linux-kernel - Re: [PATCH v2 3/5] PCI: dwc: Pass the eDMA mapping format flag directly from glue drivers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <17ef7cf1-62d8-41f8-9e52-3ce972708a72@ti.com>
Date: Tue, 20 Feb 2024 17:56:48 +0530
From: Siddharth Vadapalli <s-vadapalli@...com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
CC: Jingoo Han <jingoohan1@...il.com>,
        Gustavo Pimentel
	<gustavo.pimentel@...opsys.com>,
        Lorenzo Pieralisi <lpieralisi@...nel.org>,
        Krzysztof Wilczyński <kw@...ux.com>,
        Rob Herring
	<robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
        Marek Vasut
	<marek.vasut+renesas@...il.com>,
        Yoshihiro Shimoda
	<yoshihiro.shimoda.uh@...esas.com>,
        Kishon Vijay Abraham I
	<kishon@...nel.org>,
        Serge Semin <fancer.lancer@...il.com>, <linux-pci@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linux-renesas-soc@...r.kernel.org>,
        <linux-arm-msm@...r.kernel.org>, <mhi@...ts.linux.dev>,
        <s-vadapalli@...com>
Subject: Re: [PATCH v2 3/5] PCI: dwc: Pass the eDMA mapping format flag
 directly from glue drivers

On 24/02/16 11:04PM, Manivannan Sadhasivam wrote:
> Instead of maintaining a separate capability for glue drivers that cannot
> support auto detection of the eDMA mapping format, let's pass the mapping
> format directly from them.
> 
> This will simplify the code and also allow adding HDMA support that also
> doesn't support auto detection of mapping format.
> 
> Suggested-by: Serge Semin <fancer.lancer@...il.com>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>

Reviewed-by: Siddharth Vadapalli <s-vadapalli@...com>

Regards,
Siddharth.
> ---
>  drivers/pci/controller/dwc/pcie-designware.c | 16 +++++++++-------
>  drivers/pci/controller/dwc/pcie-designware.h |  5 ++---
>  drivers/pci/controller/dwc/pcie-rcar-gen4.c  |  2 +-
>  3 files changed, 12 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index d07747b75947..54ecd536756d 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -894,18 +894,20 @@ static int dw_pcie_edma_find_mf(struct dw_pcie *pci)
>  {
>  	u32 val;
>  
> +	/*
> +	 * Bail out finding the mapping format if it is already set by the glue
> +	 * driver. Also ensure that the edma.reg_base is pointing to a valid
> +	 * memory region.
> +	 */
> +	if (pci->edma.mf != EDMA_MF_EDMA_LEGACY)
> +		return pci->edma.reg_base ? 0 : -ENODEV;
> +
>  	/*
>  	 * Indirect eDMA CSRs access has been completely removed since v5.40a
>  	 * thus no space is now reserved for the eDMA channels viewport and
>  	 * former DMA CTRL register is no longer fixed to FFs.
> -	 *
> -	 * Note that Renesas R-Car S4-8's PCIe controllers for unknown reason
> -	 * have zeros in the eDMA CTRL register even though the HW-manual
> -	 * explicitly states there must FFs if the unrolled mapping is enabled.
> -	 * For such cases the low-level drivers are supposed to manually
> -	 * activate the unrolled mapping to bypass the auto-detection procedure.
>  	 */
> -	if (dw_pcie_ver_is_ge(pci, 540A) || dw_pcie_cap_is(pci, EDMA_UNROLL))
> +	if (dw_pcie_ver_is_ge(pci, 540A))
>  		val = 0xFFFFFFFF;
>  	else
>  		val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL);
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index 26dae4837462..995805279021 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -51,9 +51,8 @@
>  
>  /* DWC PCIe controller capabilities */
>  #define DW_PCIE_CAP_REQ_RES		0
> -#define DW_PCIE_CAP_EDMA_UNROLL		1
> -#define DW_PCIE_CAP_IATU_UNROLL		2
> -#define DW_PCIE_CAP_CDM_CHECK		3
> +#define DW_PCIE_CAP_IATU_UNROLL		1
> +#define DW_PCIE_CAP_CDM_CHECK		2
>  
>  #define dw_pcie_cap_is(_pci, _cap) \
>  	test_bit(DW_PCIE_CAP_ ## _cap, &(_pci)->caps)
> diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4.c b/drivers/pci/controller/dwc/pcie-rcar-gen4.c
> index e9166619b1f9..3c535ef5ea91 100644
> --- a/drivers/pci/controller/dwc/pcie-rcar-gen4.c
> +++ b/drivers/pci/controller/dwc/pcie-rcar-gen4.c
> @@ -255,7 +255,7 @@ static struct rcar_gen4_pcie *rcar_gen4_pcie_alloc(struct platform_device *pdev)
>  	rcar->dw.ops = &dw_pcie_ops;
>  	rcar->dw.dev = dev;
>  	rcar->pdev = pdev;
> -	dw_pcie_cap_set(&rcar->dw, EDMA_UNROLL);
> +	rcar->dw.edma.mf = EDMA_MF_EDMA_UNROLL;
>  	dw_pcie_cap_set(&rcar->dw, REQ_RES);
>  	platform_set_drvdata(pdev, rcar);
>  
> 
> -- 
> 2.25.1
> 
>