linux-kernel - Re: [PATCH 5/9] arm64: dts: qcom: qcs6490-rb3gen2: Enable adsp and cdsp

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Thu, 22 Feb 2024 01:42:10 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Bjorn Andersson <quic_bjorande@...cinc.com>
Cc: Rob Clark <robdclark@...il.com>, Abhinav Kumar <quic_abhinavk@...cinc.com>, 
	Sean Paul <sean@...rly.run>, Marijn Suijten <marijn.suijten@...ainline.org>, 
	David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>, cros-qcom-dts-watchers@...omium.org, 
	Bjorn Andersson <andersson@...nel.org>, Konrad Dybcio <konrad.dybcio@...aro.org>, 
	Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, 
	Conor Dooley <conor+dt@...nel.org>, linux-arm-msm@...r.kernel.org, 
	dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org, 
	linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH 5/9] arm64: dts: qcom: qcs6490-rb3gen2: Enable adsp and cdsp

On Thu, 22 Feb 2024 at 01:19, Bjorn Andersson <quic_bjorande@...cinc.com> wrote:
>
> Define firmware paths and enable the ADSP and CDSP remoteprocs.
>
> Signed-off-by: Bjorn Andersson <quic_bjorande@...cinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> index 32313f47602a..ab498494caea 100644
> --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> @@ -451,6 +451,16 @@ &qupv3_id_0 {
>         status = "okay";
>  };
>
> +&remoteproc_adsp {
> +       firmware-name = "qcom/qcs6490/rb3gen2/adsp.mbn";

This should be either

       firmware-name = "qcom/qcs6490/adsp.mbn";

or

       firmware-name = "qcom/qcs6490/Vendor/rb3gen2/adsp.mbn";


> +       status = "okay";
> +};
> +
> +&remoteproc_cdsp {
> +       firmware-name = "qcom/qcs6490/rb3gen2/cdsp.mbn";
> +       status = "okay";
> +};
> +
>  &tlmm {
>         gpio-reserved-ranges = <32 2>, /* ADSP */
>                                <48 4>; /* NFC */
>
> --
> 2.25.1
>


-- 
With best wishes
Dmitry