| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240219032741.18387-1-changhuang.liang@starfivetech.com>
Date: Sun, 18 Feb 2024 19:27:41 -0800
From: Changhuang Liang <changhuang.liang@...rfivetech.com>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Emil Renner Berthing <kernel@...il.dk>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>
Cc: Jack Zhu <jack.zhu@...rfivetech.com>,
Changhuang Liang <changhuang.liang@...rfivetech.com>,
linux-kernel@...r.kernel.org,
linux-riscv@...ts.infradead.org,
devicetree@...r.kernel.org
Subject: [v3] riscv: dts: starfive: jh7110: Add camera subsystem nodes
Add camera subsystem nodes for the StarFive JH7110 SoC. They contain the
dphy-rx, csi2rx, camss nodes.
Signed-off-by: Changhuang Liang <changhuang.liang@...rfivetech.com>
---
.../jh7110-starfive-visionfive-2.dtsi | 49 ++++++++++++++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 67 +++++++++++++++++++
2 files changed, 116 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index b89e9791efa7..737ee97a3577 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -125,6 +125,55 @@ &tdm_ext {
clock-frequency = <49152000>;
};
+&camss {
+ assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
+ <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
+ assigned-clock-rates = <49500000>, <198000000>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+
+ camss_from_csi2rx: endpoint {
+ remote-endpoint = <&csi2rx_to_camss>;
+ };
+ };
+ };
+};
+
+&csi2rx {
+ assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
+ assigned-clock-rates = <297000000>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ /* remote MIPI sensor endpoint */
+ };
+
+ port@1 {
+ reg = <1>;
+
+ csi2rx_to_camss: endpoint {
+ remote-endpoint = <&camss_from_csi2rx>;
+ };
+ };
+ };
+};
+
&gmac0 {
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 45213cdf50dc..6ea1c3f5dded 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -1104,6 +1104,32 @@ pwrc: power-controller@...30000 {
#power-domain-cells = <1>;
};
+ csi2rx: csi@...00000 {
+ compatible = "starfive,jh7110-csi2rx", "cdns,csi2rx";
+ reg = <0x0 0x19800000 0x0 0x10000>;
+ clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>,
+ <&ispcrg JH7110_ISPCLK_VIN_APB>,
+ <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF0>,
+ <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF1>,
+ <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF2>,
+ <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF3>;
+ clock-names = "sys_clk", "p_clk",
+ "pixel_if0_clk", "pixel_if1_clk",
+ "pixel_if2_clk", "pixel_if3_clk";
+ resets = <&ispcrg JH7110_ISPRST_VIN_SYS>,
+ <&ispcrg JH7110_ISPRST_VIN_APB>,
+ <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF0>,
+ <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF1>,
+ <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF2>,
+ <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF3>;
+ reset-names = "sys", "reg_bank",
+ "pixel_if0", "pixel_if1",
+ "pixel_if2", "pixel_if3";
+ phys = <&csi_phy>;
+ phy-names = "dphy";
+ status = "disabled";
+ };
+
ispcrg: clock-controller@...10000 {
compatible = "starfive,jh7110-ispcrg";
reg = <0x0 0x19810000 0x0 0x10000>;
@@ -1121,6 +1147,47 @@ ispcrg: clock-controller@...10000 {
power-domains = <&pwrc JH7110_PD_ISP>;
};
+ csi_phy: phy@...20000 {
+ compatible = "starfive,jh7110-dphy-rx";
+ reg = <0x0 0x19820000 0x0 0x10000>;
+ clocks = <&ispcrg JH7110_ISPCLK_M31DPHY_CFG_IN>,
+ <&ispcrg JH7110_ISPCLK_M31DPHY_REF_IN>,
+ <&ispcrg JH7110_ISPCLK_M31DPHY_TX_ESC_LAN0>;
+ clock-names = "cfg", "ref", "tx";
+ resets = <&ispcrg JH7110_ISPRST_M31DPHY_HW>,
+ <&ispcrg JH7110_ISPRST_M31DPHY_B09_AON>;
+ power-domains = <&aon_syscon JH7110_AON_PD_DPHY_RX>;
+ #phy-cells = <0>;
+ };
+
+ camss: isp@...40000 {
+ compatible = "starfive,jh7110-camss";
+ reg = <0x0 0x19840000 0x0 0x10000>,
+ <0x0 0x19870000 0x0 0x30000>;
+ reg-names = "syscon", "isp";
+ clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
+ <&ispcrg JH7110_ISPCLK_ISPV2_TOP_WRAPPER_C>,
+ <&ispcrg JH7110_ISPCLK_DVP_INV>,
+ <&ispcrg JH7110_ISPCLK_VIN_P_AXI_WR>,
+ <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>,
+ <&syscrg JH7110_SYSCLK_ISP_TOP_CORE>,
+ <&syscrg JH7110_SYSCLK_ISP_TOP_AXI>;
+ clock-names = "apb_func", "wrapper_clk_c", "dvp_inv",
+ "axiwr", "mipi_rx0_pxl", "ispcore_2x",
+ "isp_axi";
+ resets = <&ispcrg JH7110_ISPRST_ISPV2_TOP_WRAPPER_P>,
+ <&ispcrg JH7110_ISPRST_ISPV2_TOP_WRAPPER_C>,
+ <&ispcrg JH7110_ISPRST_VIN_P_AXI_RD>,
+ <&ispcrg JH7110_ISPRST_VIN_P_AXI_WR>,
+ <&syscrg JH7110_SYSRST_ISP_TOP>,
+ <&syscrg JH7110_SYSRST_ISP_TOP_AXI>;
+ reset-names = "wrapper_p", "wrapper_c", "axird",
+ "axiwr", "isp_top_n", "isp_top_axi";
+ power-domains = <&pwrc JH7110_PD_ISP>;
+ interrupts = <92>, <87>, <90>, <88>;
+ status = "disabled";
+ };
+
voutcrg: clock-controller@...c0000 {
compatible = "starfive,jh7110-voutcrg";
reg = <0x0 0x295c0000 0x0 0x10000>;
--
2.25.1
Powered by blists - more mailing lists