| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240220161924.3871774-15-Frank.Li@nxp.com>
Date: Tue, 20 Feb 2024 11:19:24 -0500
From: Frank Li <Frank.Li@....com>
To: lpieralisi@...nel.org
Cc: Frank.li@....com,
bhelgaas@...gle.com,
cassel@...nel.org,
conor+dt@...nel.org,
devicetree@...r.kernel.org,
festevam@...il.com,
helgaas@...nel.org,
hongxing.zhu@....com,
imx@...ts.linux.dev,
kernel@...gutronix.de,
krzysztof.kozlowski+dt@...aro.org,
krzysztof.kozlowski@...aro.org,
kw@...ux.com,
l.stach@...gutronix.de,
linux-arm-kernel@...ts.infradead.org,
linux-imx@....com,
linux-kernel@...r.kernel.org,
linux-pci@...r.kernel.org,
manivannan.sadhasivam@...aro.org,
robh@...nel.org,
s.hauer@...gutronix.de,
shawnguo@...nel.org
Subject: [PATCH v11 14/14] PCI: imx6: Add iMX95 Endpoint (EP) support
Add iMX95 EP support and add 64bit address support. Internal bus bridge for
PCI support 64bit dma address in iMX95. Hence, call
dma_set_mask_and_coherent() to set 64 bit DMA mask.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Signed-off-by: Frank Li <Frank.Li@....com>
---
Notes:
Change from v10 to v11
- rebase to linux-pci/endpoint.
- move dma_set_mask_and_coherent() to imx6_add_pcie_ep() according to Robin
Murphy's suggestion.
Change from v9 to v10
- using if (device_property_match_string(dev, "reg-names", "dbi2")) instead of
if (imx6_pcie->drvdata->variant == IMX95_EP)
- so other platform can stat use "dbi2" in dts.
@Mani: I change to check device_property_match_string(), so I can update
other platform dts file, It should be better than
imx6_pcie->drvdata->variant == IMX95_EP
Change from v8 to v9
- update fixme comments
- update BAR1 comments
- Add mani's review tag
Change from v7 to v8
- Update commit message
- Using Fixme
- Update clks_cnts by ARRAY_SIZE
Change from v4 to v7
- none
Change from v3 to v4
- change align to 4k for imx95
Change from v1 to v3
- new patches at v3
drivers/pci/controller/dwc/pci-imx6.c | 47 +++++++++++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index b714edac6d566..9c2ad803e1dbd 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -75,6 +75,7 @@ enum imx6_pcie_variants {
IMX8MQ_EP,
IMX8MM_EP,
IMX8MP_EP,
+ IMX95_EP,
};
#define IMX6_PCIE_FLAG_IMX6_PHY BIT(0)
@@ -84,6 +85,7 @@ enum imx6_pcie_variants {
#define IMX6_PCIE_FLAG_HAS_APP_RESET BIT(4)
#define IMX6_PCIE_FLAG_HAS_PHY_RESET BIT(5)
#define IMX6_PCIE_FLAG_HAS_SERDES BIT(6)
+#define IMX6_PCIE_FLAG_SUPPORT_64BIT BIT(7)
#define imx6_check_flag(pci, val) (pci->drvdata->flags & val)
@@ -616,6 +618,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
break;
case IMX7D:
case IMX95:
+ case IMX95_EP:
break;
case IMX8MM:
case IMX8MM_EP:
@@ -1051,6 +1054,23 @@ static const struct pci_epc_features imx8m_pcie_epc_features = {
.align = SZ_64K,
};
+/*
+ * BAR# | Default BAR enable | Default BAR Type | Default BAR Size | BAR Sizing Scheme
+ * ================================================================================================
+ * BAR0 | Enable | 64-bit | 1 MB | Programmable Size
+ * BAR1 | Disable | 32-bit | 64 KB | Fixed Size
+ * BAR1 should be disabled if BAR0 is 64bit.
+ * BAR2 | Enable | 32-bit | 1 MB | Programmable Size
+ * BAR3 | Enable | 32-bit | 64 KB | Programmable Size
+ * BAR4 | Enable | 32-bit | 1M | Programmable Size
+ * BAR5 | Enable | 32-bit | 64 KB | Programmable Size
+ */
+static const struct pci_epc_features imx95_pcie_epc_features = {
+ .msi_capable = true,
+ .bar[BAR_1] = { .type = BAR_FIXED, .fixed_size = SZ_64K, },
+ .align = SZ_4K,
+};
+
static const struct pci_epc_features*
imx6_pcie_ep_get_features(struct dw_pcie_ep *ep)
{
@@ -1093,6 +1113,18 @@ static int imx6_add_pcie_ep(struct imx6_pcie *imx6_pcie,
pci->dbi_base2 = pci->dbi_base + pcie_dbi2_offset;
+ /*
+ * FIXME: Ideally, dbi2 base address should come from DT. But since only IMX95 is defining
+ * "dbi2" in DT, "dbi_base2" is set to NULL here for that platform alone so that the DWC
+ * core code can fetch that from DT. But once all platform DTs were fixed, this and the
+ * above "dbi_base2" setting should be removed.
+ */
+ if (device_property_match_string(dev, "reg-names", "dbi2") >= 0)
+ pci->dbi_base2 = NULL;
+
+ if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_SUPPORT_64BIT))
+ dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
+
ret = dw_pcie_ep_init(ep);
if (ret) {
dev_err(dev, "failed to initialize endpoint\n");
@@ -1562,6 +1594,20 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.epc_features = &imx8m_pcie_epc_features,
},
+ [IMX95_EP] = {
+ .variant = IMX95_EP,
+ .flags = IMX6_PCIE_FLAG_HAS_SERDES |
+ IMX6_PCIE_FLAG_SUPPORT_64BIT,
+ .clk_names = imx8mq_clks,
+ .clks_cnt = ARRAY_SIZE(imx8mq_clks),
+ .ltssm_off = IMX95_PE0_GEN_CTRL_3,
+ .ltssm_mask = IMX95_PCIE_LTSSM_EN,
+ .mode_off[0] = IMX95_PE0_GEN_CTRL_1,
+ .mode_mask[0] = IMX95_PCIE_DEVICE_TYPE,
+ .init_phy = imx95_pcie_init_phy,
+ .epc_features = &imx95_pcie_epc_features,
+ .mode = DW_PCIE_EP_TYPE,
+ },
};
static const struct of_device_id imx6_pcie_of_match[] = {
@@ -1576,6 +1622,7 @@ static const struct of_device_id imx6_pcie_of_match[] = {
{ .compatible = "fsl,imx8mq-pcie-ep", .data = &drvdata[IMX8MQ_EP], },
{ .compatible = "fsl,imx8mm-pcie-ep", .data = &drvdata[IMX8MM_EP], },
{ .compatible = "fsl,imx8mp-pcie-ep", .data = &drvdata[IMX8MP_EP], },
+ { .compatible = "fsl,imx95-pcie-ep", .data = &drvdata[IMX95_EP], },
{},
};
--
2.34.1
Powered by blists - more mailing lists