lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240221062107.778661-6-o.rempel@pengutronix.de>
Date: Wed, 21 Feb 2024 07:21:04 +0100
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Wei Fang <wei.fang@....com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>,
	kernel@...gutronix.de,
	linux-kernel@...r.kernel.org,
	netdev@...r.kernel.org,
	Shenwei Wang <shenwei.wang@....com>,
	Clark Wang <xiaoning.wang@....com>,
	NXP Linux Team <linux-imx@....com>
Subject: [PATCH net-next v5 5/8] net: phy: Immediately call adjust_link if only tx_lpi_enabled changes

From: Andrew Lunn <andrew@...n.ch>

The MAC driver changes its EEE hardware configuration in its
adjust_link callback. This is called when auto-neg
completes. Disabling EEE via eee_enabled false will trigger an
autoneg, and as a result the adjust_link callback will be called with
phydev->enable_tx_lpi set to false. Similarly, eee_enabled set to true
and with a change of advertised link modes will result in a new
autoneg, and a call the adjust_link call.

If set_eee is called with only a change to tx_lpi_enabled which does
not trigger an auto-neg, it is necessary to call the adjust_link
callback so that the MAC is reconfigured to take this change into
account.

When setting phydev->enable_tx_lpi, take both eee_enabled and
tx_lpi_enabled into account, so the MAC drivers just needs to act on
phydev->enable_tx_lpi and not the whole EEE configuration.

Signed-off-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
 drivers/net/phy/phy-c45.c | 11 ++++++++---
 drivers/net/phy/phy.c     | 25 ++++++++++++++++++++++---
 2 files changed, 30 insertions(+), 6 deletions(-)

diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index c69568e7695e..217d4df59eb6 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -1549,6 +1549,8 @@ EXPORT_SYMBOL(genphy_c45_ethtool_get_eee);
  * advertised, but the previously advertised link modes are
  * retained. This allows EEE to be enabled/disabled in a
  * non-destructive way.
+ * Returns either error code, 0 if there was no change, or positive
+ * value if there was a change which triggered auto-neg.
  */
 int genphy_c45_ethtool_set_eee(struct phy_device *phydev,
 			       struct ethtool_keee *data)
@@ -1580,9 +1582,12 @@ int genphy_c45_ethtool_set_eee(struct phy_device *phydev,
 	ret = genphy_c45_an_config_eee_aneg(phydev);
 	if (ret < 0)
 		return ret;
-	if (ret > 0)
-		return phy_restart_aneg(phydev);
-
+	if (ret > 0) {
+		ret = phy_restart_aneg(phydev);
+		if (ret < 0)
+			return ret;
+		return 1;
+	}
 	return 0;
 }
 EXPORT_SYMBOL(genphy_c45_ethtool_set_eee);
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 7f3629d56503..dad827717ad9 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -988,7 +988,8 @@ static int phy_check_link_status(struct phy_device *phydev)
 		if (err < 0)
 			phydev->enable_tx_lpi = false;
 		else
-			phydev->enable_tx_lpi = err;
+			phydev->enable_tx_lpi = (err & phydev->eee_cfg.tx_lpi_enabled);
+
 		phy_link_up(phydev);
 	} else if (!phydev->link && phydev->state != PHY_NOLINK) {
 		phydev->state = PHY_NOLINK;
@@ -1679,6 +1680,21 @@ int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_keee *data)
 }
 EXPORT_SYMBOL(phy_ethtool_get_eee);
 
+/* auto-neg not triggered, directly inform the MAC if something
+ * changed'
+ */
+static void phy_ethtool_set_eee_noneg(struct phy_device *phydev,
+				      struct ethtool_keee *data)
+{
+	if (phydev->eee_cfg.tx_lpi_enabled !=
+	    data->tx_lpi_enabled) {
+		eee_to_eeecfg(data, &phydev->eee_cfg);
+		phydev->enable_tx_lpi = eeecfg_mac_can_tx_lpi(&phydev->eee_cfg);
+		if (phydev->link)
+			phy_link_up(phydev);
+	}
+}
+
 /**
  * phy_ethtool_set_eee - set EEE supported and status
  * @phydev: target phy_device struct
@@ -1695,11 +1711,14 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_keee *data)
 
 	mutex_lock(&phydev->lock);
 	ret = genphy_c45_ethtool_set_eee(phydev, data);
-	if (!ret)
+	if (ret >= 0) {
+		if (ret == 0)
+			phy_ethtool_set_eee_noneg(phydev, data);
 		eee_to_eeecfg(data, &phydev->eee_cfg);
+	}
 	mutex_unlock(&phydev->lock);
 
-	return ret;
+	return (ret < 0 ? ret : 0);
 }
 EXPORT_SYMBOL(phy_ethtool_set_eee);
 
-- 
2.39.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ