lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Wed, 21 Feb 2024 11:00:44 +0100
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
To: Rafał Miłecki <zajec5@...il.com>,
 Matthias Brugger <matthias.bgg@...il.com>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
 Conor Dooley <conor+dt@...nel.org>
Cc: Chen-Yu Tsai <wenst@...omium.org>, Hsin-Yi Wang <hsinyi@...omium.org>,
 Nícolas F . R . A . Prado <nfraprado@...labora.com>,
 Heiko Stuebner <heiko.stuebner@...rry.de>,
 Jernej Skrabec <jernej.skrabec@...il.com>,
 Chris Morgan <macromorgan@...mail.com>,
 Linus Walleij <linus.walleij@...aro.org>, Sean Wang
 <sean.wang@...iatek.com>, devicetree@...r.kernel.org,
 linux-arm-kernel@...ts.infradead.org, linux-mediatek@...ts.infradead.org,
 linux-kernel@...r.kernel.org, Rafał Miłecki
 <rafal@...ecki.pl>
Subject: Re: [PATCH 3/4] arm64: dts: mediatek: mt7981: add pinctrl

Il 21/02/24 08:35, Rafał Miłecki ha scritto:
> From: Rafał Miłecki <rafal@...ecki.pl>
> 
> MT7981 contains on-SoC PIN controller that is also a GPIO provider.
> 
> Signed-off-by: Rafał Miłecki <rafal@...ecki.pl>
> ---
>   arch/arm64/boot/dts/mediatek/mt7981b.dtsi | 37 +++++++++++++++++++++++
>   1 file changed, 37 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
> index 4feff3d1c5f4..fdd5c22cfc9c 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
> @@ -86,6 +86,43 @@ pwm@...48000 {
>   			#pwm-cells = <2>;
>   		};
>   
> +		pio: pinctrl@...00000 {
> +			compatible = "mediatek,mt7981-pinctrl";
> +			reg = <0 0x11d00000 0 0x1000>,
> +			      <0 0x11c00000 0 0x1000>,
> +			      <0 0x11c10000 0 0x1000>,
> +			      <0 0x11d20000 0 0x1000>,
> +			      <0 0x11e00000 0 0x1000>,
> +			      <0 0x11e20000 0 0x1000>,
> +			      <0 0x11f00000 0 0x1000>,
> +			      <0 0x11f10000 0 0x1000>,
> +			      <0 0x1000b000 0 0x1000>;
> +			reg-names = "gpio", "iocfg_rt", "iocfg_rm", "iocfg_rb", "iocfg_lb",
> +				    "iocfg_bl", "iocfg_tm", "iocfg_tl", "eint";
> +			interrupt-controller;
> +			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-parent = <&gic>;
> +			gpio-ranges = <&pio 0 0 56>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			#interrupt-cells = <2>;
> +
> +			mdio-pins {
> +				mux {

That's board specific. MDIO and SPI0 pins can be used as GPIO instead of,
respectively, ETH and SPI.

Must go to your board devicetree, not here: please move both.

Cheers,
Angelo

> +					function = "eth";
> +					groups = "smi_mdc_mdio";
> +				};
> +			};
> +
> +			spi0-pins {
> +				mux {
> +					function = "spi";
> +					groups = "spi0", "spi0_wp_hold";
> +				};
> +			};
> +
> +		};
> +
>   		clock-controller@...00000 {
>   			compatible = "mediatek,mt7981-ethsys", "syscon";
>   			reg = <0 0x15000000 0 0x1000>;


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ