linux-kernel - Re: [PATCH v3 1/1] dt-bindings: pci: layerscape-pci: Convert to yaml format

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240222-cardboard-mousiness-1f0cc1389f5d@spud>
Date: Thu, 22 Feb 2024 18:34:30 +0000
From: Conor Dooley <conor@...nel.org>
To: Frank Li <Frank.li@....com>
Cc: Lorenzo Pieralisi <lpieralisi@...nel.org>,
	Krzysztof Wilczyński <kw@...ux.com>,
	Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	"open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS" <linux-pci@...r.kernel.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@...r.kernel.org>,
	open list <linux-kernel@...r.kernel.org>, imx@...ts.linux.dev
Subject: Re: [PATCH v3 1/1] dt-bindings: pci: layerscape-pci: Convert to yaml
 format

On Mon, Feb 19, 2024 at 04:36:10PM -0500, Frank Li wrote:
> On Wed, Feb 14, 2024 at 02:41:44PM -0500, Frank Li wrote:
> > Convert the layerscape-pci PCIe binding document to yaml format.
> > 
> > Additionally, changes for the layerscape-pci endpoint part:
> > - Add interrupt name 'pme' restriction for fsl,ls1028a-pcie-ep,
> > fsl,ls1046a-pcie-ep, and fsl,ls1088a-pcie-ep.
> > - Add register name restrictions: 'reg' and 'addr_space'. 'addr_space' is
> > required by snps,dw-pcie-ep.
> > - Add an example.
> > 
> > Changes for the layerscape-pci root complex part:
> > - Add required property: 'reg-names', "#address-cells", "#size-cells",
> > 'device_type', 'bus-range', 'ranges', "#interrupt-cells",
> > 'interrupt-map-mask' and 'interrupt-map'.
> > - Interrupt-names requirement split to each compatible string.
> > - Add register name restrictions: 'reg' and 'config'. 'config' is required
> > by snps,dw-pcie.
> 
> @conor
>     Any comments about this one?

Sorry I missed this - I've been sick the last week and probably
overzealously deleted stuff from my mailbox. I see Rob replied to this
as I was in the process of reading through the patch, so I only left two
minor comments here.


> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    soc {
> > +      #address-cells = <2>;
> > +      #size-cells = <2>;
> > +
> > +      pcie_ep1: pcie-ep@...0000 {

Nit: unused label.

> > +allOf:
> > +  - $ref: /schemas/pci/pci-bus.yaml#
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          enum:
> > +            - fsl,lx2160a-pcie
> > +    then:
> > +      properties:
> > +        interrupts:
> > +          maxItems: 2
> > +        interrupt-names:
> > +          items:
> > +            - const: pme
> > +            - const: aer
> > +            - const: intr

You set maxItems to 2 but there are 3 names. That doesn't seem right!

Chers,
Conor.

Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)