6e9111f..cee3a8661d5e 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -169,6 +169,23 @@ J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */
 		>;
 	};
 
+	ospi0_pins_default: ospi0-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x0000, PIN_OUTPUT, 0) /* (L24) OSPI0_CLK */
+			J722S_IOPAD(0x002c, PIN_OUTPUT, 0) /* (K26) OSPI0_CSn0 */
+			J722S_IOPAD(0x000c, PIN_INPUT, 0) /* (K27) OSPI0_D0 */
+			J722S_IOPAD(0x0010, PIN_INPUT, 0) /* (L27) OSPI0_D1 */
+			J722S_IOPAD(0x0014, PIN_INPUT, 0) /* (L26) OSPI0_D2 */
+			J722S_IOPAD(0x0018, PIN_INPUT, 0) /* (L25) OSPI0_D3 */
+			J722S_IOPAD(0x001c, PIN_INPUT, 0) /* (L21) OSPI0_D4 */
+			J722S_IOPAD(0x0020, PIN_INPUT, 0) /* (M26) OSPI0_D5 */
+			J722S_IOPAD(0x0024, PIN_INPUT, 0) /* (N27) OSPI0_D6 */
+			J722S_IOPAD(0x0028, PIN_INPUT, 0) /* (M27) OSPI0_D7 */
+			J722S_IOPAD(0x0008, PIN_INPUT, 0) /* (L22) OSPI0_DQS */
+		>;
+		bootph-all;
+	};
+
 	rgmii1_pins_default: rgmii1-default-pins {
 		pinctrl-single,pins = <
 			J722S_IOPAD(0x014c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */
@@ -290,6 +307,68 @@ exp1: gpio@23 {
 	};
 };
 
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+		bootph-all;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x00 0x80000>;
+			};
+
+			partition@...00 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@...000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@...000 {
+				label = "ospi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@...000 {
+				label = "ospi.env.backup";
+				reg = <0x6c0000 0x40000>;
+			};
+
+			partition@...000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@...0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+
+};
+
 &sdhci1 {
 	/* SD/MMC */
 	vmmc-supply = <&vdd_mmc1>;
-- 
2.34.1