| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240221-mbly-clk-v7-5-31d4ce3630c3@bootlin.com> Date: Wed, 21 Feb 2024 19:22:13 +0100 From: Théo Lebrun <theo.lebrun@...tlin.com> To: Gregory CLEMENT <gregory.clement@...tlin.com>, Michael Turquette <mturquette@...libre.com>, Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh+dt@...nel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>, Thomas Bogendoerfer <tsbogend@...ha.franken.de>, Linus Walleij <linus.walleij@...aro.org>, Rafał Miłecki <rafal@...ecki.pl>, Philipp Zabel <p.zabel@...gutronix.de> Cc: Vladimir Kondratiev <vladimir.kondratiev@...ileye.com>, linux-mips@...r.kernel.org, linux-clk@...r.kernel.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, Thomas Petazzoni <thomas.petazzoni@...tlin.com>, Tawfik Bayouk <tawfik.bayouk@...ileye.com>, linux-gpio@...r.kernel.org, Théo Lebrun <theo.lebrun@...tlin.com>, Rob Herring <robh@...nel.org> Subject: [PATCH v7 05/14] dt-bindings: pinctrl: mobileye,eyeq5-pinctrl: add bindings Add dt-schema type bindings for the Mobileye EyeQ5 pin controller. Reviewed-by: Rob Herring <robh@...nel.org> Reviewed-by: Linus Walleij <linus.walleij@...aro.org> Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com> --- .../bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml | 242 +++++++++++++++++++++ 1 file changed, 242 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml new file mode 100644 index 000000000000..5f00604bf48c --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml @@ -0,0 +1,242 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mobileye,eyeq5-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mobileye EyeQ5 pin controller + +description: > + The EyeQ5 pin controller handles the two pin banks of the system. It belongs + to a system-controller block called OLB. + + Pin control is about bias (pull-down, pull-up), drive strength and muxing. Pin + muxing supports two functions for each pin: first is GPIO, second is + pin-dependent. + + Pins and groups are bijective. + +maintainers: + - Grégory Clement <gregory.clement@...tlin.com> + - Théo Lebrun <theo.lebrun@...tlin.com> + - Vladimir Kondratiev <vladimir.kondratiev@...ileye.com> + +$ref: pinctrl.yaml# + +properties: + compatible: + enum: + - mobileye,eyeq5-pinctrl + + reg: + maxItems: 1 + +patternProperties: + "-pins?$": + type: object + description: Pin muxing configuration. + $ref: pinmux-node.yaml# + additionalProperties: false + properties: + pins: true + function: + enum: [gpio, + # Bank A + timer0, timer1, timer2, timer5, uart0, uart1, can0, can1, spi0, + spi1, refclk0, + # Bank B + timer3, timer4, timer6, uart2, can2, spi2, spi3, mclk0] + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + required: + - pins + - function + allOf: + - if: + properties: + function: + const: gpio + then: + properties: + pins: + items: # PA0 - PA28, PB0 - PB22 + pattern: '^(P(A|B)1?[0-9]|PA2[0-8]|PB2[0-2])$' + - if: + properties: + function: + const: timer0 + then: + properties: + pins: + items: + enum: [PA0, PA1] + - if: + properties: + function: + const: timer1 + then: + properties: + pins: + items: + enum: [PA2, PA3] + - if: + properties: + function: + const: timer2 + then: + properties: + pins: + items: + enum: [PA4, PA5] + - if: + properties: + function: + const: timer5 + then: + properties: + pins: + items: + enum: [PA6, PA7, PA8, PA9] + - if: + properties: + function: + const: uart0 + then: + properties: + pins: + items: + enum: [PA10, PA11] + - if: + properties: + function: + const: uart1 + then: + properties: + pins: + items: + enum: [PA12, PA13] + - if: + properties: + function: + const: can0 + then: + properties: + pins: + items: + enum: [PA14, PA15] + - if: + properties: + function: + const: can1 + then: + properties: + pins: + items: + enum: [PA16, PA17] + - if: + properties: + function: + const: spi0 + then: + properties: + pins: + items: + enum: [PA18, PA19, PA20, PA21, PA22] + - if: + properties: + function: + const: spi1 + then: + properties: + pins: + items: + enum: [PA23, PA24, PA25, PA26, PA27] + - if: + properties: + function: + const: refclk0 + then: + properties: + pins: + items: + enum: [PA28] + - if: + properties: + function: + const: timer3 + then: + properties: + pins: + items: + enum: [PB0, PB1] + - if: + properties: + function: + const: timer4 + then: + properties: + pins: + items: + enum: [PB2, PB3] + - if: + properties: + function: + const: timer6 + then: + properties: + pins: + items: + enum: [PB4, PB5, PB6, PB7] + - if: + properties: + function: + const: uart2 + then: + properties: + pins: + items: + enum: [PB8, PB9] + - if: + properties: + function: + const: can2 + then: + properties: + pins: + items: + enum: [PB10, PB11] + - if: + properties: + function: + const: spi2 + then: + properties: + pins: + items: + enum: [PB12, PB13, PB14, PB15, PB16] + - if: + properties: + function: + const: spi3 + then: + properties: + pins: + items: + enum: [PB17, PB18, PB19, PB20, PB21] + - if: + properties: + function: + const: mclk0 + then: + properties: + pins: + items: + enum: [PB22] + +required: + - compatible + - reg + +additionalProperties: false -- 2.43.2
Powered by blists - more mailing lists