[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240221-x1e80100-display-refactor-connector-v1-2-86c0e1ebd5ec@linaro.org>
Date: Wed, 21 Feb 2024 00:50:32 +0200
From: Abel Vesa <abel.vesa@...aro.org>
To: Rob Clark <robdclark@...il.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>, Sean Paul <sean@...rly.run>,
Marijn Suijten <marijn.suijten@...ainline.org>,
David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Kuogee Hsieh <quic_khsieh@...cinc.com>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Johan Hovold <johan@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Abel Vesa <abel.vesa@...aro.org>
Subject: [PATCH RFC 2/3] drm/msm/dp: Add support for setting the eDP mode
from devicetree
Instead of relying on different compatibles for eDP and DP, use
the is-edp property from DT to figure out the connector type and
then pass on that information to the PHY.
Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
drivers/gpu/drm/msm/dp/dp_ctrl.c | 11 +++++++++++
drivers/gpu/drm/msm/dp/dp_ctrl.h | 1 +
drivers/gpu/drm/msm/dp/dp_display.c | 19 ++++++++++++++++---
3 files changed, 28 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index 320f17fce9a6..bd81cc6bd5e3 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1533,6 +1533,17 @@ void dp_ctrl_set_psr(struct dp_ctrl *dp_ctrl, bool enter)
}
}
+int dp_ctrl_phy_set_mode(struct dp_ctrl *dp_ctrl, int submode)
+{
+ struct dp_ctrl_private *ctrl;
+ struct phy *phy;
+
+ ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+ phy = ctrl->phy;
+
+ return phy_set_mode_ext(phy, PHY_MODE_DP, submode);
+}
+
void dp_ctrl_phy_init(struct dp_ctrl *dp_ctrl)
{
struct dp_ctrl_private *ctrl;
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h b/drivers/gpu/drm/msm/dp/dp_ctrl.h
index fa014cee7e21..a10d1b19d172 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.h
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h
@@ -32,6 +32,7 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
struct phy *phy);
void dp_ctrl_reset_irq_ctrl(struct dp_ctrl *dp_ctrl, bool enable);
+int dp_ctrl_phy_set_mode(struct dp_ctrl *dp_ctrl, int mode);
void dp_ctrl_phy_init(struct dp_ctrl *dp_ctrl);
void dp_ctrl_phy_exit(struct dp_ctrl *dp_ctrl);
void dp_ctrl_irq_phy_exit(struct dp_ctrl *dp_ctrl);
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index e4433891becb..9e58285d4ec6 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -1229,6 +1229,7 @@ static int dp_display_probe(struct platform_device *pdev)
int rc = 0;
struct dp_display_private *dp;
const struct msm_dp_desc *desc;
+ bool is_edp = false;
if (!pdev || !pdev->dev.of_node) {
DRM_ERROR("pdev not found\n");
@@ -1243,13 +1244,19 @@ static int dp_display_probe(struct platform_device *pdev)
if (!desc)
return -EINVAL;
+ if (dp->dp_display.connector_type == DRM_MODE_CONNECTOR_eDP ||
+ of_property_read_bool(pdev->dev.of_node, "is-edp"))
+ is_edp = true;
+
+ dp->dp_display.is_edp = is_edp;
dp->dp_display.pdev = pdev;
dp->name = "drm_dp";
dp->id = desc->id;
- dp->dp_display.connector_type = desc->connector_type;
dp->wide_bus_en = desc->wide_bus_en;
- dp->dp_display.is_edp =
- (dp->dp_display.connector_type == DRM_MODE_CONNECTOR_eDP);
+
+ dp->dp_display.connector_type = is_edp ?
+ DRM_MODE_CONNECTOR_eDP :
+ DRM_MODE_CONNECTOR_DisplayPort;
rc = dp_init_sub_modules(dp);
if (rc) {
@@ -1257,6 +1264,12 @@ static int dp_display_probe(struct platform_device *pdev)
return -EPROBE_DEFER;
}
+ rc = dp_ctrl_phy_set_mode(dp->ctrl, is_edp ? PHY_SUBMODE_EDP : PHY_SUBMODE_DP);
+ if (rc) {
+ DRM_ERROR("setting PHY submode failed\n");
+ goto err;
+ }
+
/* setup event q */
mutex_init(&dp->event_mutex);
init_waitqueue_head(&dp->event_q);
--
2.34.1
Powered by blists - more mailing lists