[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240222075806.1816400-4-yukuai1@huaweicloud.com>
Date: Thu, 22 Feb 2024 15:57:59 +0800
From: Yu Kuai <yukuai1@...weicloud.com>
To: paul.e.luse@...ux.intel.com,
song@...nel.org,
neilb@...e.com,
shli@...com
Cc: linux-raid@...r.kernel.org,
linux-kernel@...r.kernel.org,
yukuai3@...wei.com,
yukuai1@...weicloud.com,
yi.zhang@...wei.com,
yangerkun@...wei.com
Subject: [PATCH md-6.9 03/10] md/raid1: fix choose next idle in read_balance()
From: Yu Kuai <yukuai3@...wei.com>
Commit 12cee5a8a29e ("md/raid1: prevent merging too large request") add
the case choose next idle in read_balance():
read_balance:
for_each_rdev
if(next_seq_sect == this_sector || disk == 0)
-> sequential reads
best_disk = disk;
if (...)
choose_next_idle = 1
continue;
for_each_rdev
-> iterate next rdev
if (pending == 0)
best_disk = disk;
-> choose the next idle disk
break;
if (choose_next_idle)
-> keep using this rdev if there are no other idle disk
contine
However, commit 2e52d449bcec ("md/raid1: add failfast handling for reads.")
remove the code:
- /* If device is idle, use it */
- if (pending == 0) {
- best_disk = disk;
- break;
- }
Hence choose next idle will never work now, fix this problem by
following:
1) don't set best_disk in this case, read_balance() will choose the best
disk after iterating all the disks;
2) add 'pending' so that other idle disk will be chosen;
3) set 'dist' to 0 so that if there is no other idle disk, and all disks
are rotational, this disk will still be chosen;
Fixes: 2e52d449bcec ("md/raid1: add failfast handling for reads.")
Co-developed-by: Paul Luse <paul.e.luse@...ux.intel.com>
Signed-off-by: Paul Luse <paul.e.luse@...ux.intel.com>
Signed-off-by: Yu Kuai <yukuai3@...wei.com>
---
drivers/md/raid1.c | 21 ++++++++++++---------
1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index c60ea58ae8c5..d0bc67e6d068 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -604,7 +604,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
unsigned int min_pending;
struct md_rdev *rdev;
int choose_first;
- int choose_next_idle;
/*
* Check if we can balance. We can balance on the whole
@@ -619,7 +618,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
best_pending_disk = -1;
min_pending = UINT_MAX;
best_good_sectors = 0;
- choose_next_idle = 0;
clear_bit(R1BIO_FailFast, &r1_bio->state);
if ((conf->mddev->recovery_cp < this_sector + sectors) ||
@@ -712,7 +710,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
int opt_iosize = bdev_io_opt(rdev->bdev) >> 9;
struct raid1_info *mirror = &conf->mirrors[disk];
- best_disk = disk;
/*
* If buffered sequential IO size exceeds optimal
* iosize, check if there is idle disk. If yes, choose
@@ -731,15 +728,21 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
mirror->next_seq_sect > opt_iosize &&
mirror->next_seq_sect - opt_iosize >=
mirror->seq_start) {
- choose_next_idle = 1;
- continue;
+ /*
+ * Add 'pending' to avoid choosing this disk if
+ * there is other idle disk.
+ * Set 'dist' to 0, so that if there is no other
+ * idle disk and all disks are rotational, this
+ * disk will still be chosen.
+ */
+ pending++;
+ dist = 0;
+ } else {
+ best_disk = disk;
+ break;
}
- break;
}
- if (choose_next_idle)
- continue;
-
if (min_pending > pending) {
min_pending = pending;
best_pending_disk = disk;
--
2.39.2
Powered by blists - more mailing lists