[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240223-clk-mv200-v4-1-3e37e501d407@outlook.com>
Date: Fri, 23 Feb 2024 03:40:11 +0800
From: Yang Xiwen via B4 Relay <devnull+forbidden405.outlook.com@...nel.org>
To: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: David Yang <mmyangfl@...il.com>, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Yang Xiwen <forbidden405@...look.com>
Subject: [PATCH v4 1/7] dt-bindings: clock: convert hisi-crg.txt to YAML
From: Yang Xiwen <forbidden405@...look.com>
Also rename to hisilicon,hisi-crg.yaml. While at it, add "syscon" and
"simple-mfd" compatibles to match the existing hi3798cv200.dtsi.
Add reset-controller subnode for hisilicon,hi3798cv200-crg to match the
existing hi3798cv200.dtsi.
Signed-off-by: Yang Xiwen <forbidden405@...look.com>
---
.../devicetree/bindings/clock/hisi-crg.txt | 50 ---------------
.../bindings/clock/hisilicon,hisi-crg.yaml | 74 ++++++++++++++++++++++
2 files changed, 74 insertions(+), 50 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/hisi-crg.txt b/Documentation/devicetree/bindings/clock/hisi-crg.txt
deleted file mode 100644
index cc60b3d423f3..000000000000
--- a/Documentation/devicetree/bindings/clock/hisi-crg.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* HiSilicon Clock and Reset Generator(CRG)
-
-The CRG module provides clock and reset signals to various
-modules within the SoC.
-
-This binding uses the following bindings:
- Documentation/devicetree/bindings/clock/clock-bindings.txt
- Documentation/devicetree/bindings/reset/reset.txt
-
-Required Properties:
-
-- compatible: should be one of the following.
- - "hisilicon,hi3516cv300-crg"
- - "hisilicon,hi3516cv300-sysctrl"
- - "hisilicon,hi3519-crg"
- - "hisilicon,hi3798cv200-crg"
- - "hisilicon,hi3798cv200-sysctrl"
-
-- reg: physical base address of the controller and length of memory mapped
- region.
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes use this identifier
-to specify the clock which they consume.
-
-All these identifier could be found in <dt-bindings/clock/hi3519-clock.h>.
-
-- #reset-cells: should be 2.
-
-A reset signal can be controlled by writing a bit register in the CRG module.
-The reset specifier consists of two cells. The first cell represents the
-register offset relative to the base address. The second cell represents the
-bit index in the register.
-
-Example: CRG nodes
-CRG: clock-reset-controller@...10000 {
- compatible = "hisilicon,hi3519-crg";
- reg = <0x12010000 0x10000>;
- #clock-cells = <1>;
- #reset-cells = <2>;
-};
-
-Example: consumer nodes
-i2c0: i2c@...10000 {
- compatible = "hisilicon,hi3519-i2c";
- reg = <0x12110000 0x1000>;
- clocks = <&CRG HI3519_I2C0_RST>;
- resets = <&CRG 0xe4 0>;
-};
diff --git a/Documentation/devicetree/bindings/clock/hisilicon,hisi-crg.yaml b/Documentation/devicetree/bindings/clock/hisilicon,hisi-crg.yaml
new file mode 100644
index 000000000000..251156905a7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hisilicon,hisi-crg.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/hisilicon,hisi-crg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon SOC Clock and Reset Generator (CRG) module
+
+maintainers:
+ - Yang Xiwen <forbidden405@...mail.com>
+
+description: |
+ Hisilicon SOC clock control module which supports the clocks, resets and
+ power domains on various SoCs.
+
+properties:
+ compatible:
+ oneOf:
+ - const: hisilicon,hi3519-crg
+ - items:
+ - enum:
+ - hisilicon,hi3798cv200-crg
+ - hisilicon,hi3798cv200-sysctrl
+ - hisilicon,hi3516cv300-crg
+ - hisilicon,hi3516cv300-sysctrl
+ - const: syscon
+ - const: simple-mfd
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 2
+ description: |
+ First cell is reset request register offset.
+ Second cell is bit offset in reset request register.
+
+ reset-controller:
+ type: object
+ description: |
+ Reset controller for Hi3798CV200 GMAC module
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: hisilicon,hi3798cv200-crg
+ then:
+ required:
+ - reset-controller
+ else:
+ properties:
+ reset-controller: false
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-reset-controller@...10000 {
+ compatible = "hisilicon,hi3519-crg";
+ reg = <0x12010000 0x10000>;
+ #clock-cells = <1>;
+ #reset-cells = <2>;
+ };
--
2.43.0
Powered by blists - more mailing lists