[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240221-rb3gen2-dp-connector-v1-3-dc0964ef7d96@quicinc.com>
Date: Wed, 21 Feb 2024 15:19:11 -0800
From: Bjorn Andersson <quic_bjorande@...cinc.com>
To: Rob Clark <robdclark@...il.com>,
Abhinav Kumar
<quic_abhinavk@...cinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Sean Paul <sean@...rly.run>,
Marijn Suijten <marijn.suijten@...ainline.org>,
David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>,
<cros-qcom-dts-watchers@...omium.org>,
Bjorn Andersson
<andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring
<robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
CC: <linux-arm-msm@...r.kernel.org>, <dri-devel@...ts.freedesktop.org>,
<freedreno@...ts.freedesktop.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>,
Bjorn Andersson <quic_bjorande@...cinc.com>
Subject: [PATCH 3/9] arm64: dts: qcom: sc7280: Enable MDP turbo mode
The max frequency listed in the DPU opp-table is 506MHz, this is not
sufficient to drive a 4k@60 display, resulting in constant underrun.
Add the missing MDP_CLK turbo frequency of 608MHz to the opp-table to
fix this.
Signed-off-by: Bjorn Andersson <quic_bjorande@...cinc.com>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index a19c278ebec9..a2a6717c6c87 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -4417,6 +4417,11 @@ opp-506666667 {
opp-hz = /bits/ 64 <506666667>;
required-opps = <&rpmhpd_opp_nom>;
};
+
+ opp-608000000 {
+ opp-hz = /bits/ 64 <608000000>;
+ required-opps = <&rpmhpd_opp_turbo>;
+ };
};
};
--
2.25.1
Powered by blists - more mailing lists